PUT SOME

TEETH

INTO IT

MS248 MS348 MS548 MS560 MS572 I_Series_MS760 I_Series_MS772 MS960

MS248 Flail Mulcher for Skid Steer

Our most economical brush mulcher for skidsteers. With adequate flow, the MS248 Brush Fire flail cutter will efficiently cut heavy grass and small diameter brush using 30 flail teeth. Flail teeth will swing back when hitting stones so less damage is done to the flail tooth.
Operating a Brush Mulcher from a skid steer is probably the most comfortable way for vegetation management, as your work is directly in front of you and new skidsteers are very operator-comfort focused.
See our brush cutting size chart to see how much this light weight skidsteer mounted forestry mulcher can tear up.

Integrated skid shoes

These durable skid shoes help the Brush Fire to better float over the ground for optimal mulching action.

Integrated skid shoes

Hydraulic Flow & Pressure Database

For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.

Click here for details.

Hydraulic flow pressure

200 SERIES FLAIL TEETH

Currently available on our 200 Series Brush Fire mulchers, these flail type cutters are an economic and efficient way to beat back heavy vegetation and light to moderate brush. Ideally suited for small carriers, these flails provide good cutting performance and great mulching. Bolt-on replaceable for quick and easy servicing, even in the field.

Upgrade to our Heavy Blade Teeth and instantly increase your mulching capacity. These upgraded heavy duty blade teeth are 6mm thick and will allow you to double your brush size mulching capacity without any other equipment adjustments required.

200 Series flail teeth

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Overtorque Protection - Relief Valve

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

Overtorque protection relief valve

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gearbox to the rotor. Not only does this belt refuse to back down in the face of dense brush, it also offers protection from the shocks inherent in mulching.

Reinforced belt

Powder Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coated

ARMOURED AND SLEEVED

Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.

Armoured and sleeved

Anti Slip Strips

For ease of entry and exit from the cab an anti-slip strip gives sure footing.

Anti slip strips

Integrated skid shoes

These durable skid shoes help the Brush Fire to better float over the ground for optimal mulching action.

Integrated skid shoes

Hydraulic Flow & Pressure Database

For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.

Click here for details.

Hydraulic flow pressure

200 SERIES FLAIL TEETH

Currently available on our 200 Series Brush Fire mulchers, these flail type cutters are an economic and efficient way to beat back heavy vegetation and light to moderate brush. Ideally suited for small carriers, these flails provide good cutting performance and great mulching. Bolt-on replaceable for quick and easy servicing, even in the field.

Upgrade to our Heavy Blade Teeth and instantly increase your mulching capacity. These upgraded heavy duty blade teeth are 6mm thick and will allow you to double your brush size mulching capacity without any other equipment adjustments required.

200 Series flail teeth

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Overtorque Protection - Relief Valve

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

Overtorque protection relief valve

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gearbox to the rotor. Not only does this belt refuse to back down in the face of dense brush, it also offers protection from the shocks inherent in mulching.

Reinforced belt

Powder Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coated

ARMOURED AND SLEEVED

Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.

Armoured and sleeved

Anti Slip Strips

For ease of entry and exit from the cab an anti-slip strip gives sure footing.

Anti slip strips

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS

CUSTOMER VIDEO



Model No. MS248 MS348 MS548 MS560 MS572 iSeries MS760 iSeries MS772 MS960
Path Width 60" 60" 62" 75" 87" 75" 84" 75"
Rotor Width 48" 48" 48" 60" 72" 60" 72" 60"
Minimum Engine HP 25 30 45 60 65 65 80 65
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Level to 2" Below Level to 2" Below
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Tool Style Flail High Speed Teeth Carbit Tipped Bolt In Carbit Tipped Bolt In Carbit Tipped Bolt In Carbit Tapper Fit Carbit Tapper Fit Double Tipped
Number of cutters 30 60 104 126 160 78 94 38
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 17.25" 17.25" 18.5"
Rotor Weight (with tools) 125 lbs 230 lbs 480 lbs 575 lbs 700 lbs 800 lbs 930 lbs 860 lbs
System Protection Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief
Hydraulic Couplers Included Included Check with Dealer Check with Dealer Check with Dealer Not Included Not Included Not Included
Unit Shipping Weight 750 lbs 950 lbs 1491 lbs 2115 lbs 2266 lbs 2600 lbs 3150 lbs 2975 lbs
Model No. MS248 MS348 MS548 MS560 MS572 iSeries MS760 iSeries MS772 MS960
Path Width 60" 60" 62" 75" 87" 75" 84" 75"
Rotor Width 48" 48" 48" 60" 72" 60" 72" 60"
Minimum Engine HP 25 30 45 60 65 65 80 65
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Level to 2" Below Level to 2" Below
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Tool Style Flail High Speed Teeth Carbit Tipped Bolt In Carbit Tipped Bolt In Carbit Tipped Bolt In Carbit Tapper Fit Carbit Tapper Fit Double Tipped
Number of cutters 30 60 104 126 160 78 94 38
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 17.25" 17.25" 18.5"
Rotor Weight (with tools) 125 lbs 230 lbs 480 lbs 575 lbs 700 lbs 800 lbs 930 lbs 860 lbs
System Protection Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief Built-In Relief
Hydraulic Couplers Included Included Check with Dealer Check with Dealer Check with Dealer Not Included Not Included Not Included
Unit Shipping Weight 750 lbs 950 lbs 1491 lbs 2115 lbs 2266 lbs 2600 lbs 3150 lbs 2975 lbs

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

200 Series

MOTOR PSI CASE DRAIN 12 GPM 15 GPM 18 GPM 20 GPM
RPM 832 1060 1250 1390
200 Series Motor Standard Cup Teeth 2500
3000
3500
Not Important for Roller-Vane motors 0.25"
0.375"
0.375"
0.375"
0.5"
0.5"
0.5"
0.75"
0.75"
0.75"
1"
1"
RPM 832 1060 1250 1390
200 Series Motor Heavy Blade Teeth 2500
3000
3500
Not Important for Roller-Vane motors 0.5"
0.75"
0.75"
0.75"
1"
1"
1"
1.5"
1.5"
1.5"
2"
2"

Learn More About Case Drains

Learn More About Motor Types

300 Series

MOTOR PSI CASE DRAIN 12 GPM 15 GPM 18 GPM 20 GPM
RPM 832 1060 1250 1390
300 Series Motor 2500
3000
3500
Not Important for Roller-Vane motors 0.75"
1"
1"
1"
1.25"
1.25"
1.25"
1.5"
1.5"
2"
2.5"
2.5"

Learn More About Case Drains

Learn More About Motor Types

500 Series

MOTOR PSI CASE DRAIN 8
GPM
12
GPM
15
GPM
20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
55
GPM
60
GPM
RPM 555 832 1060 1390
A450 Roller-Vane 2500
3000
3500
Not Needed
Not Needed
Recommended
0.25"
0.5"
0.5"
0.75"
1"
1"
1"
1.25"
1.25"
1.5"
2"
2"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 640 846 1100 1370 1600
B550 Roller-Vane 2500
3000
3500
Not Needed
Recommended
Needed
--
--
--
0.25"
0.5"
0.5"
0.75"
1"
1"
1.25"
1.75"
1.75"
2.5"
3"
3"
3"
3.5"
3.5"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1090 1640 2050
C508 Bent Axis Piston 3000
3500
4000
Critical 1.5"
2"
2.5"
2.25"
2.75"
3.25"
2.75"
3.25"
4"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1190 1490 2000 2490
C510 Bent Axis Piston 3000
3500
4000
Critical --
--
--
2"
2.5"
3"
2.5"
3"
3.5"
3"
3.5"
4.5"
3.5"
4.5"
5"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1450 1800 2100
C530 Bent Axis Piston 3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
3"
3.5"
4.5"
4"
4.5"
5"
5"
5.5"
5.75"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C540 Bent Axis Piston 3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
3.75"
4.25"
4.75"
5.5"
5.75"
6"
6"
6.5"
7"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C550 Bent Axis Piston 3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
5"
5.5"
5.75"
6.5"
7"
7.5"
7"
7.5"
8"
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C570 Bent Axis Piston 3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
6"
6.5"
7"
5.5"
6"
6.5"
7"
7.5"
8"
7.5"
8"
8.5"
--
--
--
--
--
--
RPM 1400 1570 1750 1900
C590 Bent Axis Piston 3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
5"
5.5"
6"
7.5"
8"
9"
9"
9.5"
10"
9.5"
10"
11"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

700 Series

MOTOR PSI CASE DRAIN 20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
55
GPM
60
GPM
RPM 1450 1800 2100
C730
Bent Axis Piston
3000
3500
4000
Critical 3.5"
4"
5"
4.5"
5"
5.5"
5.5"
6"
6.5"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C740
Bent Axis Piston
3000
3500
4000
Critical --
--
--
4.25"
4.75"
5.25"
6"
6.25"
6.5"
6.5"
7"
7.5"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C750
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
5.5"
6"
6.25"
7"
7.5"
8"
7.5"
8"
8.5"
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C770
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
6.5"
7"
7.5"
6"
6.5"
7"
7.5"
8"
8.5"
8"
8.5"
9"
--
--
--
--
--
--
RPM 1400 1570 1750 1900
C790
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
5.5"
6"
6.5"
8"
8.5"
9.5"
9.5"
10"
10.5"
10"
10.5"
11.5"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

900 Series

MOTOR PSI CASE DRAIN 20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
RPM 1450 1800 2100
C930
Bent Axis Piston
3000
3500
4000
Critical 4"
4.5"
5.5"
5"
5.5"
6"
6"
6.5"
7"
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C940
Bent Axis Piston
3000
3500
4000
Critical --
--
--
4.75"
5.25"
5.75"
6.5"
6.75"
7"
7"
7.5"
8"
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C950
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
6"
6.5"
6.75"
7.5"
8"
8.5"
8"
8.5"
9"
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C970
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
6"
7.5"
8"
6.5"
7"
7.5"
8"
8.5"
9"
8.5"
9"
9.5"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

UNDERSTANDING MOTOR TYPES

HOW TO CHOOSE THE RIGHT HYDRAULIC MOTOR FOR YOUR BRUSH MULCHER

The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.

THREE TYPES OF MOTORS

Gear motors

GEAR MOTORS

Roller-vane gerotor motors

ROLLER-VANE GEROTOR MOTORS

Bent axis piston motors

BENT AXIS PISTON MOTORS

Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of November 15, 2019 5:58 PM EST

UPCOMING PUBLIC HOLIDAYS

Date Description

MULCHERS

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
FMM1482929MTB1 pro-type in stock
MP2488989NEED TO DESIGN
FMS2601111
FMS2801111MTB
MP348Stock9
MP36029
MP54899
MP56035
MP572310
iMP772313
MS2482424
MS348Stock9
MS54824
MS56024
MS57299
iMS76029
iMS77299MTB
MS9602929
MX230211
MX33029MTB
MX330G3434Gear Motor Model 20% more efficient
MX53024
MX530R1717
MX54844MTB
MX548R1414
iMX74829
iMX748R1414
iMX7608484MTB

PUBLIC HOLIDAYS

Date Description