Skid Steer Stump Grinders|S16

KEY FEATURES

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

An exception is that we sell directly to Equipment Rental Stores of most sizes. Click here for more info.

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

AUX Plug

The S16 comes with an AUX cable that will plug right into the 14 pin AUX plug on your mini skidsteer if it’s equipped with one.
This will allow you to control the grinder from your built-in controls on the mini skidsteer.

D006990 OPTIONAL HAND CONTROL

If your mini skidsteer is not equipped with an AUX plug, don’t worry. We offer an optional
hand control adapter. Connect the hand control to the attachment AUX cable,
connect it to 12V, and now you can still control the stump grinder from the operator platform.

Price ( USD ): $

HOSE SHIELD

Double shielded hoses for extra protection.

12-volt electric actuator powered swing

The S16 as an electric actuator which really boosts productivity because all of the hydraulic flow and pressure can go directly to the motor. The power to swing the head is drawn from the 12V battery in your skidsteer which can recharge while repositioning.

BENT AXIS PISTON MOTOR

Our industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your stump grinding needs.

6 FREE TEETH

All S16 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in the owner’s manual tub bolted to the frame.

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Grinders teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Rotor

The massive ½" thick steel rotor provides the back bone for the Stump Grinder cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Grinder with the extra momentum needed when the grinding is tough, making sure the Stump Grinder can power through the hardest stumps.

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

HARDENED STEEL BUSHING

Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

Customer submitted media

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.

CUSTOMER PHOTOS

Baumalight S16 mini skidsteer stump grinder

S16 with double shielded hoses protection

SPECIFICATIONS – COMPARISON CHART

Model No.	S14	S16	S18	S24	S28	S40
Recommended HP Size	Mini Skidsteer	Mini Skidsteer	25-80	30-80	50-120	50-120
Maximum Carrier Size	Check GPM & PSI	Check GPM & PSI	Check GPM & PSI	Check GPM & PSI	Check GPM & PSI	Check GPM & PSI
Motor Type	Gerotor	Bent Axis Piston	Gerotor	Gerotor	Gerotor	Bent Axis Piston
Hydraulic GPM	Check Stump Cutting Size Chart	Check Stump Cutting Size Chart	Check Stump Cutting Size Chart	Check Stump Cutting Size Chart	Check Stump Cutting Size Chart	Check Stump Cutting Size Chart
Rotor Size	18"	18"	24"	24"	24"	24"
Number of Teeth	12	24	34	34	34	20
Tooth Part number	H3000	H3000	S1000	S1000	S1000	H3000
Tooth Construction	High speed	High speed	Planer	Planer	Planer	High speed
Cutting Wheel Speed	Depends on GPM	Depends on GPM	Depends on GPM	Depends on GPM	Depends on GPM	Depends on GPM
Cutting Height - Above Ground	No limit	No limit	No limit	No limit	No limit	No limit
Cutting Depth - Below Ground	6"	6"	10"	10"	10"	24"
Maximum Cutting Depth - Per Pass	2"	2"	5"	6"	6"	1"
Maximum Horizontal Cut	12"	12"	22"	22"	22"	22"
Swing Arc	Self-feeding	56°	Self-feeding	60°	63°	85°
Hub Torque	150 Ft.-Lbs.	-	250 Ft.-Lbs.	250 Ft.-Lbs.	803 Ft.-Lbs.	-
Over Torque Protection	Relieve valve	Relieve valve	Relieve valve	Relieve valve	Relieve valve	Remote
Hitch	1" pivot pins	1" pivot pins	Mini Plate	Quick Attach	Quick Attach	Quick Attach
No. of Remotes Required - Hydraulic	1	1	1	1	1	1
Requires 12 Volt DC	No	Yes	No	Yes	Yes	Yes
Unit Weight (Shipping) Lbs.	394	400	642	995	995	1,200

PRODUCT PRICING

Motor Options - Stump Cutting Time Chart

SKIDSTEER STUMP CUTTING TIMES BASED ON 24" STUMP

Motor	Case Drain	PSI	12 GPM	15 GPM	20 GPM	25 GPM	30 GPM	35 GPM	40 GPM	50 GPM	CC	Motor Type	RPM at MAX GPM
S508 Motor Available for : S16	Critcal	2500	40 min	30 min	20 min	--	--	--	--	--	25	Piston	2700
S508 Motor Available for : S16	Critcal	3,000	30 min	25 min	15 min	--	--	--	--	--	25	Piston	2700
S445 Motor Available for : S24	Recommended	2500	--	60 min	40 min	35 min	--	--	--	--	125	Roller Vane	520
		3,000	--	50 min	30 min	30 min	--	--	--	--
		3,500*	--	50 min	30 min	30 min	--	--	--	--
S545 Motor Available for : S24	Recommended	2500	--	80 min	40 min	35 min	25 min	20 min	--	--	130	Roller Vane	700
		3,000	--	70 min	30 min	30 min	20 min	16 min	--	--
		3,500*	--	60 min	30 min	30 min	20 min	16 min	--	--
S645 Motor Available for : S28	Recommended	3,000	--	40 min	40 min	25 min	15 min	12 min	10 min		130	Roller Vane	540
S645 Motor Available for : S28	Recommended	3,500	--	--	30 min	20 min	12 min	10 min	8 min		130	Roller Vane	540
S740 Motor Available for : S40	Critcal	2500	--	--	30 min	15 min	12 min	10 min	--	--	56	Piston	2100
		3,000	--	--	25 min	12 min	10 min	8 min	--	--
		3,500*	--	--	23 min	10 min	8 min	6 min	--	--
S770 Motor Available for : S40	Critcal	2500	--	--	--	30 min	20 min	9 min	8 min	7 min	84	Piston	2000
		3,000	--	--	--	25 min	15 min	7 min	6.5 min	6 min
		3,500*	--	--	--	23 min	10 min	5 min	4.5 min	4 min

* Motor will run at this PSI, but excess pressure is dumping over relief.
5 GPM is used for swing cylinder.

HOW TO CHOOSE THE RIGHT MOTOR

The most important part of choosing the right BrushFire is matching the correct motor option to your equipment. It can make a huge difference. In this video, we explain how to use our charts to determine which motor is right for you!