PUT SOME

TEETH

INTO IT

MX948R Fixed Tooth Mulcher for Excavator Starting at 12 Tons

The Baumalight MX948R Brush Mulcher has a 48” rotor and is designed for excavators starting at 12 tons. With a 70” path, the MX948R uses a fixed tooth holder and has 27 heavy duty double carbide tipped teeth (R9000) that are ideal for clearing heavy brush and trees. The MX948R comes with aggressive root rake teeth that are built into the frame. The root rake is perfect for ripping out rocks and moving logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel and is equipped with replaceable body wear plates.

Free Teeth Promo

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

REPLACEABLE BOLT-IN LINER

Save time by easily replacing the AR400 steel wear plates on the MX948R without needing to remove the rotor.

Replaceable bolt in wear plates

ADJUSTABLE BELT TENSIONER

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

Adjustable belt tensioner

OPTIONAL TWO-SPEED MOTOR

To maximize the rotor speed and torque to account for changing mulching material, the MX948R is available with a variable two-speed motor option.

Optional two speed motor

BENT AXIS PISTON MOTORS ARE A STANDARD OPTION

Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.

Bent axis piston motor

CASE DRAIN – VENT TO ATMOSPHERE

To prevent pressure relief activation on the motor seal, the MX948R comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. To learn more CLICK HERE about the case drain line.

Case drain burst disk

WIRE PROTECTION KIT

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

Wire protection kit

CHAIN CURTAIN

The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits.

Chain curtain

ROOT RAKE

The MX948R is equipped with a root rake for pushing rocks, fallen logs or other debris out of the way.

Root rake

6 FREE TEETH

All MX948R Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be conveniently stored in the enclosed spare tool compartment.

6 free teeth

EASY ACCESS GREASE FITTINGS

Reduce your regular maintenance time by easily greasing the bearings on the MX948R from outside the frame. No tools required.

Easy access grease fittings

OVERTORQUE PROTECTION - RELIEF VALVE

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

Overtorque protection relief valve

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

POWDERED COATED

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coat

Hydraulic Flow & Pressure Database

For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.

Click here for details.

Hydraulic flow pressure

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model No. MX230 MX330 MX530 MX530R MX548 MX548R MX948R MX960R MX1160R
Baumalight Connection Code A02 A02 A02 A02 A03 A03 A03 A03 A03
Path Width 38" 38" 40" 40" 62" 62" 70" 90" 90"
Rotor Width 30" 30" 30" 30" 48" 48" 48" 60" 60"
Maximum Carrier Ton 6 8 12 12 20 20 30 33 33
Minimum Carrier Ton 2 3 4 4 8 8 12 18 18
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level Standard level – Optional skid shoes for below ground Standard level – Optional skid shoes for below ground
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Cutting Style Flall High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped Carbide Double Tipped Carbide Sharpenable Planer teeth
Number of Cutters 22 36 64 64 104 104 27 38 31
Rotor Shaft Size 1.5" 2" 2" 2" 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 15" 18.5" 18.5" 18.5"
Rotor Weight (with tools) 125 lbs 175 lbs 300 lbs 300 lbs 408 lbs 408 lbs 617 lbs 860 lbs 872 lbs
No. of Motor 1 1 1 1 1 1 1 1 1
System Protection Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef
Unit Weight 500 lbs 750 lbs 1036 lbs 1166 lbs 2167 lbs 2167 lbs 2838 lbs 2910 lbs 2925 lbs

Model No. MX230 MX330 MX530 MX530R MX548 MX548R MX948R MX960R MX1160R
Baumalight Connection Code A02 A02 A02 A02 A03 A03 A03 A03 A03
Path Width 38" 38" 40" 40" 62" 62" 70" 90" 90"
Rotor Width 30" 30" 30" 30" 48" 48" 48" 60" 60"
Maximum Carrier Ton 6 8 12 12 20 20 30 33 33
Minimum Carrier Ton 2 3 4 4 8 8 12 18 18
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level Standard level – Optional skid shoes for below ground Standard level – Optional skid shoes for below ground
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Cutting Style Flall High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped Carbide Double Tipped Carbide Sharpenable Planer teeth
Number of Cutters 22 36 64 64 104 104 27 38 31
Rotor Shaft Size 1.5" 2" 2" 2" 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 15" 18.5" 18.5" 18.5"
Rotor Weight (with tools) 125 lbs 175 lbs 300 lbs 300 lbs 408 lbs 408 lbs 617 lbs 860 lbs 872 lbs
No. of Motor 1 1 1 1 1 1 1 1 1
System Protection Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef Built-In Rellef
Unit Weight 500 lbs 750 lbs 1036 lbs 1166 lbs 2167 lbs 2167 lbs 2838 lbs 2910 lbs 2925 lbs

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

900 Series

MOTOR PSI CASE DRAIN 20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
RPM 1450 1800 2100
C930
Bent Axis Piston
3000
3500
4000
Critical 4"
4.5"
5.5"
5"
5.5"
6"
6"
6.5"
7"
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C940
Bent Axis Piston
3000
3500
4000
Critical --
--
--
4.75"
5.25"
5.75"
6.5"
6.75"
7"
7"
7.5"
8"
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C950
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
6"
6.5"
6.75"
7.5"
8"
8.5"
8"
8.5"
9"
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C970
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
6"
7.5"
8"
6.5"
7"
7.5"
8"
8.5"
9"
8.5"
9"
9.5"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

1100 Series

MOTOR PSI CASE DRAIN 20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
55
GPM
60
GPM
RPM 1450 1800 2100
C1130
Bent Axis Piston
3000
3500
4000
Critical 5"
5.5"
6.5"
6"
6.5"
7"
7"
7.5"
8"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C1140
Bent Axis Piston
3000
3500
4000
Critical --
--
--
6.75"
7.25"
7.75"
8.5"
8.75"
9"
9"
9.5"
10"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C1150
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
9"
9.5"
9.75"
10.5"
11"
11.5"
11"
11.5"
12"
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C1170
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
10"
11.5"
12"
10.5"
11"
11.5"
12"
12.5"
13"
12.5"
13"
13.5"
--
--
--
--
--
--
RPM 1400 1570 1750 1900
C1190
Bent Axis Piston
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
10.5"
11"
11.5"
13"
13.5"
14.5"
14.5"
15"
15.5"
15"
15.5"
16.5"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

UNDERSTANDING MOTOR TYPES

<>

HOW TO CHOOSE THE RIGHT HYDRAULIC MOTOR FOR YOUR BRUSH MULCHER

The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.

THREE TYPES OF MOTORS

Gear motors

GEAR MOTORS

Roller-vane gerotor motors

ROLLER-VANE GEROTOR MOTORS

Bent axis piston motors

BENT AXIS PISTON MOTORS

Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of September 24, 2021 4:10 PM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description

Lead time for MX948R

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
MX948R7474

Lead time for other Mulchers

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
MP3481428
MP3601428
MP548268268Discontinuing
MP560Stock60
MP5726270
MP9726969
MS248469469Not Taking New Orders at this Time
MS3481428
MS548531
MS560531
MS560-C510Stock29
MS560-C530Stock29
MS5723737
MS9603030Stock w/C950
MS960-C950Stock37
MS972337
MS1160337
MX2303543
MX3304048MTB
MX330G9494Gear Motor Model 20% more efficient
MX5304040
MX530R6969
MX5486161
MX548R7474
MX948R7474
MX960R7171
MX1160R6969

PUBLIC HOLIDAYS

Date Description
2021-10-01Closed for National Day for Truth and Reconciliation
2021-10-11Canadian Thanks giving