PUT SOME
TEETH
INTO IT
This is a 72” rotor width and 87” path width mulcher and like the rest of our 500 series fixed tooth brush mulchers, it is designed to maintain and clear fence lines on farms and entry level contractor work.The 500 series Baumalight brush mulchers will efficiently mulch heavy brush and small trees and are offered with two different types of teeth. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. The 500 & 700 series skidsteer mulchers come with pressure gauges which is very handy to watch and see how close you are to maximum pressure; once you start blowing over relief the mulcher becomes very unproductive. See our brush cutting size chart to see what limb size this excavator mounted forestry mulcher can handle.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
The integrated brush bar helps control the brush and bend taller brush for easier mulching.
These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.
These heavy-duty tooth holders resist bending and keep you working longer.
The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
Large PSI pressure gauge for maintaining the optimal flow that gives you a clear indication of the most efficient brush mulching performance.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
The integrated brush bar helps control the brush and bend taller brush for easier mulching.
These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.
These heavy-duty tooth holders resist bending and keep you working longer.
The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
Large PSI pressure gauge for maintaining the optimal flow that gives you a clear indication of the most efficient brush mulching performance.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
MS248 | MS348 | MS548 | MS560 | MS572 | iSeries MS760 | MS960 | MS972 | MS1160 | |
---|---|---|---|---|---|---|---|---|---|
Path Width | 60" | 60" | 62" | 75" | 87" | 75" | 75" | 84" | 75" |
Rotor Width | 48" | 48" | 48" | 60" | 72" | 60" | 60" | 72" | 60" |
Minimum carrier weight | 2,000 | 3,000 | 4,000 | 5,500 | 6,000 | 8,000 | 7,000 | 7,500 | 7,000 |
Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
Tool Style | Flail | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Double Tipped | Double Tipped | Sharpenable Planer |
Number of cutters | 30 | 60 | 104 | 126 | 160 | 78 | 38 | 43 | 31 |
Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 17.25" | 18.5" | 18.5" | 19.3" |
Rotor Weight (with tools) | 125 lbs | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 800 lbs | 860 lbs | 1,105 lbs | 860 lbs |
System Protection | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief |
Hydraulic Couplers | Included | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included | Not Included |
Unit Shipping Weight | 750 lbs | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2600 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
MS248 | MS348 | MS548 | MS560 | MS572 | iSeries MS760 | MS960 | MS972 | MS1160 | |
---|---|---|---|---|---|---|---|---|---|
Path Width | 60" | 60" | 62" | 75" | 87" | 75" | 75" | 84" | 75" |
Rotor Width | 48" | 48" | 48" | 60" | 72" | 60" | 60" | 72" | 60" |
Minimum carrier weight | 2,000 | 3,000 | 4,000 | 5,500 | 6,000 | 8,000 | 7,000 | 7,500 | 7,000 |
Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
Tool Style | Flail | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Double Tipped | Double Tipped | Sharpenable Planer |
Number of cutters | 30 | 60 | 104 | 126 | 160 | 78 | 38 | 43 | 31 |
Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 17.25" | 18.5" | 18.5" | 19.3" |
Rotor Weight (with tools) | 125 lbs | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 800 lbs | 860 lbs | 1,105 lbs | 860 lbs |
System Protection | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief |
Hydraulic Couplers | Included | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included | Not Included |
Unit Shipping Weight | 750 lbs | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2600 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 555 | 832 | 1060 | 1390 | ||||||||||
A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1" 1.25" 1.25" |
1.5" 2" 2" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
-- -- -- |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1.25" 1.75" 1.75" |
2.5" 3" 3" |
3" 3.5" 3.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1090 | 1640 | 2050 | |||||||||||
C508 Bent Axis Piston | 3000 3500 4000 |
Critical | 1.5" 2" 2.5" |
2.25" 2.75" 3.25" |
2.75" 3.25" 4" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
C510 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
2" 2.5" 3" |
2.5" 3" 3.5" |
3" 3.5" 4.5" |
3.5" 4.5" 5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1450 | 1800 | 2100 | |||||||||||
C530 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
3" 3.5" 4.5" |
4" 4.5" 5" |
5" 5.5" 5.75" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1500 | 1800 | 2100 | |||||||||||
C540 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
3.75" 4.25" 4.75" |
5.5" 5.75" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1600 | 1875 | 2140 | |||||||||||
C550 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5" 5.5" 5.75" |
6.5" 7" 7.5" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
C570 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
6" 6.5" 7" |
5.5" 6" 6.5" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
C590 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5" 5.5" 6" |
7.5" 8" 9" |
9" 9.5" 10" |
9.5" 10" 11" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C730 Bent Axis Piston |
3000 3500 4000 |
Critical | 3.5" 4" 5" |
4.5" 5" 5.5" |
5.5" 6" 6.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1500 | 1800 | 2100 | ||||||||
C740 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.25" 4.75" 5.25" |
6" 6.25" 6.5" |
6.5" 7" 7.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1600 | 1875 | 2140 | ||||||||
C750 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
5.5" 6" 6.25" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C770 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6.5" 7" 7.5" |
6" 6.5" 7" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C790 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5.5" 6" 6.5" |
8" 8.5" 9.5" |
9.5" 10" 10.5" |
10" 10.5" 11.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||
C930 Bent Axis Piston |
3000 3500 4000 |
Critical | 4" 4.5" 5.5" |
5" 5.5" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1500 | 1800 | 2100 | ||||||
C940 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.75" 5.25" 5.75" |
6.5" 6.75" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1600 | 1875 | 2140 | ||||||
C950 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
6" 6.5" 6.75" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
RPM | 1400 | 1630 | 1830 | 2030 | |||||
C970 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6" 7.5" 8" |
6.5" 7" 7.5" |
8" 8.5" 9" |
8.5" 9" 9.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C1130 Bent Axis Piston |
3000 3500 4000 |
Critical | 5" 5.5" 6.5" |
6" 6.5" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1500 | 1800 | 2100 | ||||||||
C1140 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
6.75" 7.25" 7.75" |
8.5" 8.75" 9" |
9" 9.5" 10" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1600 | 1875 | 2140 | ||||||||
C1150 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
9" 9.5" 9.75" |
10.5" 11" 11.5" |
11" 11.5" 12" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C1170 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
10" 11.5" 12" |
10.5" 11" 11.5" |
12" 12.5" 13" |
12.5" 13" 13.5" |
-- -- -- |
-- -- -- |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C1190 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
10.5" 11" 11.5" |
13" 13.5" 14.5" |
14.5" 15" 15.5" |
15" 15.5" 16.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.
GEAR MOTORS
ROLLER-VANE GEROTOR MOTORS
BENT AXIS PISTON MOTORS
Date | Description |
---|
Model Number | Discount Available | Number of Business Days to build first order |
Number of Business Days to build next order |
Location | Notes | Discount Description |
---|---|---|---|---|---|---|
FMM148 | 36 | 56 | MTB | 1 rental unit in stock | ||
FMS260 | 53 | 53 | Extended lead time on 46cc gear motor option. | |||
FMS280 | 53 | 53 | MTB | Extended lead time on 46cc gear motor option. | ||
MP248 | 256 | 256 | NEED TO DESIGN | |||
FMP260 | 35% + more for media | 51 | 51 | MTB | Pre-Production | List Price of $3,500.00 - Pre-Production |
MP348 | Stock | 19 | ||||
MP360 | Stock | 19 | ||||
MP548 | 19 | 19 | ||||
MP560 | 14 | 14 | ||||
MP572 | 47 | 52 | ||||
iMP772 | 66 | 66 | ||||
MP972 | 201 | 201 | ||||
MS248 | 451 | 451 | Not Taking New Orders at this Time | |||
MS348 | Stock | 19 | ||||
MS548 | 46 | 46 | ||||
MS560 | 46 | 46 | ||||
MS572 | 51 | 51 | ||||
iMS760 | 6 | 61 | ||||
MS960 | 46 | 51 | ||||
MS972 | 66 | 71 | ||||
MS1160 | 46 | 51 | ||||
MX230 | 21 | 21 | ||||
MX330 | Stock | 19 | MTB | Stock unit w/blank weld-on plate | ||
MX330G | 76 | 76 | Gear Motor Model 20% more efficient | |||
MX530 | 46 | 46 | ||||
MX530R | 59 | 59 | ||||
MX548 | 10% | Stock | 46 | MI | Stock Unit is Discounted Unit Located In MI - Free Freight to Dealer | Demo/Floor Model - BL1002246 |
MX548R | 56 | 56 | ||||
iMX748 | 5% | 16 | 31 | Overstock Discount on New Unit Orders | Rotor over stock discount (completely new unit) | |
iMX748R | 5% | 51 | 51 | Overstock Discount on New Unit Orders | Rotor over stock discount (completely new unit) | |
MX960R | 53 | 53 | ||||
MX1160R | 51 | 51 |
Date | Description |
---|---|
2021-04-02 | Canadian public holiday - Do not count this as a production day |