s14 s18 s24 s28 s40

Skidsteer Stump Grinder - S18

The S18 skid steer stump grinder is designed ruggedly with simple operation in mind, with no required electrical connection. The simple direct flow hydraulic drive is designed to provide the best torque and RPM to the cutting head as no flow is diverted to a swing cylinder. The S18 Baumalight stump grinder is offered with three motor options to best match your flow, be sure to check out the Stump Cutting Times charts below to see how fast you can grind stumps with the flow of your skidsteer. The unique positioning of the rotor allows the operator an excellent view of the grinding action and the heavy duty fixed deflector safely directs the flow of debris.
By a quick pull of two pins a mini skidsteer plate can be put on as well.

6 Free Teeth Promo Hyd Flow and Pressure

Excavator Mount

This standard mounting plate is perfect for welding to your skid steer’s unique fitting.

Excavator Mount

Carbide Tipped

Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.

Carbide Tipped

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Multiple Teeth

Hydraulic Motor

Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options.

Hydraulic Motor

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

More Clearance

Rotor

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

Rotor

Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

Greaseable Pins

Excavator Mount

This standard mounting plate is perfect for welding to your skid steer’s unique fitting.

Excavator Mount

Carbide Tipped

Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.

Carbide Tipped

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Multiple Teeth

Hydraulic Motor

Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options.

Hydraulic Motor

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

More Clearance

Rotor

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

Rotor

Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

Greaseable Pins

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS



Model No. S14 S18 S24 S28 S40
Recommended HP Size 12-30 25-80 30-80 50-120 50-120
Maximum Carrier Size Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI
Motor Type Gerotor Gerotor Gerotor Gerotor Bent Axis Piston
Hydraulic GPM Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart
Rotor Size 18" 24" 24" 24" 24"
Number of Teeth 12 34 34 34 20
Tooth Construction Wearsharp® Planer Planer Planer Wearsharp®
Cutting Wheel Speed Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM
Cutting Height - Above Ground No limit No limit No limit No limit No limit
Cutting Depth - Below Ground 6" 10" 10" 10" 24"
Maximum Cutting Depth - Per Pass 2" 5" 6" 6" 1"
Maximum Horizontal Cut 12" 22" 22" 22" 22"
Swing Arc Self-feeding Self-feeding 80° 80° 85°
Hub Torque 150 Ft.-Lbs. 250 Ft.-Lbs. 250 Ft.-Lbs. 803 Ft.-Lbs. -
Over Torque Protection Relieve valve Relieve valve Relieve valve Relieve valve Remote
Hitch 1" pivot pins 1" pivot pins Quick Attach Quick Attach Quick Attach
No. of Remotes Required - Hydraulic 1 1 1 1 1
Requires 12 Volt DC No No Yes Yes Yes
Unit Weight (Shipping) Lbs. 394 642 995 995 1,200
Model No. S14 S18 S24 S28 S40
Recommended HP Size 12-30 25-80 30-80 50-120 50-120
Maximum Carrier Size Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI
Motor Type Gerotor Gerotor Gerotor Gerotor Bent Axis Piston
Hydraulic GPM Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart
Rotor Size 18" 24" 24" 24" 24"
Number of Teeth 12 34 34 34 20
Tooth Construction Wearsharp® Planer Planer Planer Wearsharp®
Cutting Wheel Speed Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM
Cutting Height - Above Ground No limit No limit No limit No limit No limit
Cutting Depth - Below Ground 6" 10" 10" 10" 24"
Maximum Cutting Depth - Per Pass 2" 5" 6" 6" 1"
Maximum Horizontal Cut 12" 22" 22" 22" 22"
Swing Arc Self-feeding Self-feeding 80° 80° 85°
Hub Torque 150 Ft.-Lbs. 250 Ft.-Lbs. 250 Ft.-Lbs. 803 Ft.-Lbs. -
Over Torque Protection Relieve valve Relieve valve Relieve valve Relieve valve Remote
Hitch 1" pivot pins 1" pivot pins Quick Attach Quick Attach Quick Attach
No. of Remotes Required - Hydraulic 1 1 1 1 1
Requires 12 Volt DC No No Yes Yes Yes
Unit Weight (Shipping) Lbs. 394 642 995 995 1,200
36in Root Base

STUMP CUTTING TIMES BASED ON 24" STUMP

Motor Case Drain PSI 12 GPM 15 GPM 20 GPM 25 GPM 30 GPM 35 GPM 40 GPM CC Motor
Type
RPM at
MAX GPM
S250 Motor
Available for : S14
Not Required 2,500 50 min 40 min -- -- -- -- -- 50 Roller Vane 910
3,000 40 min 35 min -- -- -- -- --
S450 Motor
Available for : S14,S18
Not Required 2,500 60 min 40 min 35 min -- -- -- -- 125 Roller Vane 520
3,000 50 min 30 min 30 min -- -- -- --
3,500* -- 30 min 25 min 20 min 16 min -- --
3,500* -- -- 40 min 25 min 15 min 12 min 10 min

 * Motor will run at this PSI but excess pressure is dumping over relief.

HOW TO CHOOSE THE RIGHT MOTOR

The most important part of choosing the right BrushFire is matching the correct motor option to your equipment. It can make a huge difference. In this video, we explain how to use our charts to determine which motor is right for you!

Understanding Motor Understanding Motor
Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of November 15, 2019 5:58 PM EST

UPCOMING PUBLIC HOLIDAYS

Date Description

STUMP GRINDERS

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
WB44Stock5MTB
GWM53015%718MTBSame as HGW30Yellow Holt frame
HGW60Stock146MTB
1P24Stock3MTB
3P24Stock3
S105033Any 3P with valve kit (this covers all the time)
3P34Stock3
3P40Stock4
3P50154154NEED TO DESIGNNew 150 Hp model
3P60154154NEED TO DESIGNNew 200 hp model
S1429MTB
S18-S450Stock3MTBStock w/D001127 plate
S18-S550Stock3MTBStock w/D001127 plate
S18-S650Stock3Stock w/D001127 plate
S2424
S2829
S401010
GXM350310
GXM550310
GXM7501818

PUBLIC HOLIDAYS

Date Description