CF772 Open Front Skid Steer Rotary Brush Cutter Model

The rugged frame of the CF772 heavy-duty rotary brush cutter houses four AR400 blades featuring an 83" path width. The 1/4” steel deck is designed to stand up and perform in rough terrain while cutting trees, brush, unwanted weeds and grass. The 72" wide open mouth of this unit allows you to cut down larger trees in a sawing action.
Standard on the 700 series rotary brush cutter, the Brush Bar helps to funnel brush under the Rotary Brush Cutter to the AR400 blades. The serrated open front design of the push bar works to push the taller, heavier brush to the hardened blades, making quick work of woody brush and saplings.

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

Two Cuts per Pass

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Rotary brush cutter advances forward. The curved cutting tips of the slasher blades give the Rotary brush cutter two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Rotary brush cutter’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.

Two Cuts per Pass and a Real Slasher

Gear Box

Standard on all Rotary brush cutter models is a relief valve. Set at 3,000 psi, this valve disengages the driveline if the hydraulic system pressure is too great, thereby protecting both the skidsteer and the Rotary Brush Cutter.

The Rotary brush cutter uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups, these gearboxes prevent shocks from cutting being passed to the drive motor.

Gear Box

Hose Armour

Standard on all Rotary brush cutter models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.

Hose Armour

Slasher Blades

Crafted from 1/4" AR 400 steel, the unique profile of the slasher blades provides increased cutting surface. The blade’s thin reversible profile continuously provides a sharp edge.

Slasher Blades

Blade Mount

To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade; this spacing helps to reduce the blade from binding while in operation.

Blade Mount

Chain Curtain

A heavy duty chain curtain reduces discharge of debris. Unlike traditional chain curtains Baumalight’s Rotary brush cutter utilizes a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.

Chain Curtain

4-Way Model

Designed for easy service, the four-way models feature a heavy-duty rotor with four fixed extensions. Each extension is finished off with a slasher blade. This configuration is capable of providing up to 52 slashes per second.

4-Way Model

FREE BLADE SET

All CF572 Rotary brush cutter come with a free set of replacement blades on a new purchase. These replacement blades are conveniently secured on the wooden shipping skid.

Free Blade Set

Rotor

Using a 3/4" top plate and a 3/8" bottom plate, this heavy duty rotor sandwiches the four–way blade assembly in place.

Rotor

Shield

To protect the output shaft from impact or contamination caused by debris, each model of Rotary brush cutter is finished off with a heavy-duty output shaft shield.

Shield

Powder Coated Finish

Heavy-duty construction and a durable powder-coated finish.

Powder Coated Finish

Open Front with Push Bar

The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.

Open Front with Push Bar

Anti-Slip Strip

Extra traction from anti-slip strips provides improved safety as well as ease of entry and exit from the cab.

Anti-Slip Strip

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

Two Cuts per Pass

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Rotary brush cutter advances forward. The curved cutting tips of the slasher blades give the Rotary brush cutter two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in 4 blade configurations the Rotary brush cutter’s reversible/replaceable blades are made of long lasting 1/2" AR 400 steel.

Two Cuts per Pass and a Real Slasher

BLADE MOUNTED ON HEAVY DUTY BEARING SUPPORT

The CF772 Rotary Brush Cutter's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.

Blade Mounted on Heavy Duty Bearing Support

EASY ACCESS PANELS FOR SERVICE

Built for the long haul, CF772 has removable panel for easier access and servicing.

Easy access panels for service

Hose Armour

Standard on all Rotary brush cutter models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.

Hose Armour

Slasher Blades

Crafted from 1/2" AR 400 steel, the unique profile of the slasher blades provides increased cutting surface. The blade’s thick reversible profile helps in maximum brush felling.

Slasher Blades

FREE BLADE SET

All CF772 Rotary brush cutter come with a free set of replacement blades on a new purchase. These replacement blades are conveniently secured on the wooden shipping skid.

Free Blade Set

Serrated Teeth Rotor

CF772 uses 3/4" heavy duty circular rotor designed with unique serrated edges. Serrated edge on the rotor helps to increase the mulching action and it also protects the load adaptor bearing setup.

Serrated Teeth Rotor

SUPPLIED WITH BENT AXIS PISTON MOTOR

Our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.

Supplied with bent axis piston motor

CASE DRAIN – VENT TO ATMOSPHERE

To prevent pressure relief activation on the motor seal, the rotary brush cutter CF772 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. To learn more CLICK HERE about the case drain line.

Case Drain – Vent To Atmosphere

STEP GRIP IN FRAME

The powder coated frame has multiple anti-slip pads and laser cut steps, giving the operator a secure footing for easy entry and exit from the cab.

Step Grip in Frame

Powder Coated Finish

Heavy-duty construction and a durable powder-coated finish.

Powder Coated Finish

Open Front with Push Bar

The open front with push bar provides extra control against thick brush and the felling of trees, while the teeth hold the brush as the blades chew it up from below.

Open Front with Push Bar

Anti-Slip Strip

Extra traction from anti-slip strips provides improved safety as well as ease of entry and exit from the cab.

Anti-Slip Strip

There are currently no customer photos or video submitted for this Baumalight product. Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model No. CF360 CF372 CF560 CF572
Available Motor Options M450, M550, M650 M450, M550, M650 M450, M550, M650 M450, M550, M650
Recommended GPM Check Motor Options Check Motor Options Check Motor Options Check Motor Options
Maximum Brush Size 2" 2" 4" 4"
Discharge Protection Link Chain Curtain
Front and Back
Link Chain Curtain
Front and Back
Open Front with Push Bar Link Chain Curtain on Back Open Front with Push Bar Link Chain Curtain on Back
Path Width 70" 82" 70" 82"
Cutting Width 60" 72" 60" 72"
Low Cutting Height 2.5" 2.5" 2.5" 2.5"
Number of Blades 2 2 4 4
Attachment Type Universal Skid-Steer Plate Universal Skid-Steer Plate Universal Skid-Steer Plate Universal Skid-Steer Plate
Maximum HP Check Flow & PSI on Skid Steer Check Flow & PSI on Skid Steer Check Flow & PSI on Skid Steer Check Flow & PSI on Skid Steer
Min Carrier Weight 4,000 lb 4,500 lb 4,500 lb 5,000 lb
System Protection Built In Hydraulic Built In Hydraulic Built In Hydraulic Built In Hydraulic
Dimensions (LxWxH) 88"x72"x36" 90"x84"x36" 88"x72"x36" 90"x84"x36"
Deck Structure 1/4" steel 1/4" steel 1/4" steel 1/4" steel
Unit Weight 1342 lbs. 1390 lbs. 1540 lbs. 1570 lbs.
Model No. CF360 CF372 CF560 CF572 CF772
Available Motor Options M450, M550, M650 M450, M550, M650 M450, M550, M650 M450, M550, M650 HX590
Recommended GPM Check Motor Options Check Motor Options Check Motor Options Check Motor Options Check Motor Options
Max Brush Felling Size 2" 2" 4" 4" 6"
Discharge Protection Link Chain Curtain
Front and Back
Link Chain Curtain
Front and Back
Open Front with Push Bar Link Chain Curtain on Back Open Front with Push Bar Link Chain Curtain on Back Open Front with Push Bar
Path Width 70" 82" 70" 82" 83"
Cutting Width 60" 72" 60" 72" 72"
Low Cutting Height 2.5" 2.5" 2.5" 2.5" 2.5"
Number of Blades 2 2 4 4 4
Attachment Type Universal Skid-Steer Plate Universal Skid-Steer Plate Universal Skid-Steer Plate Universal Skid-Steer Plate Universal Skid-Steer Plate
Maximum HP Check Flow & PSI on Skid Steer Check Flow & PSI on Skid Steer Check Flow & PSI on Skid Steer Check Flow & PSI on Skid Steer Check Flow & PSI on Skid Steer
Min Carrier Weight 4,000 lb 4,500 lb 4,500 lb 5,000 lb 6,000 lb
System Protection Built In Hydraulic Built In Hydraulic Built In Hydraulic Built In Hydraulic Built In Hydraulic
Dimensions (LxWxH) 88"x72"x36" 90"x84"x36" 88"x72"x36" 90"x84"x36" 84"x83"x30"
Deck Structure 1/4" steel 1/4" steel 1/4" steel 1/4" steel 1/4" steel
Unit Weight 1342 lbs. 1390 lbs. 1540 lbs. 1570 lbs. 1960 lbs.

BRUSH CUTTING SIZE CHART (Brush Diameter in Inches)

MOTOR MOTOR TYPE PSI CASE DRAIN 6
GPM
12
GPM
15
GPM
20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
RPM 946 1100 1260 1420 1580

Triple diameter capacity for felling trees, a rotor speed of over 1,800rpm is not recommended on 42" or larger.

HOW TO CHOOSE THE RIGHT MOTOR

The most important part of choosing the right Brush Mulcher is matching the correct motor option to your equipment. It can make a huge difference. In this video, we explain how to use our charts to determine which motor is right for you!

Understanding Motor Understanding Motor
Hydraulic Flow & Pressure Hydraulic Flow & Pressure
Baumalight - Factory Discounts
Factory discount logo
PRE-PRODUCTION TESTING
PRE-PRODUCTION
TESTING
Media
MEDIA
Floor/Demo Models
FLOOR/DEMO
MODELS

MODEL DISCOUNT CATEGORY LOCATION DESCRIPTION
CF772-HX59010%
Deck just a touch narrow so blade are trimmed 1/4"
*OFFERS INCLUDE FREE FREIGHT TO DEALER

PRODUCT DETAILS




PRE-PRODUCTION TESTING


Test our pre-production and prototype models for deep discounts by giving us all the necessary feedback to make sure these models meet the requirements demanded in the field. No Warranty can be provided on labour but you'll receive deep discounts through our dealer network as well as a 1 year warranty on parts* only. Baumalight understands this is not for everyone, but our discount program offers many benefits and we look forward to providing full warranty versions in the future once all product testing has been completed.

*Warranty labour must be performed by end user with no further compensation other than the deep discount off the original purchase price.


MEDIA


With any purchase from the following list you'll have the opportunity to work with our marketing agency to obtain photos and video footage for additional discounts or if you are located farther away we give a lesser discount for high definition pictures and video footage as well.


DEMO/FLOOR MODELS


Be sure to inquire about our many showroom floor,light demonstrator and discounted models
with available deep discounts.



logo
logo
Updated as of January 30, 2023 3:18 PM EST

UPCOMING PUBLIC HOLIDAYS

Date Description

ROTARY BRUSH CUTTER

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
CF360
CF560
CF372
CF572-M450
CF572-M550
CF572-M650
CF772-HX59010% New Heavy duty modelDeck just a touch narrow so blade are trimmed 1/4"
CP560
CP572
CXC530
CXC530-HX510
CXC54210% on stock unit Stock with discount on HX540 with HX530 counted priceLow hour demo unit
CXC550

PUBLIC HOLIDAYS

Date Description
2023-02-20Family day, Business Closed for Public holiday