No matter what your trenching task is, Baumalighnt’s TN548 is up for the job. Quickly and safely bury valuable cables and utility lines underground and out of harm’s way. The TN548 Trencher will easily cut trenches up to 48” deep and between 6” to 10” wide, depending on the chain option. The TN548 is powered by a powerful planetary drive system. With no roller chain to worry about, the planetary drive unit delivers hydraulic power directly to the sprocket of the digging chain for optimal trenching performance.
For even more versatility, the TN548 Trencher can be mounted to a skidsteers between 3000 and 7000 lbs. or use this Trencher on your tractor using the optional 3-point hitch mount.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
This Baumalight Trencher can also be mounted to a tractor. The optional 3-point hitch tractor mount has a cylinder that provides angle and depth control. To use this 3PH adapter, your tractor must have a hydro-static drive. Two hydraulic remotes are required, kits are available for tractors with only one set of external hydraulic connections.
Part number D001393 - 3 Point Hitch Trench AXE Adaptor (bolt on - does not include S1050).
This optional external control kit is mounted on an adjustable arm. The control is great for smaller tractors with limited HP and for tractors with only one hydraulic remote.
Part number S1050 - Valve kit for tractors with one remote (add $550 if shipping for field install).
Baumalight Trenchers are designed with a convenient side auger. The side auger keeps the dirt clear from the trenching action but still near the trench when it’s time for back filling.
The Trencher has a crumb scraper bar as standard equipment, this helps to scrape and sweep extra dirt and debris into the chain where it is lifted out of the trench. The heavy construction and hinged design mean that the scraper performs no matter what depth of trench you are digging.
The sealed drive keeps the dirt out and the trencher going. The compact and strong planetary drive unit delivers the hydraulic power directly to the sprocket of the digging chain for good digging performance. There are no roller chains that jump or stretch. Maximum torque transfer. The motor is mounted directly in-line with the main sprocket.
The Baumalight Trencher’s heavy duty nose is precision machined from a piece of solid steel. It runs freely on dual tapered roller bearings to deal with the extreme forces of trenching.
Dirt is the enemy of all bearings. A precision machined washer protects the bearings from rocks and dirt. This initial barricade is reinforced by the rubber seal on the bearings, finishing the job is the easily accessible grease fitting which keeps the bearings lubricated and protected from moisture and keeps our nose running freely.
Adjusting the chain tension with a couple of pumps. The grease cylinder tensioner allows you to adjust the tension of the chain quickly with only a grease gun. By applying grease to an internal cylinder the roller nose is pushed forward taking the slack out of the chain. What could be a long frustrating process is now a few quick pumps.
|Mount||Standard Mini skindsteer||Bobcat mini skidsteer||Universial skidsteer||Universial skidsteer||Universial skidsteer||Universial skidsteer|
|Trench width||4" to 6"||4" to 6"||4" to 6"||6" to 10"||6" to 10"||6" to 10"|
|Drive type||Direct drive||Direct drive||Direct drive||Planetary||Planetary||Planetary|
|Main shaft size||1:10 taper hardened shaft||1:10 taper hardened shaft||1:10 taper hardened shaft||2-9/16" solid hardened steel||2-9/16" solid hardened steel||2-9/16" solid hardened steel|
|Trencher chain torque at 3,000 PSI||6,703 lbs-in||6,703 lbs-in||14,571 lbs-in||21,856 lbs-in||21,856 lbs-in||33,877 lbs-in|
|Over torque protection||Hydraulic relief||Hydraulic relief||Hydraulic relief||Hydraulic relief||Hydraulic relief||Hydraulic relief|
|Horse Power (HP)||10 - 25||10 - 25||30 - 55||40 - 100||40 - 100||40 - 100|
|Carrier weight (lb)||1,500 - 4,000||1,500 - 4,000||2,000 - 5,000||3,000 - 7,000||3,000 - 7,000||4,000 - 12,000|
|Min. / Max. GPM Skidsteer||7 to 18||7 to 18||10 to 20||12 to 25||12 to 25||20 to 42|
|Min. / Max. GPM Tractor||N/A||N/A||14 to 22||15 to 25||N/A||N/A|
|Weight||470 lb||675 lb||850 lb||1,250 lb||1,500 lb||1800 lb|
The included chain is equipped with Hardened and reinforced cup style cutting teeth. Optional and replacement chains are available in 6", 8" and 10" widths. Depending on your trenching needs a bullet style tooth is also available for rocky soil conditions. Contact us for help picking your chain size and teeth style and configuration.
|DESCRIPTION||CHAIN OPTION||WEIGHT (Lbs)|
|48“ x 6" Standard cup tooth chain||S4806||1250|
|48“ x 8" Standard cup tooth chain||S4808||1260|
|48“ x 10" Standard cup tooth chain||S4810||1270|
|48“ x 6” 50/50 rock & cup tooth chain||M4806||1284|
|48“ x 8” 50/50 rock & cup tooth chain||M4808||1290|
|48“ x 10” 50/50 rock & cup tooth chain||M4810||1310|
|2023-12-22||Closed for entire Christmas week (closed for shipping only on 22nd)|
|2023-12-25||Closed for entire Christmas week|
|2023-12-26||Closed for entire Christmas week|
|2023-12-27||Closed for entire Christmas week|
|2023-12-28||Closed for entire Christmas week|
|2023-12-29||Closed for entire Christmas week|
|2024-01-01||Closed for entire Christmas week & New years Day|