Excavator mounted Stump Grinder - GXM350

The GXM350 excavator stump grinder is designed with high performance in mind for 1.5 to 4 ton excavators equipped with 8 to 40 gallons per minute of flow. It features 16 green carbide teeth packed in groups of 4. The Wearsharp® Teeth can be rotated for a fresh edge up to three times, letting you grind stumps 3 times longer. Heavy tooth population makes finer mulch and allows much smoother operation, while the blast shield with double row chain curtain ensures debris stays put. The 19" rotor is powered by a bent axis piston motor, which provides ample stump grinding in virtually any location your excavator can reach. The GXM350 Baumalight stump grinder is offered with three motor options to best match your flow, be sure to check out the Stump Cutting Times charts below to see how fast you can grind stumps with the flow of your excavator.

6 Free Teeth Promo Hyd Flow and Pressure

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

Excavator Mount

This standard mounting plate is perfect for welding to your machine’s unique fitting.

Excavator Mount

Bent Axis Motor

Our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your brush clearing needs.

Bent Axis Motor

WEARSHARP® TEETH

By Green Manufacturing, Inc.

The unique design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over. This provides a consistent cut throughout the life of the tooth, allowing you to maintain a faster sweep speed. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

Wearsharp teeth

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Multiple Teeth

Rotor

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

Rotor

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

More Clearance

Blast Shield

The extra-large blast shield provides maximum chip and debris control with a dual row of safety chain curtains. The blast shield can also be used for cleanup and back filling without getting out of your cab.

Blast Shield

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

Excavator Mount

This standard mounting plate is perfect for welding to your machine’s unique fitting.

Excavator Mount

Bent Axis Motor

Our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your brush clearing needs.

Bent Axis Motor

WEARSHARP® TEETH

By Green Manufacturing, Inc.

The unique design of the Wearsharp® allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over. This provides a consistent cut throughout the life of the tooth, allowing you to maintain a faster sweep speed. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

Wearsharp teeth

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Multiple Teeth

Rotor

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

Rotor

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

More Clearance

Blast Shield

The extra-large blast shield provides maximum chip and debris control with a dual row of safety chain curtains. The blast shield can also be used for cleanup and back filling without getting out of your cab.

Blast Shield

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model No. S14 S18 GXM350 GXM550 GXM750
Excavator Adaptor Code A04 A04 A02 A02 A02
Recommended Carrier Size 1-2 ton 1.5-4 ton 1.5-4.5 ton 3.5-8 ton 7-18 ton
Motor Type Gerotor Gerotor High efficiency bent axis piston High efficiency bent axis piston High efficiency bent axis piston
Hydraulic GPM Check Motor Options Check Motor Options Check Motor Options Check Motor Options Check Motor Options
Rotor Size 18" 24" 19" 24" 24"
Number of Teeth 12 34 16 20 20
Tooth Construction Wearsharp® Planer Wearsharp® Wearsharp® Wearsharp®
Cutting Wheel Speed Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM
Cutting Height - Above Ground No limit No limit No limit No limit No limit
Cutting Depth - Below Ground 6" 10" 16" 24" 24"
Maximum Cutting Depth - Per Pass 2" 5" 3/4" 1" 1"
Maximum Horizontal Cut 12" 22" 12" 22" 22"
Over Torque Protection Relieve valve Relieve valve Relieve valve Relieve valve Relieve valve
Hitch 1" pivot pins 1" pivot pins Bolt on Bolt on Bolt on
No. of Remotes Required - Hydraulic 1 1 1 1 1
Requires 12 Volt DC No No No No No
Unit Weight (Shipping) Lbs. 394 642 650 822 1300
Model No. S14 S18 GXM350 GXM550 GXM750
Baumalight Connection Code A04 A04 A02 A02 A02
Recommended Carrier Size 1-2 ton 1.5-4 ton 1.5-4.5 ton 3.5-8 ton 7-18 ton
Motor Type Gerotor Gerotor High efficiency bent axis piston High efficiency bent axis piston High efficiency bent axis piston
Hydraulic GPM Check Motor Options Check Motor Options Check Motor Options Check Motor Options Check Motor Options
Rotor Size 18" 24" 19" 24" 24"
Number of Teeth 12 34 16 20 20
Tooth Construction Wearsharp® Planer Wearsharp® Wearsharp® Wearsharp®
Cutting Wheel Speed Depends on GPM Depends on GPM Depends on GPM Depends on GPM Depends on GPM
Cutting Height - Above Ground No limit No limit No limit No limit No limit
Cutting Depth - Below Ground 6" 10" 16" 24" 24"
Maximum Cutting Depth - Per Pass 2" 5" 3/4" 1" 1"
Maximum Horizontal Cut 12" 22" 12" 22" 22"
Over Torque Protection Relieve valve Relieve valve Relieve valve Relieve valve Relieve valve
Hitch 1" pivot pins 1" pivot pins Bolt on Bolt on Bolt on
No. of Remotes Required - Hydraulic 1 1 1 1 1
Requires 12 Volt DC No No No No No
Unit Weight (Shipping) Lbs. 394 642 650 822 1300
36in Root Base

EXCAVATOR STUMP CUTTING TIMES BASED ON 24" STUMP

Motor Case
Drain
PSI 12 GPM 15 GPM 20 GPM 25 GPM 30 GPM 35 GPM 40 GPM 50 GPM 60 GPM CC Motor
Type
RPM at
MAX GPM
4,000 20 min 15 min -- -- -- -- -- -- --
4,000 20 min 10 min 7 min 5 min -- -- -- -- --
4,000 -- 11 min 7 min 5 min 5 min -- -- -- --
4,000 -- -- 7 min 5 min 5 min 4 min -- -- --
4,000 -- -- -- 5 min 5 min 4 min 3 min -- --
4,000 -- -- -- -- 6 min 4 min 3 min 3 min --
4,000 -- -- -- -- -- -- 3 min 3 min 2 min

HOW TO CHOOSE THE RIGHT MOTOR

The most important part of choosing the right BrushFire is matching the correct motor option to your equipment. It can make a huge difference. In this video, we explain how to use our charts to determine which motor is right for you!

Understanding Motor Understanding Motor
Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of March 2, 2021 5:57 PM EST

UPCOMING PUBLIC HOLIDAYS

Date Description

STUMP GRINDERS

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
WB44Stock33MTB
HGW30110110MTB
HGW60R465465
1P24Stock17MTB
3P24Stock15
3P24-S1050Stock18S1050 kit mounted
S10501515Other 3P with valve kit (this covers all the time)
3P34Stock15
3P34-S1050Stock18S1050 kit mounted
3P401222
S143645
S165% + more for media250250Pre-Production Discount
S18-S450Stock15MTBStock w/D001127 plate
S18-S550Stock15MTBStock w/D001127 plate
S18-S650Stock15MTBStock w/D001127 plate
S243645
S284545
S405151
GXM3505151
GXM5505151
GXM7505454

PUBLIC HOLIDAYS

Date Description
2021-04-02Canadian public holiday - Do not count this as a production day