PUT SOME
TEETH
INTO IT
PUT SOME
TEETH
INTO IT
Our 500 series fixed tooth brush mulcher for excavators are designed to maintain and clear fence lines on farms and entry level contractor work. The 500 series Baumalight brush mulchers will efficiently mulch heavy brush and small trees and are offered with two different type of teeth. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. See our brush cutting size chart to see what limb size this excavator mounted forestry mulcher can handle. With the build in control and precision of the excavator, mulching around objects is not a problem, whether it’s in a ditch or overhead.
These durable skid shoes help the Brush Fire to better float over the ground for optimal mulching action.
The force and impact of mulching bends the teeth. Our V-Notch teeth and hardened holders won’t let that happen. Held firmly in place to absorb impacts from multiple directions the V-Notch keeps the teeth chewing up the toughest brush.
Designed to handle the punishment, these heavy-duty teeth holders resist bending and keep you on the path of destruction longer.
The 500 Series teeth come in two brush hungry carbide tipped styles, Planer and Ripper. The Planer style teeth feed their appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.
The force and impact of mulching bends the teeth. Our V-Notch teeth and hardened holders won’t let that happen. Held firmly in place to absorb impacts from multiple directions the V-Notch keeps the teeth chewing up the toughest brush.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. Not only does this belt refuse to back down in the face of dense brush, it also offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
Selected Brushfire skidsteer models are compatible with the Skid Wing boom mower for skidsteer.
Learn more at http://baumalight.com/skid_wing/en/
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
The Brushfire uses an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
These durable skid shoes help the Brush Fire to better float over the ground for optimal mulching action.
The force and impact of mulching bends the teeth. Our V-Notch teeth and hardened holders won’t let that happen. Held firmly in place to absorb impacts from multiple directions the V-Notch keeps the teeth chewing up the toughest brush.
Designed to handle the punishment, these heavy-duty teeth holders resist bending and keep you on the path of destruction longer.
The 500 Series teeth come in two brush hungry carbide tipped styles, Planer and Ripper. The Planer style teeth feed their appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.
The force and impact of mulching bends the teeth. Our V-Notch teeth and hardened holders won’t let that happen. Held firmly in place to absorb impacts from multiple directions the V-Notch keeps the teeth chewing up the toughest brush.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. Not only does this belt refuse to back down in the face of dense brush, it also offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
Selected Brushfire skidsteer models are compatible with the Skid Wing boom mower for skidsteer.
Learn more at http://baumalight.com/skid_wing/en/
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
The Brushfire uses an overhung load adapter which is designed with tapered roller bearings to stand up to the rigors of heavy mulching.
There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.
| Model No. | MX230 | MX330 | MX530 | MX530R | MX548 | MX548R | iSeries MX748 | iSeries MX748R | iSeries MX760 | MX960R | MX1160R |
| Excavator Adaptor Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 | A03 | A03 | A03 |
| Path Width | 38" | 38" | 40" | 40" | 62" | 62" | 65" | 70" | 82" | 90" | 90" |
| Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 48" | 48" | 60" | 60" | 60" |
| Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 20 | 25 | 30 | 33 | 33 | 33 |
| Minimum Carrier Ton | 2 | 3 | 4 | 4 | 8 | 8 | 18 | 20 | 22 | 18 | 18 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit | Double Tipped Carbide | Sharpenable Planer teeth |
| Number of Cutters | 22 | 36 | 64 | 64 | 104 | 104 | 62 | 62 | 78 | 38 | 31 |
| Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2.5" | 2.5" | 2.5" | 2" | 2" |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 15" | 17.25" | 17.25" | 17.25" | 18.5" | 18.5" |
| Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 408 lbs | 670 lbs | 670 lbs | 800 lbs | 860 lbs | 872 lbs |
| No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||
| System Protection | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef |
| Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 2167 lbs | 2167 lbs | 3180 lbs | 3300 lbs | 2910 lbs | 2925 lbs |
| Model No. | MX230 | MX330 | MX530 | MX530R | MX548 | MX548R | iSeries MX748 | iSeries MX748R | iSeries MX760 | MX960R | MX1160R |
| Excavator Adaptor Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 | A03 | A03 | A03 |
| Path Width | 38" | 38" | 40" | 40" | 62" | 62" | 65" | 70" | 82" | 90" | 90" |
| Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 48" | 48" | 60" | 60" | 60" |
| Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 20 | 25 | 30 | 33 | 33 | 33 |
| Minimum Carrier Ton | 2 | 3 | 4 | 4 | 8 | 8 | 18 | 20 | 22 | 18 | 18 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Carbide Tapper Fit | Carbide Tapper Fit | Double Tipped Carbide | Sharpenable Planer teeth |
| Number of Cutters | 22 | 36 | 64 | 64 | 104 | 104 | 62 | 62 | 78 | 38 | 31 |
| Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2.5" | 2.5" | 2.5" | 2" | 2" |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 15" | 17.25" | 17.25" | 17.25" | 18.5" | 18.5" |
| Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 408 lbs | 670 lbs | 670 lbs | 800 lbs | 860 lbs | 872 lbs |
| No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||
| System Protection | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef | Built-In Rellef |
| Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 2167 lbs | 2167 lbs | 3180 lbs | 3300 lbs | 2910 lbs | 2925 lbs |
| MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 555 | 832 | 1060 | 1390 | ||||||||||
| A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1" 1.25" 1.25" |
1.5" 2" 2" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
| B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
-- -- -- |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1.25" 1.75" 1.75" |
2.5" 3" 3" |
3" 3.5" 3.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1090 | 1640 | 2050 | |||||||||||
| C508 Bent Axis Piston | 3000 3500 4000 |
Critical | 1.5" 2" 2.5" |
2.25" 2.75" 3.25" |
2.75" 3.25" 4" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
| C510 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
2" 2.5" 3" |
2.5" 3" 3.5" |
3" 3.5" 4.5" |
3.5" 4.5" 5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C530 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
3" 3.5" 4.5" |
4" 4.5" 5" |
5" 5.5" 5.75" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C540 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
3.75" 4.25" 4.75" |
5.5" 5.75" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C550 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5" 5.5" 5.75" |
6.5" 7" 7.5" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C570 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
6" 6.5" 7" |
5.5" 6" 6.5" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C590 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5" 5.5" 6" |
7.5" 8" 9" |
9" 9.5" 10" |
9.5" 10" 11" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||||
| C730 Bent Axis Piston |
3000 3500 4000 |
Critical | 3.5" 4" 5" |
4.5" 5" 5.5" |
5.5" 6" 6.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||||
| C740 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.25" 4.75" 5.25" |
6" 6.25" 6.5" |
6.5" 7" 7.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||||
| C750 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
5.5" 6" 6.25" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||||
| C770 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6.5" 7" 7.5" |
6" 6.5" 7" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | |||||||
| C790 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5.5" 6" 6.5" |
8" 8.5" 9.5" |
9.5" 10" 10.5" |
10" 10.5" 11.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||
| C930 Bent Axis Piston |
3000 3500 4000 |
Critical | 4" 4.5" 5.5" |
5" 5.5" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||
| C940 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.75" 5.25" 5.75" |
6.5" 6.75" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||
| C950 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
6" 6.5" 6.75" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||
| C970 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6" 7.5" 8" |
6.5" 7" 7.5" |
8" 8.5" 9" |
8.5" 9" 9.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||||
| C1130 Bent Axis Piston |
3000 3500 4000 |
Critical | 5" 5.5" 6.5" |
6" 6.5" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||||
| C1140 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
6.75" 7.25" 7.75" |
8.5" 8.75" 9" |
9" 9.5" 10" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||||
| C1150 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
9" 9.5" 9.75" |
10.5" 11" 11.5" |
11" 11.5" 12" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||||
| C1170 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
10" 11.5" 12" |
10.5" 11" 11.5" |
12" 12.5" 13" |
12.5" 13" 13.5" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | |||||||
| C1190 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
10.5" 11" 11.5" |
13" 13.5" 14.5" |
14.5" 15" 15.5" |
15" 15.5" 16.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.
GEAR MOTORS
ROLLER-VANE GEROTOR MOTORS
BENT AXIS PISTON MOTORS
| Date | Description |
|---|
| Model Number | Discount Available | Number of Business Days to build first order |
Number of Business Days to build next order |
Location | Notes | Discount Description |
|---|---|---|---|---|---|---|
| FMM148 | 36 | 36 | MTB | 1 pro-type in stock | ||
| FMS260 | 18 | 18 | ||||
| FMS280 | 18 | 18 | MTB | |||
| MP248 | 96 | 96 | NEED TO DESIGN | |||
| FMP260 | 45% | 16 | 16 | MTB | Pre-Production | List Price of $3,500.00 - Pre-Production |
| MP348 | 1 | 16 | Frame in stock with Baumalight holders. | |||
| MP360 | 11 | 16 | ||||
| MP548 | 16 | 16 | ||||
| MP560 | 10% | Stock | 15 | TX | Stock Unit (demo unit) in TX | Demo Unit |
| MP572 | Stock | 17 | FL | 1,000 RPM unit in stock in Florida | ||
| iMP772 | 17 | 17 | ||||
| MP972 | 91 | 91 | ||||
| MS248 | 331 | 331 | Not Taking New Orders at this Time | |||
| MS348 | 1 | 16 | ||||
| MS548 | 11 | 11 | ||||
| MS560 | 11 | 11 | ||||
| MS572 | 16 | 16 | ||||
| iMS760 | 11 | 16 | ||||
| iMS772 | 16 | 16 | MTB | |||
| MS960 | 11 | 16 | ||||
| MS972 | 16 | 16 | ||||
| MS1160 | 11 | 16 | ||||
| MX230 | 11 | 18 | ||||
| MX330 | 1 | 16 | MTB | Frame in stock with Baumalight holders. | ||
| MX330G | 41 | 41 | Gear Motor Model 20% more efficient | |||
| MX530 | 11 | 11 | ||||
| MX530R | 24 | 24 | ||||
| MX548 | 11 | 11 | MTB | |||
| MX548R | 21 | 21 | ||||
| iMX748 | 10% | 11 | 16 | Overstock Discount on New Unit Orders | Over stock discount | |
| iMX748R | 5% | 16 | 16 | Overstock Discount on New Unit Orders | Over stock Discount | |
| MX760R | 16 | 16 | Same frame will work for 900 & 1100 series | |||
| MX960R | 18 | 18 | ||||
| MX1160R | 16 | 16 |
| Date | Description |
|---|---|
| 2020-12-25 | Christmas Day |
| 2020-12-26 | Boxing Day |
