TN236 Trencher for Mini Tool Carrier

The ideal solution when you need to cut a trench in a tight space, the TN236 Trencher is small but aggressive. A great tool for landscapers, the TN236 Trencher is trencher for mini-skidsteers and mini track loaders between 1500 - 4000 lbs. The TN236 will cut trenches up to 36” deep and between 4” to 6” wide, depending on the chain option. The TN236 Trencher is powered by a hydraulic drive system. With no roller chain to worry about, the motor drive unit delivers hydraulic power directly to the sprocket of the digging chain for optimal trenching performance.

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

OPTIONAL D006290 BOBCAT CHEATER ADAPTER PLATE

Easily attach any standard Mini Skidsteer attachment to your Bobcat Mini Skidsteer using our optional D006290 Bobcat mount cheater adapter plate. The cheater plate is pin mounted and has vertical adjustment holes. (20% discount if ordered/shipped with any whole good)


CLICK HERE FOR DRAWING.

side auger

Baumalight Trenchers are designed with a convenient side auger. The side auger keeps the dirt clear from the trenching action but still near the trench when it’s time for back filling.

Trenchaxe side auger

crumb scraper bar

The Trencher has a crumb scraper bar as standard equipment, this helps to scrape and sweep extra dirt and debris into the chain where it is lifted out of the trench. The heavy construction and hinged design mean that the scraper performs no matter what depth of trench you are digging.

Crumb scraper bar

solid steel nose

The Baumalight Trencher’s heavy duty nose is precision machined from a piece of solid steel. It runs freely on dual tapered roller bearings to deal with the extreme forces of trenching.

Dirt is the enemy of all bearings. A precision machined washer protects the bearings from rocks and dirt. This initial barricade is reinforced by the rubber seal on the bearings, finishing the job is the easily accessible grease fitting which keeps the bearings lubricated and protected from moisture and keeps our nose running freely.

Solid steel nose

adjustable chain tension

Adjusting the chain tension with a couple of pumps. The grease cylinder tensioner allows you to adjust the tension of the chain quickly with only a grease gun. By applying grease to an internal cylinder the roller nose is pushed forward taking the slack out of the chain. What could be a long frustrating process is now a few quick pumps.

Adjustable chain tension

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS



  TN236 TNM336B TN336 TN548 TN560 TN760
Mount Standard Mini skindsteer Bobcat mini skidsteer Universial skidsteer Universial skidsteer Universial skidsteer Universial skidsteer
Trench depth 36" 36" 36" 48" 60" 60"
Trench width 4" to 6" 4" to 6" 4" to 6" 6" to 10" 6" to 10" 6" to 10"
Drive type Direct drive Direct drive Planetary Planetary Planetary Planetary
Main shaft size 1:10 taper hardened shaft 1:10 taper hardened shaft 1:10 taper hardened shaft 2-9/16" solid hardened steel 2-9/16" solid hardened steel 2-9/16" solid hardened steel
Trencher chain torque at 3,000 PSI 6,703 lbs-in 6,703 lbs-in 14,571 lbs-in 21,856 lbs-in 21,856 lbs-in 33,877 lbs-in
Over torque protection Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief
Horse Power (HP) 10 - 25 10 - 25 30 - 55 40 - 100 40 - 100 40 - 100
Carrier weight (lb) 1,500 - 4,000 1,500 - 4,000 2,000 - 5,000 3,000 - 7,000 3,000 - 7,000 4,000 - 12,000
Min. / Max. GPM Skidsteer 7 to 18 7 to 18 10 to 20 15 to 25 12 to 25 20 to 42
Min. / Max. GPM Tractor N/A N/A 14 to 22 15 to 25 N/A N/A
Weight 470 lb 675 lb 850 lb 1,250 lb 1,500 lb 1800 lb
TrenchAxe TrenchAxe

Chain Options

The included chain is equipped with hardened and reinforced cup style cutting teeth. Optional and replacement chains are available in 4" and 6" widths. Depending on your trenching needs a bullet style tooth is also available for rocky soil conditions. Contact us for help picking your chain size and teeth style and configuration.

Model TN236

DESCRIPTION CHAIN OPTION WEIGHT (Lbs)
36“ x 4" Standard cup tooth chain S3604 810
36“ x 6" Standard cup tooth chain S3606 820
36“ x 4" 50/50 rock & cup tooth chain M3604 830
36“ x 6” 50/50 rock & cup tooth chain M3606 840

logo
logo
Updated as of April 12, 2024 4:47 PM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description

TRENCHERS

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
TN236-S3604
TN236-S3606
TN236-M3604
TN236-M3606
TNM336B-M3604 Bobcat mini trencher
TNM336B-M3606 Bobcat mini trencher
TNM336B-S3604 Bobcat mini trencher
TNM336B-S3606 Bobcat mini trencher
TN336-S3604
TN336-S3606
TN336-M3604
TN336-M3606
TN548-S4806
TN548-M4806
TN548-S4808
TN548-M4808
TN548-S4810
TN548-M4810
TN560-S6006
TN560-M6006
TN560-S6008
TN560-M6008
TN560-S6010
TN560-M6010
TN760-M6006 High flow
TN760-M6008 High flow
TN760-M6010 High flow
TN760-S6006 High flow
TN760-S6008 High flow
TN760-S6010 High flow
3-Point Adapter Add 5 days for D003074

PUBLIC HOLIDAYS

Date Description
2024-05-20Victoria Day