PUT SOME
TEETH
INTO IT
As with the standard iMX748, the iMX748R brush mulcher will efficiently mulch heavy brush and trees and is designed for contractors, rental and any other heavy duty mulching and land clearing. The difference is aggressive root rake teeth build into the frame to rip out rocks and move logs and has a heavier duty body build with AR400 steel that is the same weight but much stronger than mild steel. The standard 700 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the perfect general use tooth, their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 700 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. It’s flat profile however makes it vulnerable to shattering on impact with rocks and other debris. See our brush cutting size chart to see how much this excavator mounted forestry mulcher can process according to your hydraulic flow. With the build in control and precision of the excavator, mulching around objects is not a problem, whether it’s in a ditch or overhead.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.
Unique to the 700 Series teeth is the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.
Heavy-duty teeth holders resist bending and keep you working longer.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The MX530R, MX548R and iMX748R are equipped with a root rake for pushing fallen logs or other debris out of the way. The MX548R and iMX748R utilize replaceable bucket-style scrapper teeth.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.
Unique to the 700 Series teeth is the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.
Heavy-duty teeth holders resist bending and keep you working longer.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The MX530R, MX548R and iMX748R are equipped with a root rake for pushing fallen logs or other debris out of the way. The MX548R and iMX748R utilize replaceable bucket-style scrapper teeth.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Baumalight mulchers use an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
Model No. | MX230 | MX330 | MX530 | MX530R | MX548R | MX948R | MX960R | MX1160R |
---|---|---|---|---|---|---|---|---|
Baumalight Connection Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 |
Path Width | 38" | 38" | 40" | 40" | 62" | 70" | 90" | 90" |
Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 60" | 60" |
Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 30 | 33 | 33 |
Minimum Carrier Ton | 2 | 3 | 4 | 4 | 7 | 12 | 18 | 18 |
Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level |
Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Double Tipped Carbide | Double Tipped Carbide | Sharpenable Planer teeth |
Tooth Part number | F2000 | H3000 | P5000 | P5000 | P5000 | R9000 | R9000 | P11000 |
Number of Cutters | - | - | 64 | 64 | 104 | - | - | - |
Number of cutters (if shipped with new spiral tooth pattern) | 22 | 36 | 44 | 44 | 72 | 27 | 38 | 31 |
Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2" | 2" |
Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 18.5" | 18.5" | 18.5" |
Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 617 lbs | 860 lbs | 872 lbs |
No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Case Drain | Not important | Not important | See motor options | See motor options | Critical | Critical | Critical | Critical |
Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 1166 lbs | 2167 lbs | 2838 lbs | 2910 lbs | 2925 lbs |
Model No. | MX230 | MX330 | MX530 | MX530R | MX548R | MX948R | MX960R | MX1160R |
---|---|---|---|---|---|---|---|---|
Baumalight Connection Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 |
Path Width | 38" | 38" | 40" | 40" | 62" | 70" | 90" | 90" |
Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 60" | 60" |
Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 30 | 33 | 33 |
Minimum Carrier Ton | 2 | 3 | 4 | 4 | 7 | 12 | 18 | 18 |
Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level |
Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Double Tipped Carbide | Double Tipped Carbide | Sharpenable Planer teeth |
Tooth Part number | F2000 | H3000 | P5000 | P5000 | P5000 | R9000 | R9000 | P11000 |
Number of Cutters | - | - | 64 | 64 | 104 | - | - | - |
Number of cutters (if shipped with new spiral tooth pattern) | 22 | 36 | 44 | 44 | 72 | 27 | 38 | 31 |
Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2" | 2" |
Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 18.5" | 18.5" | 18.5" |
Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 617 lbs | 860 lbs | 872 lbs |
No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Case Drain | Not important | Not important | See motor options | See motor options | Critical | Critical | Critical | Critical |
Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 1166 lbs | 2167 lbs | 2838 lbs | 2910 lbs | 2925 lbs |
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C730 Bent Axis Piston |
3000 3500 4000 |
Critical | 3.5" 4" 5" |
4.5" 5" 5.5" |
5.5" 6" 6.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1500 | 1800 | 2100 | ||||||||
C740 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.25" 4.75" 5.25" |
6" 6.25" 6.5" |
6.5" 7" 7.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1600 | 1875 | 2140 | ||||||||
C750 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
5.5" 6" 6.25" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C770 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6.5" 7" 7.5" |
6" 6.5" 7" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C790 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5.5" 6" 6.5" |
8" 8.5" 9.5" |
9.5" 10" 10.5" |
10" 10.5" 11.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||
C930 Bent Axis Piston |
3000 3500 4000 |
Critical | 4" 4.5" 5.5" |
5" 5.5" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1500 | 1800 | 2100 | ||||||
C940 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.75" 5.25" 5.75" |
6.5" 6.75" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1600 | 1875 | 2140 | ||||||
C950 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
6" 6.5" 6.75" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
RPM | 1400 | 1630 | 1830 | 2030 | |||||
C970 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6" 7.5" 8" |
6.5" 7" 7.5" |
8" 8.5" 9" |
8.5" 9" 9.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
---|---|---|---|---|---|---|---|---|---|---|---|
RPM | 1450 | 1800 | 2100 | ||||||||
C1130 Bent Axis Piston |
3000 3500 4000 |
Critical | 5" 5.5" 6.5" |
6" 6.5" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1500 | 1800 | 2100 | ||||||||
C1140 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
6.75" 7.25" 7.75" |
8.5" 8.75" 9" |
9" 9.5" 10" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1600 | 1875 | 2140 | ||||||||
C1150 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
9" 9.5" 9.75" |
10.5" 11" 11.5" |
11" 11.5" 12" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
RPM | 1400 | 1630 | 1830 | 2030 | |||||||
C1170 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
10" 11.5" 12" |
10.5" 11" 11.5" |
12" 12.5" 13" |
12.5" 13" 13.5" |
-- -- -- |
-- -- -- |
RPM | 1400 | 1570 | 1750 | 1900 | |||||||
C1190 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
10.5" 11" 11.5" |
13" 13.5" 14.5" |
14.5" 15" 15.5" |
15" 15.5" 16.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.
GEAR MOTORS
ROLLER-VANE GEROTOR MOTORS
BENT AXIS PISTON MOTORS
Date | Description |
---|---|
2024-03-29 | Good Friday |
Model Number | Discount Available | Lead time to build first order | Lead time to build next order | Location | Notes | Discount Description |
---|
Model Number | Discount Available | Lead time to build first order | Lead time to build next order | Location | Notes | Discount Description |
---|---|---|---|---|---|---|
MP348-540 | ||||||
MP360-540 | ||||||
MP560-540 | ||||||
MP572-540 | ||||||
MP572-1000 | ||||||
MP972-540 | ||||||
MP972-1000 | ||||||
MS348-A450 | ||||||
MS548-A450 | ||||||
MS548-B550 | ||||||
MS548-C508 | ||||||
MS548-C510 | ||||||
MS548-C530 | ||||||
MS548-C540 | ||||||
MS548-C550 | ||||||
MS560-C508 | ||||||
MS560-C510 | ||||||
MS560-C530 | ||||||
MS560-C540 | ||||||
MS560-C550 | ||||||
MS572-C530 | ||||||
MS572-C540 | ||||||
MS572-C550 | ||||||
MS960-C930 | ||||||
MS960-C940 | ||||||
MS960-C950 | ||||||
MS960-D97X2 | 2 speed motor | |||||
MS972-C930 | ||||||
MS972-C940 | ||||||
MS972-C950 | ||||||
MS972-D97X2 | 2 speed motor | |||||
MS1160-C1130 | ||||||
MS1160-C1140 | ||||||
MS1160-C1150 | ||||||
MS1160-D117X2 | 2 speed motor | |||||
MX230-F2000 | End user to communicate with Menno | Extra discount for supplying action shot videos - End user must fill out https://baumalight.com/factorydiscounts/contact_us/ form to get started | ||||
MX230-F3000 | End user to communicate with Menno | Extra discount for supplying action shot videos - End user must fill out https://baumalight.com/factorydiscounts/contact_us/ form to get started | ||||
MX330-A450 | ||||||
MX530-A450 | ||||||
MX530-B550 | ||||||
MX530-C508 | Stock unit w/o mount | |||||
MX530-C510 | Stock unit w/o mount | |||||
MX530-C530 | ||||||
MX530-C540 | ||||||
MX530-C550 | ||||||
MX530R-C508 | ||||||
MX530R-C510 | ||||||
MX530R-C530 | ||||||
MX530R-C540 | ||||||
MX530R-C550 | ||||||
MX548R-C510 | ||||||
MX548R-C530 | ||||||
MX548R-C540 | ||||||
MX548R-C550 | ||||||
MX548R-C570 | ||||||
MX548R-C590 | ||||||
MX948R-C940 | ||||||
MX948R-C950 | ||||||
MX948R-C970 | ||||||
MX948R-C990 | ||||||
MX948R-D97X2 | 2 speed | |||||
MX960R-C940 | ||||||
MX960R-C950 | ||||||
MX960R-C970 | ||||||
MX960R-C990 | ||||||
MX960R-D97X2 | 2 speed | |||||
MX1160R-C1140 | ||||||
MX1160R-C1150 | ||||||
MX1160R-C1170 | ||||||
MX1160R-C1190 | ||||||
MX1160R-D117X2 | 2 speed |
Date | Description |
---|---|
2024-05-20 | Victoria Day |