DXM530 Manual Rotation Tree Saw for Excavators

Extend your reach and easily cut and trim tall trees with Baumalight's DXM530 hydraulically-driven tree saw for excavators. To ensure the right angle of attack, the DXM530 features a manual rotating cutting head, allowing a 90 degree rotation from horizontal cutting to vertical cutting. With heavy-duty construction and multiple motor options, the DXM530 offers replaceable carbide-tipped teeth that can be rotated up to three times for renewed cutting performance.

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

MANUAL ROTATING CUTTING HEAD

Effectively switch from horizontal tree cutting position to vertical trimming and limbing position with the 90 degree manual rotating head. Simply remove the 4 bolts at the base of the cutting head, rotate the unit 90 degrees to the left or right and then secure the bolts.

Manual rotating cutting head

Heavy duty build

The tree saw’s durable design and quality materials combine to create a saw that is able to stand up to the demanding work of cutting limbs and trees.

Heavy duty build

Blade mounted on heavy duty bearing support

The tree saw's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.

Blade mounted on heavy duty bearing support

Saw blade shielding

The durable shield encloses the blade for protection, directing the chips as it easily cuts through limbs and trees.

Saw blade shielding

Designed for maximum visibility

Making sure you have the best seat in the house, the tree saw was designed with maximum visibility in mind, allowing you to make cleaner and better cuts.

Designed for maximum visibility

Easy Access Panels for Service

Built for the long haul, the tree saw has multiple removable panels for easier access and servicing.

Easy access panels for service

Clean Cuts

The tree saw makes clean work of limbing and trimming trees safely and quickly, leaving pruned trees with a clean cut.

Clean cuts

Better Access

Excavators can also go where tractors and skid steers cannot, giving you and your tree saw access to areas that had to be cleared by hand in the past. Now you can quickly and cleanly trim, limb and cut more efficiently than before.

Better access

Bolt-on excavator adaptor

Our bolt-on mounting adaptors provide strength and future flexibility. If needed, your tree saw can easily be bolted to another adaptor to mount to your new excavator.

Bolt on excavator adaptor

Available with Gear motor or BENT AXIS PISTON MOTOR

Gear motors are a good cost effectvie choice for the average user and our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.

Bent axis piston motor

PROTECTIVE POWDER COAT FINISH

Heavy duty construction and a durable powder coated finish.

Protective powder coat finish

FRONT PUSH BAR

A solid serrated steel plate up front helps guide limbs, branches and small trees safely away from the operator.

Front push bar

INTERNAL HOSE ROUTING

All of the hydraulic hoses on the DropSaw are sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armour for double protection. The hoses are then routed internally, keeping them out of harm’s way. The DropSaw also features a pivoting arm with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.

Internal hose routing

AR400 STEEL BLADE

The tree saw’s heavy duty circular blade is designed and shaped from AR-400 steel. This abrasion resistant steel is rugged and ready for the abuse of a long service life.

AR400 steel blade

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

EASY TEETH CHANGING

The high speed teeth design allows for easy rotation and changing of the teeth as needed.

Easy teeth changing

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model # DXM530 DXA530 DXD752 DXH752
Baumalight Connection Code A02 A02 A03 A03
Adaptor Bolt-on Bolt-on Bolt-on Bolt-on
Blade Angle 180° 180° 360° Horizontal
Rotation Manual Actuator Slew Drive Fixed
Actuator - Helical Slew Drive -
GPM 18-35 20-40 30-70 30-70
PSI 4,000 4,000 4,000 4,000
Requires 12V Electric No 2 Positive Pins 2 Positive Pins No
Hydraulic Hose Not Supplied Not Supplied Not Supplied Not Supplied
Hydraulic Couplers Not Supplied Not Supplied Not Supplied Not Supplied
Blade Diameter 30" 30" 52" 52"
Max Cut 10" 10" 20" 20"
Blade Material AR400 AR400 1" Steel 1" Steel
Cut Thickness 3/4" 3/4" 1-5/8" 1-5/8"
Tooth Part number H3000 H3000 B8000 B8000
Type of Teeth High Speed Teeth High Speed Teeth Beaver Beaver
Number of Edges per Tooth 3 3 4 4
Number of Teeth 12 12 17 17
Model # DXM530 DXA530 DXD752 DXH752
Baumalight Connection Code A02 A02 A03 A03
Adaptor Bolt-on Bolt-on Bolt-on Bolt-on
Blade Angle 180° 180° 360° Horizontal
Rotation Manual Actuator Slew Drive Fixed
Actuator - Helical Slew Drive -
GPM 18-35 20-40 30-70 30-70
PSI 4,000 4,000 4,000 4,000
Requires 12V Electric No 2 Positive Pins 2 Positive Pins No
Hydraulic Hose Not Supplied Not Supplied Not Supplied Not Supplied
Hydraulic Couplers Not Supplied Not Supplied Not Supplied Not Supplied
Blade Diameter 30" 30" 52" 52"
Max Cut 10" 10" 20" 20"
Blade Material AR400 AR400 1" Steel 1" Steel
Cut Thickness 3/4" 3/4" 1-5/8" 1-5/8"
Tooth Part number H3000 H3000 B8000 B8000
Type of Teeth High Speed Teeth High Speed Teeth Beaver Beaver
Number of Edges per Tooth 3 3 4 4
Number of Teeth 12 12 17 17

Cutting Time for 10" Limb

MOTOR MOTOR
TYPE
CC CASE DRAIN RPM AT
MAX GPM
PSI 9
GPM
12
GPM
15
GPM
20
GPM
25
GPM
30
GPM
40
GPM
T508 Piston 25
T530 Piston 47
Understanding Motor Understanding Motor
Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of June 11, 2021 5:08 PM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description

Tree Saw

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
DSM230-T5084343T508
DSM230-T508G20%Stock43T508GDemo Unit used for testing mini skidsteers
DSM530-T5083543T508
DSM530-T508G3543T508G
DSM530-T5303543T530
DSM530-T530G3543T530G
DSA530-T5083543T508
DSA530-T508G3543T508G
DSA530-T5303543T530
DSA530-T530G3543T530G
DXM530-T5083543T508
DXM530-T508G3543T508G
DXM530-T5303543T530
DXM530-T530G3543T530G
DXA530-T5083543T508
DXA530-T508G3543T508G
DXA530-T5303543T530
DXA530-T530G3543T530G
DXH7524646
DXD75225% to 35%8383Preproduction - $35,000 List PricePreproduction/Media Discount
DPH5303543MTNew Green teeth design
DPH7355353Preproduction

PUBLIC HOLIDAYS

Date Description
2021-07-02Canada day