4 blades come standard on the CP560 tractor mount 60” rotary bush mower. The Brush Bar helps to funnel brush under the Brush Cutt to the waiting blades. The double arch design of the push bar works to pull the taller, heavier brush to the hardened blades, making quick work of woody brush and saplings. If you have a 40 to 65 Hp tractor then adding a 3-point hitch rotary mower Brush Cutt attachment will help you maintain fence lines, improve pasture land as well as lane and road side weed control rough cut grass cutting.
As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.
The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.
A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Brush Cutt uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.
Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second.
Using a 3/4" top plate and a 3/8" bottom plate this heavy duty rotor sandwiches the 4–way blade assembly in place.
To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy-duty output shaft shield.
Heavy-duty construction and a durable powder-coated finish.
The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.
As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.
The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.
A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Brush Cutt uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.
Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second.
Using a 3/4" top plate and a 3/8" bottom plate this heavy duty rotor sandwiches the 4–way blade assembly in place.
To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy-duty output shaft shield.
Heavy-duty construction and a durable powder-coated finish.
The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.
| Model No. | CP560 | CP572 |
|---|---|---|
| Maximum Brush Size | 4" | 4" |
| Discharge Protection | Open Front with Push Bar Link Chain Curtain on Back |
Open Front with Push Bar Link Chain Curtain on Back |
| Path Width | 70" | 82" |
| Cutting Width | 60" | 72" |
| Low Cutting Height | 2.5" | 2.5" |
| Number of Blades | 4 | 4 |
| Slashes per Second | 52 | 52 |
| Attachment Type | CAT 2 | CAT 2 |
| Maximum Engine HP | 75 | 85 |
| Maximum PTO HP | 65 | 75 |
| Minimum Carrier Weight | 4000 lbs. | 5000 lbs. |
| System Protection | 2-Disk Clutch | 4-Disk Clutch |
| Shipping Dimensions (LxWxH) | 88"x72"x36" | 88"x72"x36" |
| Deck Structure | 1/4" steel | 1/4" steel |
| Unit Weight | 1600 lbs. | 1900 lbs. |
| Shipping Weight | 1550 lbs. | 1885 lbs. |
| Model No. | CP560 | CP572 |
|---|---|---|
| Maximum Brush Size | 4" | 4" |
| Discharge Protection | Open Front with Push Bar Link Chain Curtain on Back |
Open Front with Push Bar Link Chain Curtain on Back |
| Path Width | 70" | 82" |
| Cutting Width | 60" | 72" |
| Low Cutting Height | 2.5" | 2.5" |
| Number of Blades | 4 | 4 |
| Slashes per Second | 52 | 52 |
| Attachment Type | CAT 2 | CAT 2 |
| Quick hitch compatibility | No | No |
| Maximum Engine HP | 75 | 85 |
| Maximum PTO HP | 65 | 75 |
| Minimum Carrier Weight | 4000 lbs. | 5000 lbs. |
| System Protection | 2-Disk Clutch | 4-Disk Clutch |
| Shipping Dimensions (LxWxH) | 88"x72"x36" | 88"x72"x36" |
| Deck Structure | 1/4" steel | 1/4" steel |
| Unit Weight | 1600 lbs. | 1900 lbs. |
| Shipping Weight | 1550 lbs. | 1885 lbs. |
| Date | Description |
|---|
| Model Number | Discount Available | Number of Business Days to build first order |
Number of Business Days to build next order |
Location | Notes | Discount Description |
|---|---|---|---|---|---|---|
| CF360 | 10 | 10 | ||||
| CF560 | 6 | 10 | ||||
| CF372 | 6 | 10 | ||||
| CF572-M450 | 6 | 6 | BP | M450 | ||
| CF572-M550 | 6 | 6 | BP | M550 | ||
| CF572-M650 | Stock | 6 | BP | M650 | ||
| CP560 | 6 | 10 | ||||
| CP572 | 6 | 10 | ||||
| CX360 | 15 | 15 | ||||
| CX372 | 85 | 85 | New Model | |||
| CXC530 | 6 | 10 | ||||
| CXC542 | 9% | 2 | 10 | Floor Model - HX530 Motor Option | ||
| CXC550 | 6 | 11 | ||||
| CSC744 | 15% | 3 | 12 | BP | Floor Model - Can be equipped with any motor | |
| CSC760 | 10% | Stock | 13 | MTB | New and demo units in stock! | Floor Model |
| Date | Description |
|---|---|
| 2020-09-07 | Labour Day |
| 2020-10-12 | Thanksgiving |
| 2020-12-25 | Christmas Day |
| 2020-12-26 | Boxing Day |
