PUT SOME

TEETH

INTO IT

MX960R Fixed Tooth Mulcher for Excavator, 18-33 Ton

The Baumalight MX960R Brush Mulcher has a 60” rotor and is designed for excavators starting at 18 ton up to 33 tons. The MX960R uses a fixed tooth holder comes with heavy duty double carbit tipped teeth (R9000), these teeth are ideal for vegetation management with lots of ground contact and don’t mind the occasional stone. Powered by a piston motor like all of the larger Baumalight mulchers the MX960R comes with aggressive root rake ripper teeth build into the frame to rip out rocks and move logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel and is equipped with replaceable body wear plates.

Free Teeth Promo

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

REPLACEABLE BOLT-IN LINER

Save time by easily replacing the AR400 steel wear plates on the MX960R without needing to remove the rotor.

Replaceable bolt in wear plates

ADJUSTABLE BELT TENSIONER

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

Adjustable belt tensioner

OPTIONAL TWO-SPEED MOTOR

To maximize the rotor speed and torque to account for changing mulching material, the MX960R is available with a variable two-speed motor option.

BENT AXIS PISTON MOTORS ARE A STANDARD OPTION

Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.

Bent axis piston motor

WIRE PROTECTION KIT

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

Wire protection kit

CHAIN CURTAIN

The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits.

Chain curtain

6 FREE TEETH

All MX960R Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment.

6 free teeth

EASY ACCESS GREASE FITTINGS

Reduce your regular maintenance time by easily greasing the bearings on the MX960R from outside the frame. No tools required.

Easy access grease fittings

OVERTORQUE PROTECTION - RELIEF VALVE

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

Overtorque protection relief valve

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Hydraulic Flow & Pressure Database

For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.

Click here for details.

Hydraulic flow pressure

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model No. MX230 MX330 MX530 MX530R MX548 MX548R MX948R MX960R MX1160R
Baumalight Connection Code A02 A02 A02 A02 A03 A03 A03 A03 A03
Path Width 38" 38" 40" 40" 62" 62" 70" 90" 90"
Rotor Width 30" 30" 30" 30" 48" 48" 48" 60" 60"
Maximum Carrier Ton 6 8 12 12 20 20 30 33 33
Minimum Carrier Ton 2 3 4 4 6 7 12 18 18
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level Level Level
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Cutting Style Flall High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped Carbide Double Tipped Carbide Sharpenable Planer teeth
Tooth Part number F2000 H3000 S1000 S1000 P5000 P5000 R9000 R9000 P11000
Number of Cutters 22 36 64 64 104 104 27 38 31
Rotor Shaft Size 1.5" 2" 2" 2" 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 15" 18.5" 18.5" 18.5"
Rotor Weight (with tools) 125 lbs 175 lbs 300 lbs 300 lbs 408 lbs 408 lbs 617 lbs 860 lbs 872 lbs
No. of Motor 1 1 1 1 1 1 1 1 1
System Protection Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef
Unit Weight 500 lbs 750 lbs 1036 lbs 1166 lbs 2167 lbs 2167 lbs 2838 lbs 2910 lbs 2925 lbs

Model No. MX230 MX330 MX530 MX530R MX548 MX548R MX948R MX960R MX1160R
Baumalight Connection Code A02 A02 A02 A02 A03 A03 A03 A03 A03
Path Width 38" 38" 40" 40" 62" 62" 70" 90" 90"
Rotor Width 30" 30" 30" 30" 48" 48" 48" 60" 60"
Maximum Carrier Ton 6 8 12 12 20 20 30 33 33
Minimum Carrier Ton 2 3 4 4 6 7 12 18 18
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level Level Level
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Cutting Style Flall High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped Carbide Double Tipped Carbide Sharpenable Planer teeth
Tooth Part number F2000 H3000 S1000 S1000 P5000 P5000 R9000 R9000 P11000
Number of Cutters 22 36 64 64 104 104 27 38 31
Rotor Shaft Size 1.5" 2" 2" 2" 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 15" 18.5" 18.5" 18.5"
Rotor Weight (with tools) 125 lbs 175 lbs 300 lbs 300 lbs 408 lbs 408 lbs 617 lbs 860 lbs 872 lbs
No. of Motor 1 1 1 1 1 1 1 1 1
System Protection Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef
Unit Weight 500 lbs 750 lbs 1036 lbs 1166 lbs 2167 lbs 2167 lbs 2838 lbs 2910 lbs 2925 lbs

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

900 Series

MOTOR PSI CASE DRAIN 20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
55
GPM
60
GPM
65
GPM
70
GPM
75
GPM
RPM 1450 1800 2100
C930
Bent Axis Piston
2500
3000
3500
4000
Critical 3.5"
4"
4.5"
5.5"
4.5"
5"
5.5"
6"
5.5"
6"
6.5"
7"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C940
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
4.25"
4.75"
5.25"
5.75"
6.25"
6.5"
6.75"
7"
6.5"
7"
7.5"
8"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C950
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
5.5"
6"
6.5"
6.75"
7"
7.5"
8"
8.5"
7.5"
8"
8.5"
9"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C970
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
5.5"
6"
7.5"
8"
6"
6.5"
7"
7.5"
7.5"
8"
8.5"
9"
8"
8.5"
9"
9.5"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1570 1750 1900
C990
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
6"
6.5"
7"
8.5"
9"
10"
10"
10.5"
11"
10.5"
11"
12"
--
--
--
--
--
--
--
--
--
--
--
--
RPM Adjustable
D97X2
Two speed
2500
3000
3500
4000
Critical 4.25"
5"
5.5"
6.75"
5.5"
6.25"
6.75"
7.5"
7.75"
8"
8.5"
8.75"
8.75"
9.25"
10"
10.5"
9.25"
10"
10.5"
11.25"
10.25"
11"
11.5"
12.25"
11.25"
12"
12.5"
13.25"
12.25"
13"
13.5"
14.25"
13.25"
14"
14.5"
15.25"
14.25"
15"
15.5"
16.25"
15.25"
16"
16.5"
17.25"
16.25"
17"
17.5"
18.25"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

1100 Series

MOTOR PSI CASE DRAIN 20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
55
GPM
60
GPM
65
GPM
70
GPM
75
GPM
RPM 1450 1800 2100
C1130
Bent Axis Piston
2500
3000
3500
4000
Critical 4.5"
5"
5.5"
6.5"
5.5"
6"
6.5"
7"
6.5"
7"
7.5"
8"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C1140
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
6.25"
6.75"
7.25"
7.75"
8.25"
8.5"
8.75"
9"
8.5"
9"
9.5"
10"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C1150
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
8.5"
9"
9.5"
9.75"
10"
10.5"
11"
11.5"
10.5"
11"
11.5"
12"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C1170
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
9.5"
10"
11.5"
12"
10"
10.5"
11"
11.5"
11.5"
12"
12.5"
13"
12"
12.5"
13"
13.5"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1570 1750 1900
C1190
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
10"
10.5"
11"
11.5"
12.5"
13"
13.5"
14.5"
14"
14.5"
15"
15.5"
14.5"
15"
15.5"
16.5"
--
--
--
--
--
--
--
--
--
--
--
--
RPM Adjustable
D117X2
Two speed
2500
3000
3500
4000
Critical 5.5"
6.25"
6.75"
8"
7.75"
8.25"
9"
9.5"
10.5"
11.25"
11.5"
12"
12.5"
13"
13.5"
14.25"
13"
13.75"
14.25"
15"
14.25"
15"
15.5"
16.25"
15.5"
16.25"
16.75"
18"
17.5"
18"
18.75"
19.25"
18"
18.75"
19.25"
20.5"
19"
19.75"
20.25"
21.5"
20"
20.75"
21.25"
22.5"
21"
21.75"
22.25"
23.5"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

UNDERSTANDING MOTOR TYPES

<>

HOW TO CHOOSE THE RIGHT HYDRAULIC MOTOR FOR YOUR BRUSH MULCHER

The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.

THREE TYPES OF MOTORS

Gear motors

GEAR MOTORS

Roller-vane gerotor motors

ROLLER-VANE GEROTOR MOTORS

Bent axis piston motors

BENT AXIS PISTON MOTORS

Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of May 20, 2022 11:59 AM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description
2022-05-23Victoria Day

Lead time for MX960R

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
MX960R1257

Lead time for other Mulchers

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
MP348Stock23
MP3602323
MP560Stock33
MP5722%Stock40MTB2% on 1000 rpm floor model1,000 rpm - Floor model BL1006856
MP972Stock55Stock w/1,000 rpm gearbox
MS348326
MS5482323
MS5601045
MS560-C510Stock41
MS560-C530Stock41
MS560-C5401053
MS560-C5501053
MS572649
MS572-C540Stock49
MS572-C550649
MS960649
MS960-C940Stock19
MS960-C950Stock19
MS960-D97X26492 speed motor
MS972649
MS972-C950649
MS972-D97X26492 speed motor
MS11601053
MS1160-C11501053
MS1160-D117X214572 speed motor
MX230-F2000Stock21
MX230-F3000346
MX330Stock46MTBStock unit w/o mount
MX5301313
MX530-C510Stock13Stock unit w/o mount
MX530R3846
MX530R-C510Stock46Stock unit w/o mount
MX5484747
MX548R5555
MX948R4553
MX960R1257
MX1160R5555

PUBLIC HOLIDAYS

Date Description
2022-07-01Canada day
2022-09-05Labour Day