TN760 Trencher for Skidsteer

Cut deep trenchers with even more power with the TN760, Baumalight’s most powerful trencher for skidsteers for high flow hydraulics. Save time and money the next time you need to cut a trench to safely bury water lines, gas lines, drainage pipe or electrical lines. Ideal for farmers, landscapers or contractors, Baumalight’s TN760 Trencher will quickly cut trenches an impressive 5 feet deep and between 6” to 10” wide. The TN760 Trencher is powered by a how flow motor for up to 40 gpm planetary drive system. With no roller chain to worry about, the planetary drive unit delivers hydraulic power directly to the sprocket of the digging chain for optimal trenching performance.
The TN760 Trencher can be mounted to a skidsteers between 4000 and 11,000 lbs.


All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

side auger

Baumalight Trenchers are designed with a convenient side auger. The side auger keeps the dirt clear from the trenching action but still near the trench when it’s time for back filling.

TrenchAxe side auger

crumb scraper bar

The Trencher has a crumb scraper bar as standard equipment, this helps to scrape and sweep extra dirt and debris into the chain where it is lifted out of the trench. The heavy construction and hinged design mean that the scraper performs no matter what depth of trench you are digging.

Crumb scraper bar


The sealed drive keeps the dirt out and the trencher going. The compact and stron g planetary drive unit delivers the hydraulic power directly to the sprocket of the digging chain for good digging performance. There are no roller chains that jump or stretch. Maximum torque transfer. The motor is mounted directly in-line with the main sprocket.

Planetary Drive System

solid steel nose

The Baumalight Trencher’s heavy duty nose is precision machined from a piece of solid steel. It runs freely on dual tapered roller bearings to deal with the extreme forces of trenching.

Dirt is the enemy of all bearings. A precision machined washer protects the bearings from rocks and dirt. This initial barricade is reinforced by the rubber seal on the bearings, finishing the job is the easily accessible grease fitting which keeps the bearings lubricated and protected from moisture and keeps our nose running freely.

Solid steel nose

adjustable chain tension

Adjusting the chain tension with a couple of pumps. The grease cylinder tensioner allows you to adjust the tension of the chain quickly with only a grease gun. By applying grease to an internal cylinder the roller nose is pushed forward taking the slack out of the chain. What could be a long frustrating process is now a few quick pumps.

Adjustable chain tension

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.

  TN236 TNM336B TN336 TN548 TN560 TN760
Mount Standard Mini skindsteer Bobcat mini skidsteer Universial skidsteer Universial skidsteer Universial skidsteer Universial skidsteer
Trench depth 36" 36" 36" 48" 60" 60"
Trench width 4" to 6" 4" to 6" 4" to 6" 6" to 10" 6" to 10" 6" to 10"
Drive type Direct drive Direct drive Direct drive Planetary Planetary Planetary
Main shaft size 1:10 taper hardened shaft 1:10 taper hardened shaft 1:10 taper hardened shaft 2-9/16" solid hardened steel 2-9/16" solid hardened steel 2-9/16" solid hardened steel
Trencher chain torque at 3,000 PSI 6,703 lbs-in 6,703 lbs-in 14,571 lbs-in 21,856 lbs-in 21,856 lbs-in 33,877 lbs-in
Over torque protection Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief Hydraulic relief
Horse Power (HP) 10 - 25 10 - 25 30 - 55 40 - 100 40 - 100 40 - 100
Carrier weight (lb) 1,500 - 4,000 1,500 - 4,000 2,000 - 5,000 3,000 - 7,000 3,000 - 7,000 4,000 - 12,000
Min. / Max. GPM Skidsteer 7 to 18 7 to 18 10 to 20 12 to 25 12 to 25 20 to 42
Min. / Max. GPM Tractor N/A N/A 14 to 22 15 to 25 N/A N/A
Weight 470 lb 675 lb 850 lb 1,250 lb 1,500 lb 1800 lb
TrenchAxe TrenchAxe

Chain Options

The included chain is equipped with Hardened and reinforced cup style cutting teeth. Optional and replacement chains are available in 6", 8" and 10" widths. Depending on your trenching needs a bullet style tooth is also available for rocky soil conditions. Contact us for help picking your chain size and teeth style and configuration.

Model TN760

60“ x 6" Standard cup tooth chain S6006 1675
60“ x 8" Standard cup tooth chain S6008 1686
60“ x 10" Standard cup tooth chain S6010 1697
60“ x 6” 50/50 rock & cup tooth chain M6006 1712
60“ x 8” 50/50 rock & cup tooth chain M6008 1719
60“ x 10” 50/50 rock & cup tooth chain M6010 1741

Updated as of September 28, 2023 10:54 AM EDT


Date Description


Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
TN236 Mini skidsteer
TNM336B-M3604 Bobcat mini trencher
TN760 High flow
3-Point Adapter Add 5 days for D003074


Date Description
2023-10-09Canadian Thanks Giving