CP572 PTO Rotary Brush Mower

4 blades come standard on the CP572 tractor mount 72” rotary bush mower. The Brush Bar helps to funnel brush under the Brush Cutt to the waiting blades. The double arch design of the push bar works to pull the taller, heavier brush to the hardened blades, making quick work of woody brush and saplings. If you have a 45 to 75 Hp tractor then adding a 3-point hitch rotary mower Brush Cutt attachment will help you maintain fence lines, improve pasture land as well as lane and road side weed control rough cut grass cutting.

Two Cuts per Pass

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.

Two Cuts per Pass and a Real Slasher

Gear Box

The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.

Gear Box

Chain Curtain

A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Brush Cutt uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.

Chain Curtain

4-Way Model

Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second.

4-Way Model

Rotor

Using a 3/4" top plate and a 3/8" bottom plate this heavy duty rotor sandwiches the 4–way blade assembly in place.

Rotor

Shield

To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy-duty output shaft shield.

Shield

Powder Coated Finish

Heavy-duty construction and a durable powder-coated finish.

Powder Coated Finish

Open Front with Push Bar

The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.

Open Front with Push Bar

Two Cuts per Pass

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.

Two Cuts per Pass and a Real Slasher

Gear Box

The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.

Gear Box

Chain Curtain

A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Brush Cutt uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.

Chain Curtain

4-Way Model

Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second.

4-Way Model

Rotor

Using a 3/4" top plate and a 3/8" bottom plate this heavy duty rotor sandwiches the 4–way blade assembly in place.

Rotor

Shield

To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy-duty output shaft shield.

Shield

Powder Coated Finish

Heavy-duty construction and a durable powder-coated finish.

Powder Coated Finish

Open Front with Push Bar

The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.

Open Front with Push Bar

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS

CUSTOMER VIDEO



Model No. CP560 CP572
Maximum Brush Size 4" 4"
Discharge Protection Open Front with Push Bar
Link Chain Curtain on Back
Open Front with Push Bar
Link Chain Curtain on Back
Path Width 70" 82"
Cutting Width 60" 72"
Low Cutting Height 2.5" 2.5"
Number of Blades 4 4
Slashes per Second 52 52
Attachment Type CAT 2 CAT 2
Maximum Engine HP 75 85
Maximum PTO HP 65 75
Minimum Carrier Weight 4000 lbs. 5000 lbs.
System Protection 2-Disk Clutch 4-Disk Clutch
Shipping Dimensions (LxWxH) 88"x72"x36" 88"x72"x36"
Deck Structure 1/4" steel 1/4" steel
Unit Weight 1600 lbs. 1900 lbs.
Shipping Weight 1550 lbs. 1885 lbs.
Model No. CP560 CP572
Maximum Brush Size 4" 4"
Discharge Protection Open Front with Push Bar
Link Chain Curtain on Back
Open Front with Push Bar
Link Chain Curtain on Back
Path Width 70" 82"
Cutting Width 60" 72"
Low Cutting Height 2.5" 2.5"
Number of Blades 4 4
Slashes per Second 52 52
Attachment Type CAT 2 CAT 2
Quick hitch compatibility No No
Maximum Engine HP 75 85
Maximum PTO HP 65 75
Minimum Carrier Weight 4000 lbs. 5000 lbs.
System Protection 2-Disk Clutch 4-Disk Clutch
Shipping Dimensions (LxWxH) 88"x72"x36" 88"x72"x36"
Deck Structure 1/4" steel 1/4" steel
Unit Weight 1600 lbs. 1900 lbs.
Shipping Weight 1550 lbs. 1885 lbs.
logo
logo
Updated as of October 19, 2020 5:11 PM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description

BRUSH CUTT

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
CF3601217
CF5601217
CF3721217
CF572-M4501212BPM450
CF572-M550Stock12BPM550
CF572-M650Stock12BPM650
CP5601217
CP5721313
CX3602222
CX3729292New Model
CXC5301217
CXC542517
CXC5501218
CSC7441919
CSC76010%Stock20MTBNew and demo units in stock! Floor Model

PUBLIC HOLIDAYS

Date Description
2020-12-25Christmas Day
2020-12-26Boxing Day