The FBS752 Skidsteer Mounted Feller Buncher we designed features a 52” cutting disc that can take up to 20” trees and is equipped with 18 Beaver cutting teeth. The tower is build with 4x4 tubing to allow more visibility for the operator and high stress areas use AR400 steel for added strength.
It has an electric-over-hydraulic system which operates efficiently on hydraulic flows as little as 25 gpm and is powered by a bent axis piston motor. Only one set of remote hydraulics is required to operate all functions if you have an AUX electrical connection.
The Feller Buncher has a 36" wide throat opening at the teeth. This allows you to do a nice low cut on trees with a wide root flair.
The upright frame of the FBS752 is open to improve the operator’s visibility while felling trees.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
The saw blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.
The durable shield encloses the blade for protection, directing the chips as it easily cuts through trees. Made with AR400 steel, the center log platform plate is designed to support the trees after they are cut.
The FBS752 makes clean work of cutting trees safely and quickly, leaving the trunks and stumps with a clean cut.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of forestry and helps prevent rusting.
To accommodate for different skidsteers that have the couplers on different sides, the FBS752's hose support can be mounted on the left or right side.
Take full advantage of the forward curl and roll back without risking expensive damage to the hoses. The spring loaded hose support prevents the hoses from falling into harm’s way during forward curl.
The new curved host bracket provides better support of the hose while reducing the risk of pinching or chafing.
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
To protect the hoses from damage, the FBS752 is designed with rounded edges.
To prevent trees from catching, the FBS752 is designed with rounded edges on the push bar so they more easily slid as you push into a leaning tree.
Unit comes with a large PSI pressure gauge for maintaining the optimal flow, giving you a clear indication of the most efficient performance.
The FBS752 Feller Buncher comes with a free set of 6 replacement teeth. These replacement teeth can be conveniently stored in the enclosed spare tool compartment.
The grabber arms have a robust design and are made with AR400 steel. The adjustable swing speed allows the operator better control when grabbing trees.
The buncher arm has a shielded spring to protect the spring from damage. The arm is also designed with greaseable pins in all pivot points.
For simple in-cab control, the FBS752 is available with Baumalight's Auxiliary Electrical Connection. This connection gives you simple quick connections and access to all the attachments functions using your machine's own controls.
For older Skidsteers without an auxiliary electrical connection we also have an optional in-cab adapter to plug into your Aux Electrical Connected attachments that will allow you to run them. Plug the adapter into the attachment, connect it to12V and now you can run your new attachment on an older skidsteer.
The skis are bolt-on for easy replacement.
When it comes time to service, the FBS752 is designed with full access to for easier service.
Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.
Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.
|Skidsteer Mounted||Excavator Mounted||Excavator Mounted||Excavator Mounted|
|Fixed Horizontal Blade||Fixed Horizontal Blade||90° Pivot Blade||360° Slew drive|
|Universal Skidsteer Adaptor||Bolt-on Adaptor||Bolt-on Adaptor
|4000 PSI||4000 PSI||4000 PSI||4000 PSI|
|Requires 12V Electric||Requires 12V Electric||Requires 12V Electric||Requires 12V Electric|
|Four 12V positive switchable signals required||Four 12V positive switchable signals required||Six 12V positive switchable signals required||Six 12V positive switchable signals required|
|Wire Supplied to AUX||Wire NOT Supplied||Wire NOT Supplied||Wire NOT Supplied|
Couplers NOT Included
|Hoses & Couplers NOT Included||Hoses & Couplers NOT Included||Hoses & Couplers NOT Included|
|52" Diameter Blade||52" Diameter Blade||52" Diameter Blade||52" Diameter Blade|
|20" Max Cut||20" Max Cut||20" Max Cut||20" Max Cut|
|1" Steel Blade||1" Steel Blade||1" Steel Blade||1" Steel Blade|
|1 5/8" Cutt Thickness||1 5/8" Cutt Thickness||1 5/8" Cutt Thickness||1 5/8" Cutt Thickness|
|4 Edges Per Tooth||4 Edges Per Tooth||4 Edges Per Tooth||4 Edges Per Tooth|
|18 Teeth||18 Teeth||18 Teeth||18 Teeth|
|B8000 Beaver Teeth||B8000 Beaver Teeth||B8000 Beaver Teeth||B8000 Beaver Teeth|
|Throat Opening at teeth: 36"||36" Throat Opening||36" Throat Opening||36" Throat Opening|
The ideal solution. The operator can easily control all functions using the controls already equipped on the carrier joysticks. This allows the operator to never remove their hands from the controls to change a function.
Another option, although less than ideal, for controlling the attachment is using our wired control box. The operator would use the toggle switches on the control box to control the functions required. The wired control box requires a 12V connection to supply power.
Note; For best recovery time pick the largest motor option that matches to your skidsteer.
HOW TO CHOOSE THE RIGHT MOTOR
The most important part of choosing the matching the correct motor option to your equipment is understanding how it works as the motor can make a huge difference.
If you pick a motor that is to small for your machine then the rotor will be forced the rotor to spin much faster and will take longer to reach its max speed, this will bog down your carrier as you attempt to move to the next tree. A larger motor has a larger displacement which means more torque to get the rotor up to speed so you win in two ways by going as large as you can.
|2021-04-02||Canadian public holiday - Do not count this as a production day|