Designed for mobile or standby electrical power, the QC PTO generator for 480 volt three phase models are ideal for your farm or rural property. At 100% load, these QC PTO models offer 33 KW to 113 KW and momentary surge from 85 KW up to 315 KW. The -4 480 volt configuration features a different panel as well as a different breaker and doesn’t include the welder receptacle or the 20 amp duplex receptacles. To determine exactly how much power you need, you can find specific information on our website by using our Power Calculator as well as our Principles Chart, which outlines which QC PTO generator model will best suit your property’s power requirements.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
Pairing your PTO generator with your tractor’s powerful engine and converting that power into electricity gives you a convenient and reliable back-up and remote power solution for your property – simply by using your tractor. Before setting your PTO speed, ensure that the PTO driveline is perpendicular with the generator transmission. If necessary, remove the bolt and adjust the trailer tongue. This will help the shaft to stay straight with no bend in the universal joint on the generator side while ensuring a more consistent PTO speed and helping with vibration.
QC PTO generators provide convenient and reliable back-up and remote power for your property – simply by using your tractor. All QC PTO generators come with a full-load main outlet, along with a higher-than-average number of plug-in options – giving you several different ways to use your generator.
QC PTO Generator connection panels feature full load connectors with a lockable cover and multiple receptacles with overload protection for safe, simple operation.
Designed to meet the needs of your operation, the QC PTO generators are built for 24 Hr. 7 day a week dependability. The heavy-duty genset features a cast-iron body with four oversized copper windings for more efficient power generation. Integrated cooling fans allow for venting at the front and back of the genset.
Designed exclusively for Baumalight QC PTO generators, the DisplayMaster1 is your guide for quick, easy setup and an "at a glance" monitor of key performance factors. The intuitive three light system gives instant feedback whether over or under speed. The DisplayMaster1 screen also shows the generator’s voltage, frequency and amperage; KW, KVA and Power Factor; runtime and KW hours; and peak/average KVA.
With Baumalight’s Reset Circuit Breakers, you can protect your PTO generator against short-circuit damage without the worry of blown fuses. When your PTO generator experiences a power surge, simply reset the breaker and restart the generator.
For improved and reliable performance, the brushless design on your QC PTO tractor-driven generator provides efficient operation with the same power output as conventional brushes, but which are lighter, less noisy and require less maintenance over time without the added risk of sparks
Baumalight QC PTO generators run on four oversized copper windings, reducing the RPM of the unit and increasing the quality and stability of the power – giving you nearly three times the momentary surge capacity over their rated power, with the exception of the QC12 and QC19 models.
The durable QC gear box turns the tractor’s PTO RPM into 1,800 RPM internally. This lower operating speed increases duty cycle and operating life and means less friction, heat, and wear over a longer period of time, ensuring a longer life for your generator.
Getting the power up and running is a simple task with the intuitive three light system. The bright LEDs give instant feedback whether over or under speed. Once the optimal PTO speed is reached, the green light is lit and you are ready to go.
Our automatic voltage regulation keeps power stable within 1% plus or minus from 64 down to 56 Hz, allowing for near constant voltage in the case of an unexpected load variation. This protects your generator from harm and provides a superior quality of power regardless of your property’s varying power requirements.
The QC PTO tractor generator offers high momentary surge capacity up to three times over their rated power. If there is a sudden change of load, the AVR will automatically stabilize the voltage to a near constant level, eliminating problems created by under-voltage or over-voltage fluctuations, as well as offering protection against minor and major spikes and surges.
The QC PTO Generator connection panel features full load connectors and multiple receptacles with overload protection for safe and simple operation. The full load connector also features a lockable cover for additional safety measures.
The QC PTO generators feature 2 x 20 amp duplex receptacle for additional versatility on your property when you need to run multiple pieces of equipment during a power outage.
Some QC generator models come with a 50 amp welder receptacle, allowing you to transport your portable QC PTO generator and plug it into a welder for remote repairs on your farm equipment.
The drip-proof design features ventilation on the sides of the PTO generator, allowing air to circulate through the generator but prevents drops of liquid from falling inside.
The trailer tongue enables quick, easy connections, allowing one person to move the generator from place to place by hand. It comes in the standard 5/8” hitch pin size.
All Baumalight QC generators come with a Limited 2 year/2,000 hour warranty.
At Baumalight, we make it easy to get help for large repairs on your generator by offering an expansive network of motor repair centres. You can visit the Support page on our website to locate a service centre near you.
When your PTO generator requires smaller repairs, such as replacing the gearbox, tires, PTO shaft, AVR, digital display or receptacles, you can visit your local farm repair dealership to find the Baumalight part you need.
Included with your purchase is a 10-foot, high-quality full power cable for simple connection of the PTO generator into your system. We also offer custom cuts in any length of generator cable.
Every one of our QC PTO generators is tested and crated before heading to your property or home. For additional safety measures, all QC generators are shipped with the neutral bonded to the ground inside the alternator.
The durable gear box turns the tractor’s PTO RPM into 1,800 RPM internally. This lower operating speed increases duty cycle and operating life and means less friction, heat and wear over a longer period of time. The oil-filled gearbox is also easily serviced and helps provide consistent speed and quality power.
You can make your QC PTO generator stationary by mounting it on a concrete pad; however, you should never mount a generator directly onto concrete, rock, metal or soil. We have rubber mount kits available to help the tires absorb the shock from the vibrations and high frequencies created by the generator.
To help ensure accurate and proper mounting of your generator on a concrete pad, please refer to the Mounting Dimensions manual for QC generators. These measurements are available for each model of QC generator.
The trailer is powder-coated for additional durability, reducing corrosion from scratches, chipping and abrasion.
For additional safety measures, the fully-shielded PTO shaft is equipped with guards to prevent entanglement.
Pneumatic trailer tires make it easy to move the generator around – inside by hand and even from property to property. They also provide shock absorption and cushioning for the generator while it is operating. Bearings on the wheels allow long service life and the ability to move the trailer from farm to farm if necessary.
For an added cost we also offer a three point hitch deck option instead of a trailer, contact your dealer for details.
D001378 – deck for TX18-31, QC12-30 & KR30
There are currently no customer photos or video submitted for this Baumalight product. Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.
|Model No.||Connection||KW||Momentary Surge KW||50% Load||100% Load||RPM||Welder Receipt Voltage (50 amp)||Volts||Number of Poles||Internal RPM||Full Output Amps (Main Breaker)||Phase||Shipping Weight(lbs)|
|QC 30-2||Parallel Low WYE||30||85||20HP||49HP||540||208||120/208||4||1,800||100||3||779|
|QC 45-2||Parallel Low WYE||45||120||31HP||75HP||540||208||120/208||4||1,800||150||3||980|
|QC 68-2||Parallel Low WYE||68||190||50HP||105HP||540||208||120/208||4||1,800||250||3||1159|
|QC 105-2||Parallel Low WYE||105||315||72HP||155HP||1000||208||120/208||4||1,800||400||3||1474|
|QC 30-3||Series High Delta||30||85||20HP||49HP||540||240||120/240||4||1,800||90||3||779|
|QC 45-3||Series High Delta||45||120||31HP||75HP||540||240||120/240||4||1,800||150||3||980|
|QC 68-3||Series High Delta||68||190||50HP||105HP||540||240||120/240||4||1,800||225||3||1159|
|QC 105-3||Series High Delta||105||315||72HP||155HP||1000||240||120/240||4||1,800||320||3||1474|
|QC 30-4||Series High WYE||33||85||20HP||49HP||540||n/a||277/480||4||1,800||50||3||779|
|QC 45-4||Series High WYE||50||120||31HP||75HP||540||n/a||277/480||4||1,800||70||3||980|
|QC 68-4||Series High WYE||76||190||50HP||105HP||540||n/a||277/480||4||1,800||125||3||1159|
|QC 105-4||Series High WYE||113||315||72HP||155HP||1000||n/a||277/480||4||1,800||150||3||1474|
|Model Number||Discount Available||Number of Business Days
to build first order
|Number of Business Days
to build next order
|TX12||Stock in Regina|
|KR30||8Week8% orders will be better than QC|
|KR44||8Week8% orders will be better than QC|
|KR52||8Week8% orders will be better than QC|
|KR65||8Week8% orders will be better than QC|
|All QC Models||Video Shoot Discount|
|QC12||Expect 10 week lead time on 8week8% orders|
|QC19||Expect 10 week lead time on 8week8% orders.|
|QC30||Expect 10 week lead time on 8week8% orders.|
|QC45||Expect 10 week lead time on 8week8% orders.|
|QC55||Expect 10 week lead time on 8week8% orders|
|QC65||Expect 10 week lead time on 8week8% orders|
|QC80||Expect 10 week lead time on 8week8% orders|
|QC100||Expect 10 week lead time on 8week8% orders|
|QC30-2 QC30-3 QC30-4||Add 4 days for -4. Same frame used for all 3. Expect 10 week lead time on 8week8% orders|
|QC45-2 QC45-3 QC45-4||Add 4 days for -4. Same frame used for all 3. Expect 10 week lead time on 8week8% orders|
|QC 68-2 QC68-3 QC68-4||Same frame used for all 3. Expect 10 week lead time on 8week8% orders|
|QC105-2 QC105-3 QC105-4||Same frame used for all 3. Expect 10 week lead time on 8week8% orders|
|QC27-6||Expect 10 week lead time on 8week8% orders|
|QC50-6||Stock unit will need to be mounted on trailer yet. Expect 10 week lead time on 8week8% orders|
|QC75-6||Expect 10 week lead time on 8week8% orders|
|QC100-6||Expect 10 week lead time on 8week8% orders|