Overcome the challenge of dense brush and take down small trees efficiently with a skidsteer mounted hydraulically-driven tree saw. The DSA530 model, a multi angle tree saw for skidsteers is power angled by a helical actuator, rotating the cutting head 180 degrees for quick and precise cutting, trimming and limbing.
Featuring a high-speed circular blade with replaceable carbide teeth for improved durability, and advanced hydraulics for longer motor life, this tree saw attachment is an ideal tool for your rural property.
For simple in cab control, the DSA530 is available with Baumalight's Auxiliary Electrical Connection.
This connection gives you simple quick connections and access to all the attachments functions using your machine's own controls.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
Is one of your skidsteers older, without an auxiliary electrical connection? We also have an in-cab adapter to plug into your Aux Electrical Connected attachments that will allow you to run them. Plug the adapter into the attachment, connect it to 12V and now you can run your new attachment on an older skidsteer.
The tree saw’s durable design and quality materials combine to create a saw that is able to stand up to the demanding work of cutting limbs and trees.
Available with 180º rotating cutting the head, powered by a rotating helical actuator offers precise control for quick, clean trimming and limbing.
Thanks to the DSA530's rotating heliacal actuator, the head doesn’t rotate on a pin and doesn’t need greasing.
The tree saw makes clean work of limbing and trimming trees safely and quickly, leaving pruned trees with a clean cut.
DropSaw's skidsteer plate is on a roll back angle. This gives you even more flexibility to successfully trim areas that are difficult to reach.
The durable shield encloses the blade for protection, directing the chips as it easily cuts through limbs and trees.
The tree saw's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.
To prevent pressure relief activation on the motor seal, the DXA530 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. To learn more CLICK HERE about the case drain line.
A solid serrated steel plate up front helps guide limbs, branches and small trees safely away from the operator.
The large push bar with integrated safety mesh is angled to help guide any falling debris away from the operator.
The tree saw’s heavy duty circular blade is designed and shaped from AR-400 steel. This abrasion resistant steel is rugged and ready for the abuse of a long service life.
The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.
The high speed teeth design allows for easy rotation and changing of the teeth as needed.
All DSA530 Tree Saw come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.
For simple in cab control, the DSA530 is available with Baumalight's Auxiliary Electrical Connection. This connection gives you simple quick connections and access to all the attachments functions using your machine's own controls.
Making sure you have the best seat in the house, the tree saw was designed with maximum visibility in mind, allowing you to make cleaner and better cuts.
Heavy duty construction and a durable powder coated finish.
Built for the long haul, the tree saw has multiple removable panels for easier access and servicing.
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
All of the hydraulic hoses on the DropSaw are sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armour for double protection. The hoses are then routed internally, keeping them out of harm’s way. The DropSaw also features a pivoting arm with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
Skidsteer tree saw models ship with the necessary hydraulic hoses, so you can connect and go to work.
All of the hydraulic hoses are routed internally where possible and sleeved for operator and hose protection, while the connecting hoses are sleeved and wrapped in hose armor for double protection.
Skidsteer Dropsaws feature travelling hose supports that relieves pressure and strain on hoses. A greaseable pin on the hose support ensures longer life and better performance.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
Is one of your skidsteers older, without an auxiliary electrical connection? We also have an in-cab adapter to plug into your Aux Electrical Connected attachments that will allow you to run them. Plug the adapter into the attachment, connect it to 12V and now you can run your new attachment on an older skidsteer.
The tree saw’s durable design and quality materials combine to create a saw that is able to stand up to the demanding work of cutting limbs and trees.
Available with 180º rotating cutting the head, powered by a rotating helical actuator offers precise control for quick, clean trimming and limbing.
Thanks to the DSA530's rotating heliacal actuator, the head doesn’t rotate on a pin and doesn’t need greasing.
The tree saw makes clean work of limbing and trimming trees safely and quickly, leaving pruned trees with a clean cut.
DropSaw's skidsteer plate is on a roll back angle. This gives you even more flexibility to successfully trim areas that are difficult to reach.
The durable shield encloses the blade for protection, directing the chips as it easily cuts through limbs and trees.
The tree saw's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.
To prevent pressure relief activation on the motor seal, the DXA530 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. To learn more CLICK HERE about the case drain line.
A solid serrated steel plate up front helps guide limbs, branches and small trees safely away from the operator.
The large push bar with integrated safety mesh is angled to help guide any falling debris away from the operator.
The tree saw’s heavy duty circular blade is designed and shaped from AR-400 steel. This abrasion resistant steel is rugged and ready for the abuse of a long service life.
The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.
The high speed teeth design allows for easy rotation and changing of the teeth as needed.
All DSA530 Tree Saw come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.
For simple in cab control, the DSA530 is available with Baumalight's Auxiliary Electrical Connection. This connection gives you simple quick connections and access to all the attachments functions using your machine's own controls.
Making sure you have the best seat in the house, the tree saw was designed with maximum visibility in mind, allowing you to make cleaner and better cuts.
Heavy duty construction and a durable powder coated finish.
Built for the long haul, the tree saw has multiple removable panels for easier access and servicing.
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
All of the hydraulic hoses on the DropSaw are sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armour for double protection. The hoses are then routed internally, keeping them out of harm’s way. The DropSaw also features a pivoting arm with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
Skidsteer tree saw models ship with the necessary hydraulic hoses, so you can connect and go to work.
All of the hydraulic hoses are routed internally where possible and sleeved for operator and hose protection, while the connecting hoses are sleeved and wrapped in hose armor for double protection.
Skidsteer Dropsaws feature travelling hose supports that relieves pressure and strain on hoses. A greaseable pin on the hose support ensures longer life and better performance.
There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.
| Model # | DSM230 | DSM530 | DSA530 |
|---|---|---|---|
| ADAPTOR | MINI SKIDSTEER | UNIVERSAL SKIDSTEER | UNIVERSAL SKIDSTEER |
| Blade Angle | 180° | 180° | 180° |
| Rotation | Bolt-on | Bolt-on | Actuator |
| Actuator | Manual | Manual | Helical |
| GPM | 6-20 | 10-40 | 10-45 |
| PSI | 4,000 | 4,000 | 4,000 |
| Electrical AUX | Not required | Not required | 2 ON/OFF pins & G |
| Requires Case Drain | Yes | Yes | Yes |
| Hydraulic Hose | Supplied | Supplied | Supplied |
| Hydraulic Couplers | Supplied | Not Supplied | Not Supplied |
| Motor Type | Bend Axis Piston | Bend Axis Piston | Bend Axis Piston |
| Motor Cc | 25 | 47 | 47 |
| Motor Option | T508 | T530 | T530 |
| Blade Diameter | 30" | 30" | 30" |
| Max Cut | 10" | 10" | 10" |
| Blade Material | AR400 | AR400 | AR400 |
| Cut Thickness | 3/4" | 3/4" | 3/4" |
| Tooth part number | H3000 | H3000 | H3000 |
| Type of Teeth | High Speed Teeth | High Speed Teeth | High Speed Teeth |
| No. of Edges per Tooth | 3 | 3 | 3 |
| Number of Teeth | 12 | 12 | 12 |
| Weight | 650 lbs | 800 lbs | 900 lbs |
| Model # | DSM230 | DSM530 | DSA530 |
|---|---|---|---|
| ADAPTOR | MINI SKIDSTEER | UNIVERSAL SKIDSTEER | UNIVERSAL SKIDSTEER |
| Blade Angle | 180° | 180° | 180° |
| Rotation | Bolt-on | Bolt-on | Actuator |
| Actuator | Manual | Manual | Helical |
| GPM | 6-20 | 10-40 | 10-45 |
| PSI | 4,000 | 4,000 | 4,000 |
| Electrical AUX | Not required | Not required | 2 ON/OFF pins & G |
| Requires Case Drain | Yes | Yes | Yes |
| Hydraulic Hose | Supplied | Supplied | Supplied |
| Hydraulic Couplers | Supplied | Not Supplied | Not Supplied |
| Motor Type | Bend Axis Piston | Bend Axis Piston | Bend Axis Piston |
| Motor Cc | 25 | 47 | 47 |
| Motor Option | T508 | T530 | T530 |
| Blade Diameter | 30" | 30" | 30" |
| Max Cut | 10" | 10" | 10" |
| Blade Material | AR400 | AR400 | AR400 |
| Cut Thickness | 3/4" | 3/4" | 3/4" |
| Tooth part number | H3000 | H3000 | H3000 |
| Type of Teeth | High Speed Teeth | High Speed Teeth | High Speed Teeth |
| No. of Edges per Tooth | 3 | 3 | 3 |
| Number of Teeth | 12 | 12 | 12 |
| Weight | 650 lbs | 800 lbs | 900 lbs |
|
| Date | Description |
|---|
| Date | Description |
|---|---|
| 2024-05-20 | Victoria Day |
CANADA
UNITED STATES
INTERNATIONAL
