Mini Skid Steer Stump Grinder - S14

The S14 skid steer stump grinder is designed with simple operation in mind, with no required electrical connection. The direct flow hydraulic drive is designed to provide the best torque and RPM to the cutting head as no flow is diverted to a swing cylinder. The S14 mini tool carrier stump grinder features round carbide teeth which can be rotated three times, letting you grind stumps longer and faster on very low flow. The unique positioning of the rotor allows the operator an excellent view of the grinding action and the heavy duty fixed deflector safely directs the flow of debris. Cutting depth is up to 10" below ground. The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. The high number of teeth means that each tooth needs to do less work.

Each of the Stump Grinders teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement. The massive 0.5" thick steel rotor provides the back bone for the Stump grinder cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blast Grinder with the extra momentum needed when the grinding is tough, making sure the Stump Grinder can power through the hardest stumps. The S14’s size and the available mini skid steer mount makes it a great stump grinder for better access to tight areas and a nice addition to the rental offering on a mini skid steer. A S14 with a motor of S250 having a PSI of 2500 can cut a stump of 24 inches in 50 mins at 12 GPM, whereas the same motor parameter and increased PSI of 3000 can cut a stump of 24 inches in 40 mins at 12 GPM. If the GPM is increased to 15, the time taken will be reduced.
By a quick pull of two pins a standard size skidsteer plate can be put on as well.

6 Free Teeth Promo Hyd Flow and Pressure

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

An exception is that we sell directly to Equipment Rental Stores of most sizes. Click here for more info.

Local Support
Top 55% Bottom 45%

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

Service And Instructional Videos

Excavator Mount

This standard mounting plate is perfect for welding to your skid steer’s unique fitting.

Excavator Mount

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

6 FREE TEETH

All S14 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in the owner’s manual tub bolted to the frame.

6 free teeth

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Multiple Teeth

Hydraulic Motor

Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options.

Hydraulic Motor

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

More Clearance

Rotor

The massive ½" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

Rotor

Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

Greaseable Pins

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.

CUSTOMER PHOTOS

Baumalight S14 Stump Grinder in use by a customer who is renting a prototype Baumalight mini skidsteer


media discount program

Model No. S14 S16 S18 S24 S28 S40
Recommended HP Size Mini Skidsteer Mini Skidsteer 25-80 30-80 50-120 50-120
Maximum Carrier Size Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI Check GPM & PSI
Motor Type Gerotor Bent Axis Piston Gerotor Gerotor Gerotor Bent Axis Piston
Hydraulic GPM Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart Check Stump Cutting Size Chart
Rotor Size 18" 18" 24" 24" 24" 24"
Number of Teeth 12 24 34 34 34 20
Tooth Part number H3000 H3000 S1000 S1000 S1000 H3000
Tooth Construction High speed High speed Planer Planer Planer High speed
Cutting Wheel Speed Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM
Cutting Height - Above Ground No limit No limit No limit No limit No limit No limit
Cutting Depth - Below Ground 6" 6" 10" 10" 10" 24"
Maximum Cutting Depth - Per Pass 2" 2" 5" 6" 6" 1"
Maximum Horizontal Cut 12" 12" 22" 22" 22" 22"
Swing Arc Self-feeding 56° Self-feeding 60° 63° 85°
Hub Torque 150 Ft.-Lbs. - 250 Ft.-Lbs. 250 Ft.-Lbs. 803 Ft.-Lbs. -
Over Torque Protection Relieve valve Relieve valve Relieve valve Relieve valve Relieve valve Remote
Hitch 1" pivot pins 1" pivot pins Mini Plate Quick Attach Quick Attach Quick Attach
No. of Remotes Required - Hydraulic 1 1 1 1 1 1
Requires 12 Volt DC No Yes No Yes Yes Yes
Unit Weight (Shipping) Lbs. 394 400 642 995 995 1,200
36in Root Base

STUMP CUTTING TIMES BASED ON 24" STUMP

Motor Case Drain PSI 12 GPM 15 GPM 20 GPM 25 GPM 30 GPM 35 GPM 40 GPM CC Motor
Type		 RPM at
MAX GPM
S250 Motor
Available for : S14		 Not Required 2,500 50 min 40 min -- -- -- -- -- 50 Roller Vane 910
3,000 40 min 35 min -- -- -- -- --
S450 Motor
Available for : S14,S18		 Not Required 2,500 60 min 40 min 35 min -- -- -- -- 125 Roller Vane 520
3,000 50 min 30 min 30 min -- -- -- --
S550 Motor
Available for : S18		 Recommended 3,000 -- 30 min 25 min 20 min 16 min -- -- 130 Roller Vane 700
3,500* -- 30 min 25 min 20 min 16 min -- --
S650 Motor
Available for : S18		 Recommended 3,000 -- -- 40 min 25 min 15 min 12 min 10 min 245 Roller Vane 540
3,500* -- -- 30 min 20 min 10 min 8 min 6 min

 * Motor will run at this PSI but excess pressure is dumping over relief.

HOW TO CHOOSE THE RIGHT MOTOR

The most important part of choosing the right BrushFire is matching the correct motor option to your equipment. It can make a huge difference. In this video, we explain how to use our charts to determine which motor is right for you!

Understanding Motor Understanding Motor
Hydraulic Flow & Pressure Hydraulic Flow & Pressure
Factory discount logo
PRE-PRODUCTION TESTING
PRE-PRODUCTION
TESTING
Media
MEDIA
Floor/Demo Models
FLOOR/DEMO
MODELS

MODEL DISCOUNT CATEGORY LOCATION DESCRIPTION
S14-S25015%
Demo unit with full Warranty
*OFFERS INCLUDE FREE FREIGHT TO DEALER

PRODUCT DETAILS



PRE-PRODUCTION TESTING


Test our pre-production and prototype models for deep discounts by giving us all the necessary feedback to make sure these models meet the requirements demanded in the field. No Warranty can be provided on labour but you'll receive deep discounts through our dealer network as well as a 1 year warranty on parts* only. Baumalight understands this is not for everyone, but our discount program offers many benefits and we look forward to providing full warranty versions in the future once all product testing has been completed.

*Warranty labour must be performed by end user with no further compensation other than the deep discount off the original purchase price.


MEDIA


With any purchase from the following list you'll have the opportunity to work with our marketing agency to obtain photos and video footage for additional discounts or if you are located farther away we give a lesser discount for high definition pictures and video footage as well.


DEMO/FLOOR MODELS


Be sure to inquire about our many showroom floor,light demonstrator and discounted models
with available deep discounts.


logo
logo

UPCOMING PUBLIC HOLIDAYS

Date Description

STUMP GRINDERS

Model Number Discount Available Lead time to build
first order		 Lead time to build
next order		 Location Notes Discount Description

PUBLIC HOLIDAYS

Date Description
  • Show Ready

  • Financing