PUT SOME
TEETH
INTO IT
PUT SOME
TEETH
INTO IT
Our 300 series fixed tooth brush mulcher for excavators, with adequate flow, the MX330 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier. See our brush cutting size chart to see how much this home owner excavator mounted forestry mulcher can process. To verify motor options for maximum brush cutting sizes, you can visit the chart below. With the built-in control and precision of the excavator, mulching around objects is not a problem, whether it’s in a ditch or overhead. A relief valve is provided to protect the motor and the hydraulic systems from pressure spikes. When obstacle hits the relief valve, the valve is opened and the pressure is relieved. Integrated skid shoes are provided to help the brush mulcher to better float over the ground for optimal mulching action. A heavy-duty reinforced belt delivers the force from the gear box to the rotor. The rotor bearings are factory lubricated with a lithium or lithium complex base grease which is suitable for this application. A powder coating finish is provided to prevent the rusting.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.
CLICK THE VIDEO TO LEARN MORE
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.
Heavy-duty teeth holders resist bending and keep you working longer.
All MX330 Brush Mulchers comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in the owner’s manual tube bolted to the frame.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
Selected excavator mulcher models are compatible with the Pack Wing boom mower for tractors..
Learn more at http://baumalight.com/skid_wing/en/
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.
CLICK THE VIDEO TO LEARN MORE
These durable skid shoes help the Brush Mulcher to better float over the ground for optimal mulching action.
The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.
Heavy-duty teeth holders resist bending and keep you working longer.
All MX330 Brush Mulchers comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in the owner’s manual tube bolted to the frame.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Protective steel cover that prevents damage from wire fencing.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Couplers must be ordered separately as we do not supply hydraulic couplers with product due to the variety carrier specifications. Click the link below.
Selected excavator mulcher models are compatible with the Pack Wing boom mower for tractors..
Learn more at http://baumalight.com/skid_wing/en/
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.
| Model No. | MX230 | MX330 | MX530 | MX530R | MX548R | MX948R | MX960R | MX1160R |
|---|---|---|---|---|---|---|---|---|
| Baumalight Connection Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 |
| Path Width | 38" | 38" | 40" | 40" | 62" | 70" | 90" | 90" |
| Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 60" | 60" |
| Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 30 | 33 | 33 |
| Minimum Carrier Ton | 2 | 3 | 4 | 4 | 7 | 12 | 18 | 18 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Double Tipped Carbide | Double Tipped Carbide | Sharpenable Planer teeth |
| Tooth Part number | F2000 | H3000 | P5000 | P5000 | P5000 | R9000 | R9000 | P11000 |
| Number of Cutters | - | - | 64 | 64 | 104 | - | - | - |
| Number of cutters (if shipped with new spiral tooth pattern) | 22 | 36 | 44 | 44 | 72 | 27 | 38 | 31 |
| Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2" | 2" |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 18.5" | 18.5" | 18.5" |
| Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 617 lbs | 860 lbs | 872 lbs |
| No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Case Drain | Not important | Not important | See motor options | See motor options | Critical | Critical | Critical | Critical |
| Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 1166 lbs | 2167 lbs | 2838 lbs | 2910 lbs | 2925 lbs |
| Model No. | MX230 | MX330 | MX530 | MX530R | MX548R | MX948R | MX960R | MX1160R |
|---|---|---|---|---|---|---|---|---|
| Baumalight Connection Code | A02 | A02 | A02 | A02 | A03 | A03 | A03 | A03 |
| Path Width | 38" | 38" | 40" | 40" | 62" | 70" | 90" | 90" |
| Rotor Width | 30" | 30" | 30" | 30" | 48" | 48" | 60" | 60" |
| Maximum Carrier Ton | 6 | 8 | 12 | 12 | 20 | 30 | 33 | 33 |
| Minimum Carrier Ton | 2 | 3 | 4 | 4 | 7 | 12 | 18 | 18 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level | Level | Level |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Cutting Style | Flall | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Double Tipped Carbide | Double Tipped Carbide | Sharpenable Planer teeth |
| Tooth Part number | F2000 | H3000 | P5000 | P5000 | P5000 | R9000 | R9000 | P11000 |
| Number of Cutters | - | - | 64 | 64 | 104 | - | - | - |
| Number of cutters (if shipped with new spiral tooth pattern) | 22 | 36 | 44 | 44 | 72 | 27 | 38 | 31 |
| Rotor Shaft Size | 1.5" | 2" | 2" | 2" | 2" | 2" | 2" | 2" |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 18.5" | 18.5" | 18.5" |
| Rotor Weight (with tools) | 125 lbs | 175 lbs | 300 lbs | 300 lbs | 408 lbs | 617 lbs | 860 lbs | 872 lbs |
| No. of Motor | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Case Drain | Not important | Not important | See motor options | See motor options | Critical | Critical | Critical | Critical |
| Unit Weight | 500 lbs | 750 lbs | 1036 lbs | 1166 lbs | 2167 lbs | 2838 lbs | 2910 lbs | 2925 lbs |
| MOTOR | PSI | CASE DRAIN | 8 GPM | 10 GPM | 12 GPM | 15 GPM | 20 GPM |
|---|---|---|---|---|---|---|---|
| RPM | 555 | 749 | 832 | 1060 | 1390 | ||
| A450 300 Series Motor | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.25" 0.5" 0.5" |
0.675" 0.9" 0.9" |
0.75" 1" 1" |
1" 1.25" 1.25" |
1.5" 2" 2" |
| MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 555 | 832 | 1060 | 1390 | ||||||||||
| A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1" 1.25" 1.25" |
1.5" 2" 2" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
| B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
-- -- -- |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1.25" 1.75" 1.75" |
2.5" 3" 3" |
3" 3.5" 3.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1090 | 1640 | 2050 | |||||||||||
| C508 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | 1" 1.5" 2" 2.5" |
1.75" 2.25" 2.75" 3.25" |
2.25" 2.75" 3.25" 4" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
| C510 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | -- -- -- -- |
1.5" 2" 2.5" 3" |
2" 2.5" 3" 3.5" |
2.5" 3" 3.5" 4.5" |
3" 3.5" 4.5" 5" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C530 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
2.5" 3" 3.5" 4.5" |
3.5" 4" 4.5" 5" |
4.5" 5" 5.5" 5.75" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C540 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
3.25" 3.75" 4.25" 4.75" |
5" 5.5" 5.75" 6" |
5.5" 6" 6.5" 7" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C550 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
4.5" 5" 5.5" 5.75" |
6" 6.5" 7" 7.5" |
6.5" 7" 7.5" 8" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C570 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
5.5" 6" 6.5" 7" |
5" 5.5" 6" 6.5" |
6.5" 7" 7.5" 8" |
7" 7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C590 Bent Axis Piston | 2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
4.5" 5" 5.5" 6" |
7" 7.5" 8" 9" |
8.5" 9" 9.5" 10" |
9" 9.5" 10" 11" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
65 GPM |
70 GPM |
75 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C930 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | 3.5" 4" 4.5" 5.5" |
4.5" 5" 5.5" 6" |
5.5" 6" 6.5" 7" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C940 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | -- -- -- -- |
4.25" 4.75" 5.25" 5.75" |
6.25" 6.5" 6.75" 7" |
6.5" 7" 7.5" 8" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C950 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
5.5" 6" 6.5" 6.75" |
7" 7.5" 8" 8.5" |
7.5" 8" 8.5" 9" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C970 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
5.5" 6" 7.5" 8" |
6" 6.5" 7" 7.5" |
7.5" 8" 8.5" 9" |
8" 8.5" 9" 9.5" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C990 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
6" 6.5" 7" |
8.5" 9" 10" |
10" 10.5" 11" |
10.5" 11" 12" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | Adjustable | |||||||||||||
| D97X2 Two speed |
2500 3000 3500 4000 |
Critical | 4.25" 5" 5.5" 6.75" |
5.5" 6.25" 6.75" 7.5" |
7.75" 8" 8.5" 8.75" |
8.75" 9.25" 10" 10.5" |
9.25" 10" 10.5" 11.25" |
10.25" 11" 11.5" 12.25" |
11.25" 12" 12.5" 13.25" |
12.25" 13" 13.5" 14.25" |
13.25" 14" 14.5" 15.25" |
14.25" 15" 15.5" 16.25" |
15.25" 16" 16.5" 17.25" |
16.25" 17" 17.5" 18.25" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
65 GPM |
70 GPM |
75 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C1130 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | 4.5" 5" 5.5" 6.5" |
5.5" 6" 6.5" 7" |
6.5" 7" 7.5" 8" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C1140 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | -- -- -- -- |
6.25" 6.75" 7.25" 7.75" |
8.25" 8.5" 8.75" 9" |
8.5" 9" 9.5" 10" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C1150 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
8.5" 9" 9.5" 9.75" |
10" 10.5" 11" 11.5" |
10.5" 11" 11.5" 12" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C1170 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
9.5" 10" 11.5" 12" |
10" 10.5" 11" 11.5" |
11.5" 12" 12.5" 13" |
12" 12.5" 13" 13.5" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C1190 Bent Axis Piston |
2500 3000 3500 4000 |
Critical | -- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
10" 10.5" 11" 11.5" |
12.5" 13" 13.5" 14.5" |
14" 14.5" 15" 15.5" |
14.5" 15" 15.5" 16.5" |
-- -- -- -- |
-- -- -- -- |
-- -- -- -- |
| RPM | Adjustable | |||||||||||||
| D117X2 Two speed |
2500 3000 3500 4000 |
Critical | 5.5" 6.25" 6.75" 8" |
7.75" 8.25" 9" 9.5" |
10.5" 11.25" 11.5" 12" |
12.5" 13" 13.5" 14.25" |
13" 13.75" 14.25" 15" |
14.25" 15" 15.5" 16.25" |
15.5" 16.25" 16.75" 18" |
17.5" 18" 18.75" 19.25" |
18" 18.75" 19.25" 20.5" |
19" 19.75" 20.25" 21.5" |
20" 20.75" 21.25" 22.5" |
21" 21.75" 22.25" 23.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.
GEAR MOTORS
ROLLER-VANE GEROTOR MOTORS
BENT AXIS PISTON MOTORS
| Date | Description |
|---|
| Model Number | Discount Available | Lead time to build first order | Lead time to build next order | Location | Notes | Discount Description |
|---|---|---|---|---|---|---|
| MP348-540 | ||||||
| MP360-540 | ||||||
| MP560-540 | ||||||
| MP572-540 | ||||||
| MP572-1000 | ||||||
| MP972-540 | ||||||
| MP972-1000 | ||||||
| MS348-A450 | ||||||
| MS548 | ||||||
| MS548-C510 | ||||||
| MS548-C530 | ||||||
| MS560 | ||||||
| MS560-C510 | ||||||
| MS560-C530 | ||||||
| MS560-C540 | ||||||
| MS560-C550 | ||||||
| MS572 | ||||||
| MS572-C530 | ||||||
| MS572-C540 | ||||||
| MS572-C550 | ||||||
| MS960 | ||||||
| MS960-C940 | ||||||
| MS960-C950 | ||||||
| MS960-D97X2 | 2 speed motor | |||||
| MS972 | ||||||
| MS972-C940 | ||||||
| MS972-C950 | ||||||
| MS972-D97X2 | 2 speed motor | |||||
| MS1160 | ||||||
| MS1160-C1150 | ||||||
| MS1160-D117X2 | 2 speed motor | |||||
| MX230-F2000 | 30% on purchase plus cash back | Extra discount for supplying action shot videos | ||||
| MX230-F3000 | 30% on purchase plus cash back | Extra discount for supplying action shot videos | ||||
| MX330-A450 | ||||||
| MX530 | ||||||
| MX530-C508 | ||||||
| MX530-C510 | Stock unit w/o mount | |||||
| MX530-C530 | Stock unit w/o mount | |||||
| MX530R | ||||||
| MX530R-C510 | Stock unit w/o mount | |||||
| MX530R-C530 | Stock unit w/o mount | |||||
| MX548R | ||||||
| MX948R | ||||||
| MX960R | ||||||
| MX1160R |
| Date | Description |
|---|---|
| 2023-07-03 | Canada Day |
| 2023-08-07 | Labour Day |
| 2023-10-09 | Canadian Thanks Giving |
