RSS580 - Planer - Skidsteer

RSS Skidsteer models have a Stump Planer tool that is designed to mount using a Skidsteer plate. The RSS model operates at a low RPM so that chips are contained during the operation with very little mess to clean up. Ideal for urban areas or confined spaces, the Stump Planer requires less power as it does not produce as fine material as a high speed cutting wheel. This enables larger stumps to be ground faster with smaller carriers, creating better mulch for other small trees. The Stump Planer tool features a hardened replaceable tip for extra-long wear and sharpenable cutting blades.

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

HEAVY DUTY BUILD

The Splinter screw wood splitter features a heavy-duty encasement that locks into place for long-lasting durability.

Heavy Duty Build

PROTECTIVE POWDER COAT FINISH

Heavy duty construction and a durable powder coated finish.

Protective Powder Coat Finish

PLANETARY DRIVE

Power comes from the Splinter’s hydraulically-driven planetary drive, delivering up to 3,800 ft/lbs of torque.

Planetary Drive

NO 12V ELECTRIC REQUIRED

With no extra electrical cables, connection is quick and easy.

No 12V Electric Required

MAIN SHAFT SEAL PROTECTION

The Splinter’s flange protects the main shaft seal to prevent damage to the Splinter’s bearings from possible debris.

Main Shaft Seal Protection

NO FLYING CHIPS

Because the Splinter operates at a low RPM, chips are contained during operation with very little mess to clean up.

No Flying Chips

IDEAL FOR URBAN AREAS

The planer is ideal for urban areas and confined spaces where keeping chips contained is critical.

Ideal For Urban areas

LARGER CHIPS

With less power required to produce fine material, larger stumps can be ground faster with small carriers, creating mulch for other small trees.

Larger Chips

HARDENED REPLACEABLE TIP

The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life.

Hardened Replaceable Tip

Heavy Duty Sharpenable Blades

The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. All cutting blades can be sharpened, lowering costs by not replacing blades as often.

Heavy Duty Sharpenable Blades

INTERNAL HOSE ROUTING

All of the hydraulic hoses on the Splinter are routed internally where possible and sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armor for double protection. The Splinter features travelling hose support and a greaseable pin on the hose support.

Internal Hose Routing

ANTI-SLIP MAT FOR EASY ACCESS TO CAB

For ease of entry and exit from the cab an anti-slip strip gives sure footing.

Anti Slip Mat For Easy Access To Cab

EASY TO CHANGE BITS

Easily change from splitting to grinding.

Easy To Change Bits

RUBBER MOUNTS

The Splinter’s rubber mounts help to soften the impact on the drive shaft.

Rubber Mounts

Auger Attachment

Pengo’s patented 40/50 dual angle bolt on cutting can be flipped from a 40 degree cut angle to a 50 degree cut angle for a more aggressive cut in clay and hard pack dirt. Aggressor augers also come standard with our Tri-Flow Pilot bit. The three cutting blades make it easier to start a hole and keep the bit straighter.

Auger Attachment

Log Splitter Attachment

Baumalight’s log splitter tool can split pieces of wood and logs up to 12 feet or even 20 ft long. The bit’s bite comes from machining two helical spirals machined into two pieces of steel. The two spirals join at the hardened tip for easy boring into the log.

Log Splitter Attachment

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

HEAVY DUTY BUILD

The Splinter screw wood splitter features a heavy-duty encasement that locks into place for long-lasting durability.

Heavy Duty Build

PROTECTIVE POWDER COAT FINISH

Heavy duty construction and a durable powder coated finish.

Protective Powder Coat Finish

PLANETARY DRIVE

Power comes from the Splinter’s hydraulically-driven planetary drive, delivering up to 3,800 ft/lbs of torque.

Planetary Drive

NO 12V ELECTRIC REQUIRED

With no extra electrical cables, connection is quick and easy.

No 12V Electric Required

MAIN SHAFT SEAL PROTECTION

The Splinter’s flange protects the main shaft seal to prevent damage to the Splinter’s bearings from possible debris.

Main Shaft Seal Protection

NO FLYING CHIPS

Because the Splinter operates at a low RPM, chips are contained during operation with very little mess to clean up.

No Flying Chips

IDEAL FOR URBAN AREAS

The planer is ideal for urban areas and confined spaces where keeping chips contained is critical.

Ideal For Urban areas

LARGER CHIPS

With less power required to produce fine material, larger stumps can be ground faster with small carriers, creating mulch for other small trees.

Larger Chips

HARDENED REPLACEABLE TIP

The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life.

Hardened Replaceable Tip

Heavy Duty Sharpenable Blades

The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. All cutting blades can be sharpened, lowering costs by not replacing blades as often.

Heavy Duty Sharpenable Blades

INTERNAL HOSE ROUTING

All of the hydraulic hoses on the Splinter are routed internally where possible and sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armor for double protection. The Splinter features travelling hose support and a greaseable pin on the hose support.

Internal Hose Routing

ANTI-SLIP MAT FOR EASY ACCESS TO CAB

For ease of entry and exit from the cab an anti-slip strip gives sure footing.

Anti Slip Mat For Easy Access To Cab

EASY TO CHANGE BITS

Easily change from splitting to grinding.

Easy To Change Bits

RUBBER MOUNTS

The Splinter’s rubber mounts help to soften the impact on the drive shaft.

Rubber Mounts

Auger Attachment

Pengo’s patented 40/50 dual angle bolt on cutting can be flipped from a 40 degree cut angle to a 50 degree cut angle for a more aggressive cut in clay and hard pack dirt. Aggressor augers also come standard with our Tri-Flow Pilot bit. The three cutting blades make it easier to start a hole and keep the bit straighter.

Auger Attachment

Log Splitter Attachment

Baumalight’s log splitter tool can split pieces of wood and logs up to 12 feet or even 20 ft long. The bit’s bite comes from machining two helical spirals machined into two pieces of steel. The two spirals join at the hardened tip for easy boring into the log.

Log Splitter Attachment

There are currently no customer photos or video submitted for this Baumalight product. Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model RSS380 RSS580 RSS780
Planer Tools 2" Hex 20" dia.4-knife stump planer(D002771) 2" Hex 20" dia.4-knife stump planer(D002771) 8-bolt flange mount stump planer(D003381)
Leading Knives 11" Span 11" Span 11" Span
Clean Up Knives 17" Span 17" Span 21" Span
Adaptor SkidSteer plate SkidSteer plate SkidSteer plate
Carrier weight for planer 5000 (Max lbs) 6000 (Max lbs) 10000 (Max lbs)
Carrier weight for splitter 7000 (Max lbs) 7000 (Max lbs) 12000 (Max lbs)
Rec. GPM 20-40 20-45 20-55
Max. GPM 45 45 65
Rec. PSI 2500-3000 2500-3000 2500-4500
Max PSI 3500 3500 5000
Drive Size 2" Hex 2" Hex 8 Bolt Flange
Drive Type Planetary Planetary Planetary
Hoses Included Yes Yes Yes
Model RSS380 RSS580 RSS780
Planer Tools 2" Hex 20" dia.4-knife stump planer(D002771) 2" Hex 20" dia.4-knife stump planer(D002771) 8-bolt flange mount stump planer(D003381)
Leading Knives 11" Span 11" Span 11" Span
Clean Up Knives 17" Span 17" Span 21" Span
Adaptor SkidSteer plate SkidSteer plate SkidSteer plate
Carrier weight for planer 5000 (Max lbs) 6000 (Max lbs) 10000 (Max lbs)
Carrier weight for splitter 7000 (Max lbs) 7000 (Max lbs) 12000 (Max lbs)
Rec. GPM 20-40 20-45 20-55
Max. GPM 45 45 65
Rec. PSI 2500-3000 2500-3000 2500-4500
Max PSI 3500 3500 5000
Drive Size 2" Hex 2" Hex 8 Bolt Flange
Drive Type Planetary Planetary Planetary
Hoses Included Yes Yes Yes
  PSI - Pounds Per Square Inch
  GPM - Gallons Per Minute
  RPM - Revolutions Per Minute
  Foot Pounds Torque
RSS380, RSS580, RSX380, RSX580
GPM 2,000 PSI 2,500 PSI 3,000 PSI 3,500 PSI
20 452,294 432,870 403,447 364,006
24 542,289 512,879 493,463 464,023
28 632,281 612,870 583,459 544,006
32 732,243 702,841 683,438 633,973
40 902,167 872,769 853,375 803,880

Case Drain : Good to Have

Learn More About Case Drains

RSS780, RSX780
GPM 3,000 PSI 3,300 PSI 4,000 PSI
20 198,424 199,264 1911,229
25 24.78,424 24.79,264 24.711,229
30 29.68,424 29.69,264 29.611,229
40 398,424 399,264 3911,229
50 498,424 499,264 4911,229
60 598,424 599,264 5911,229
70 698,424 699,264 6911,229

Case Drain : Crucial

Learn More About Case Drains


proper operation

How it Works Step 1

Step 1

When positioning the planer on a stump that is larger than the larger blade diameter, it is important to begin cutting from one side rather than the center. Shear down using the smaller leading blades until your cut is complete.

How it Works Step 2

Step 2

After your first cut is finished, start a new cut on the other side of the stump still using the smaller leading blades to make the cut.

How it Works Step 3

Step 3

Continue to move around the perimeter of the stump making more cuts. Do this until there are no outer ridges left on the stump.

How it Works Step 4

Step 4

Once the center area is smaller than the diameter of the larger blades, a final center cut is made using the larger cleanup blades to finish the job.

STUMP PLANER BIT

Planer Bit

CAUTION

When using the planer on a larger stump, if you begin cutting directly in the center of the stump, you will bore a center hole, leaving a ridge around the outer edge of the stump. If you do this, it will be difficult to properly cut the outer edges, instead you will just break off small chunks.

proper operation

Planer Correct Use

Improper operation

Planer Impropper Use


Replacement wear parts

D003508
D003508
D003930
D003930
Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of March 27, 2023 11:43 AM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description

SCREW SPLITTERS

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description
RSS380
RSS580
RSS780
RSX380
RSX580
RSX780
D002507 Hex mount Splinter
D003935 Flange mount splinter bit (refurbished bit in stock)
D002771 Hex Mount Planer
D003381 8 Bolt Flange Planer
D003218 2" Hex x 6" planer bit

PUBLIC HOLIDAYS

Date Description
2023-04-07Good Friday
2023-05-22Victoria Day