PUT SOME

TEETH

INTO IT

MP360 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 300 series is our most light weight fixed tooth brush mulcher for 3-point hitch tractors. With low ground speed the MP360 Brush Fire brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier.
The direct drive of a brush mulcher on the PTO of a tractor is the most efficient way to run a brush mulcher and if you check our brush cutting size charts you will see that the slower you can travel the bigger material you can handle.

Integrated brush bar

When push comes to shove the integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated brush bar

Integrated skid shoes

These durable skid shoes help the Brush Fire to better float over the ground for optimal mulching action.

Integrated skid shoes

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

Hardened Tooth Holders

Designed to handle the punishment, these heavy-duty teeth holders resist bending and keep you on the path of destruction longer.

Hardened tooth holders

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip ClUtch

To protect the gearbox and drive sytem, BrushFire comes with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

Reinforced Belt

A heavy duty reinforced belt delivers the force from the gear box to the rotor. Not only does this belt refuse to back down in the face of dense brush, it also offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powdered coated

Integrated brush bar

When push comes to shove the integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated brush bar

Integrated skid shoes

These durable skid shoes help the Brush Fire to better float over the ground for optimal mulching action.

Integrated skid shoes

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

Hardened Tooth Holders

Designed to handle the punishment, these heavy-duty teeth holders resist bending and keep you on the path of destruction longer.

Hardened tooth holders

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip ClUtch

To protect the gearbox and drive sytem, BrushFire comes with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

Reinforced Belt

A heavy duty reinforced belt delivers the force from the gear box to the rotor. Not only does this belt refuse to back down in the face of dense brush, it also offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powdered coated

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS



Model No. MP348 MP360 MP548 MP560 MP572 iSeries MP772 Large Shaft to up the HP
Path Width 60" 72" 62" 75" 87" 84" D002134
Rotor Width 48" 60" 48" 60" 72" 72"
Maximum Engine HP 50 55 75 75 125 135 90 - 155 PTO Hp
Minimum Engine HP 25 30 40 45 50 90
Maximum PTO HP 40 45 65 65 115 125 Do not exceed 165 Engine Hp
Cutting Depth Level Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 4" Below
Cutting Style High Speed Teeth High Speed Teeth Carblt Tipped Bolt-In Carblt Tipped Bolt-In Carblt Tipped Bolt-In Carblt Tapper Fit
Number of Cutters 60 74 104 126 160 94
Rotor Shaft Size 2" 2" 2" 2" 2" 2.5"
Rotor Diameter (tool tips) 15" 15" 15" 15" 15" 17.25"
Rotor Weight (with tools) 230 lbs 315 lbs 480 lbs 575 lbs 700 lbs 930 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 CAT 2 or 3
Drive Speed 540 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110) 540(Max Engine HP 110)
Gearbox Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch
Unit Weight 1050 lbs 1200 lbs 1600 lbs 2145 lbs 2500 lbs 4558 lbs
Model No. MP348 MP360 MP548 MP560 MP572 iSeries MP772 Large Shaft to up the HP
Path Width 60" 72" 62" 75" 87" 84" D002134
Rotor Width 48" 60" 48" 60" 72" 72"
Maximum Engine HP 50 55 75 75 125 135 90 - 155 PTO Hp
Minimum Engine HP 25 30 40 45 50 90
Maximum PTO HP 40 45 65 65 115 125 Do not exceed 165 Engine Hp
Cutting Depth Level Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 4" Below
Cutting Style High Speed Teeth High Speed Teeth Carblt Tipped Bolt-In Carblt Tipped Bolt-In Carblt Tipped Bolt-In Carblt Tapper Fit
Number of Cutters 60 74 104 126 160 94
Rotor Shaft Size 2" 2" 2" 2" 2" 2.5"
Rotor Diameter (tool tips) 15" 15" 15" 15" 15" 17.25"
Rotor Weight (with tools) 230 lbs 315 lbs 480 lbs 575 lbs 700 lbs 930 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 CAT 2 or 3
Drive Speed 540 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110) 540(Max Engine HP 110)
Gearbox Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch
Unit Weight 1050 lbs 1200 lbs 1600 lbs 2145 lbs 2500 lbs 4558 lbs

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

300 Series

MODEL TRACTOR SPEED RPM 25 HP 30 HP 40 HP 55 HP
300 Series
Low Gear Slow Reverse 1800 0.5" 1" 1.5" 2"
Low Gear Stop & Chew 1" 1.5" 2" 2.5"
Hydrostatic Slow Reverse 1.5" 2" 2.5" 3"
Hydrostatic Stop & Chew 2" 3" 4" 5"

500 Series

MODEL TRACTOR SPEED RPM 45 HP 50 HP 60 HP 65 HP 68 HP 75 HP 100 HP 125 HP
MP548 / MP560 Low Gear
Creeper
Hydrostatic
1800 1"
2"
3"
1.5"
2.5"
4"
2"
3"
5"
--
--
--
2.5"
4"
6"
--
--
--
--
--
--
--
--
--
MP572 Low Gear
Creeper
Hydrostatic
1800 --
--
--
--
--
--
--
--
--
2.5"
4"
6"
--
--
--
3"
5"
8"
3.5"
6"
10"
4"
7"
12"

700 Series

MODEL TRACTOR SPEED RPM 100 HP 125 HP 150 HP
iMP772 Low Gear
Creeper
Hydrostatic
1800 5"
7"
11"
7"
8"
13"
8"
10"
15"
logo
logo
Updated as of January 28, 2020 2:29 AM EST

UPCOMING PUBLIC HOLIDAYS

Date Description

MULCHERS

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
FMM1483636MTB1 pro-type in stock
MP2489696NEED TO DESIGN
FMS2601818
FMS2801818MTB
MP3481116
MP360916
MP5481616
MP5601212
MP5721017Extended Lead Time for 540RPM Option
iMP7721020Extended Lead Time for 540RPM Option
MS2483131
MS348Stock16
MS5481111
MS560911
MS5721616
iMS760915
iMS7721616MTB
MS9603535
MX230918
MX330916MTB
MX330G4141Gear Motor Model 20% more efficient
MX5301111
MX530R2424
MX548911MTB
MX548R2121
iMX748916
iMX748R2121
iMX7609191MTB

PUBLIC HOLIDAYS

Date Description
2020-02-17Family Day
2020-04-10Good Friday
2020-05-18Victoria Day
2020-07-01Canada Day
2020-08-03Civic Holiday
2020-09-07Labour Day
2020-10-12Thanksgiving
2020-12-25Christmas Day
2020-12-26Boxing Day