Baumalight 1P34

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

An exception is that we sell directly to Equipment Rental Stores of most sizes. Click here for more info.

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

Locally Available Parts

At Baumalight, we design many of our products using industry - standard parts that are widely available from local supply stores, whether you're in the countryside or the city. Many replacement parts such as bearings, belts, seals, touch - up paint - even cutting teeth - can often be found through local suppliers, not just from us. Click here to Learn More

D005735 Extension Kit

• Price ( USD ): $

  •   CANADA
  •   UNITED STATES
  •   INTERNATIONAL

10% discount if shipped with a 1P24

If the tractor you are using with the 1P24 measures less than 20 inches from the PTO lock groove to the center of the lower link arm pin holes, you will require the D005735 Extension Kit. CLICK HERE to learn more.

Quick Hitch Compatible

The 1P34 Stump Grinder is CAT 1 Quick Hitch compatible, allowing you to easily connect to your compact tractor.

Slip Clutch PTO Shaft

The 1P34 Stump Grinder includes a slip clutch PTO shaft. In the event that the grinder hits a rock, the slip clutch is designed to slip so that the shaft is not damaged. (this started in mid 2020).

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

6 FREE TEETH

All 1P34 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Rotor

The massive ⅝" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.