PUT SOME
TEETH
INTO IT
PUT SOME
TEETH
INTO IT
The 700 series Baumalight brush mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The 700 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth, their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 700 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. It’s flat profile however makes it vulnerable to shattering on impact with rocks and other debris. See our brush cutting size chart to see how much this excavator mounted forestry mulcher process according to your hydraulic flow. With the build in control and precision of the excavator, mulching around objects is not a problem, whether it’s in a ditch or overhead.
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.
The 700 Series tooth utilizes the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.
Heavy-duty teeth holders resist bending and keep you working longer.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.
The 700 Series tooth utilizes the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.
Heavy-duty teeth holders resist bending and keep you working longer.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.
| Model No. | MX230 | MX330 | MX530 | MX530R | MX548 | MX548R | iSeries MX748 | iSeries MX748R | iSeries MX760 | iSeries MX960 |
| Path Width | 38" | 38" | 40" | 40" | 62" | 62" | 65" | 70" | 82" | 76" |
| Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 48" | 48" | 60" | 60" |
| Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 20 | 25 | 30 | 33 | 40 |
| Minimum Carrier Ton | 2 | 3 | 4 | 4 | 8 | 8 | 18 | 20 | 22 | 22 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level | Level |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit |
| Number of Cutters | 22 | 36 | 64 | 64 | 104 | 104 | 62 | 62 | 78 | 78 |
| Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2.5" | 2.5" | 2.5" | 2.5" |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 15" | 17.25" | 17.25" | 17.25" | 17.25" |
| Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 408 lbs | 670 lbs | 670 lbs | 800 lbs | 800 lbs |
| No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 |
| System Protection | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef |
| Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 2167 lbs | 2167 lbs | 3180 lbs | 3300 lbs | 3600 lbs |
| Model No. | MX230 | MX330 | MX530 | MX530R | MX548 | MX548R | iSeries MX748 | iSeries MX748R | iSeries MX760 | iSeries MX960 |
| Path Width | 38" | 38" | 40" | 40" | 62" | 62" | 65" | 70" | 82" | 76" |
| Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 48" | 48" | 60" | 60" |
| Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 20 | 25 | 30 | 33 | 40 |
| Minimum Carrier Ton | 2 | 3 | 4 | 4 | 8 | 8 | 18 | 20 | 22 | 22 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level | Level |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit |
| Number of Cutters | 22 | 36 | 64 | 64 | 104 | 104 | 62 | 62 | 78 | 78 |
| Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2.5" | 2.5" | 2.5" | 2.5" |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 15" | 17.25" | 17.25" | 17.25" | 17.25" |
| Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 408 lbs | 670 lbs | 670 lbs | 800 lbs | 800 lbs |
| No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 |
| System Protection | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef |
| Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 2167 lbs | 2167 lbs | 3180 lbs | 3300 lbs | 3600 lbs |
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||||
| C730 Bent Axis Piston |
3000 3500 4000 |
Critical | 3.5" 4" 5" |
4.5" 5" 5.5" |
5.5" 6" 6.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||||
| C740 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.25" 4.75" 5.25" |
6" 6.25" 6.5" |
6.5" 7" 7.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||||
| C750 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
5.5" 6" 6.25" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||||
| C770 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6.5" 7" 7.5" |
6" 6.5" 7" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | |||||||
| C790 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5.5" 6" 6.5" |
8" 8.5" 9.5" |
9.5" 10" 10.5" |
10" 10.5" 11.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||
| C930 Bent Axis Piston |
3000 3500 4000 |
Critical | 4" 4.5" 5.5" |
5" 5.5" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||
| C940 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.75" 5.25" 5.75" |
6.5" 6.75" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||
| C950 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
6" 6.5" 6.75" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||
| C970 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6" 7.5" 8" |
6.5" 7" 7.5" |
8" 8.5" 9" |
8.5" 9" 9.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.
GEAR MOTORS
ROLLER-VANE GEROTOR MOTORS
BENT AXIS PISTON MOTORS
| Date | Description |
|---|
| Model Number | Discount Available | Number of Business Days to build first order |
Number of Business Days to build next order |
Location | Notes | Discount Description |
|---|---|---|---|---|---|---|
| FMM148 | 35 | 35 | MTB | Out of stock on 46cc gear motors till late August. 1 pro-type in stock | ||
| FMS260 | 17 | 17 | Out of stock on 46cc gear motors till late August. | |||
| FMS280 | 17 | 17 | MTB | Out of stock on 46cc gear motors till late August. | ||
| MP248 | 95 | 95 | NEED TO DESIGN | |||
| FMP260 | 15 | 15 | MTB | Pre-Production | ||
| MP348 | 15 | 15 | ||||
| MP360 | 11 | 15 | ||||
| MP548 | 15 | 15 | ||||
| MP560 | 12 | 12 | ||||
| MP572 | 16 | 16 | ||||
| iMP772 | 15% | 3 | 19 | Floor Model | ||
| MS248 | 30 | 30 | ||||
| MS348 | 11 | 15 | ||||
| MS548 | 11 | 11 | ||||
| MS560 | 11 | 11 | ||||
| MS572 | 15 | 15 | ||||
| iMS760 | 11 | 15 | ||||
| iMS772 | 15 | 15 | MTB | |||
| MS960 | 25 | 25 | ||||
| MS972 | 25 | 25 | ||||
| MX230 | 11 | 17 | ||||
| MX330 | 11 | 15 | MTB | |||
| MX330G | 40 | 40 | Out of stock on 46cc gear motors till late August. Gear Motor Model 20% more efficient | |||
| MX530 | 11 | 11 | ||||
| MX530R | 23 | 23 | ||||
| MX548 | 11 | 11 | MTB | |||
| MX548R | 20 | 20 | ||||
| iMX748 | 11 | 15 | ||||
| iMX748R | 20 | 20 | ||||
| MX760R | 20 | 20 | Same frame will work for 900 & 1100 series | |||
| MX960R | 25 | 25 |
| Date | Description |
|---|---|
| 2020-09-07 | Labour Day |
| 2020-10-12 | Thanksgiving |
| 2020-12-25 | Christmas Day |
| 2020-12-26 | Boxing Day |
