PUT SOME

TEETH

INTO IT

MX1160R Heavy Duty Fixed Tooth Mulcher for Excavator, 18 to 33 Ton

The Baumalight MX1160R Brush Mulcher has a 60” rotor and is designed for excavators up to 33 tons. The MX1160R comes with unique performance boosting mulcher rings (licensed by Denis Cimaf). These rings improve the speed and efficiency of your mulching while reducing the risk of breakage on the tooth holders by limiting the size of the bites.

The MX1160R uses a fixed tooth holder and comes with 31 sharpenable planer teeth (P11000), as you will see in the brush cutting size charts this allow mulching of much larger material with an average carrier. The MX1160R comes with aggressive root rake ripper teeth build into the frame to rip out rocks and move logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel.

Free Teeth Promo

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

REPLACEABLE BOLT-IN LINER

Save time by easily replacing the AR400 steel wear plates on the MX1160R without needing to remove the rotor.

Replaceable bolt in wear plates

ADJUSTABLE BELT TENSIONER

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

Adjustable belt tensioner

Belt tensioner adjustment bolts

Belt tension adjustment can be made by fine-tuning the two puller bolts that move a sliding plate on which the motor is mounted.

Belt tensioner adjustment bolts

OPTIONAL TWO-SPEED MOTOR

To maximize the rotor speed and torque to account for changing mulching material, the MX1160R is available with a variable two-speed motor option.

BENT AXIS PISTON MOTORS ARE A STANDARD OPTION

Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.

Bent axis piston motor

WIRE PROTECTION KIT

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

Wire protection kit

CHAIN CURTAIN

The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits.

Chain curtain

EASY ACCESS GREASE FITTINGS

Reduce your regular maintenance time by easily greasing the bearings on the MX1160R from outside the frame. No tools required.

Easy access grease fittings

Outside grease fitting for rotor bearings

Periodic regreasing of the rotor bearing is made easier with Outside grease fitting for rotor bearings.

Outside grease fitting for rotor bearings

OVERTORQUE PROTECTION - RELIEF VALVE

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

Overtorque protection relief valve

CASE DRAIN – VENT TO ATMOSPHERE

To prevent pressure relief activation on the motor seal, the MX1160R comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. To learn more CLICK HERE about the case drain line.

Breather plug for zero leak

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Hydraulic Flow & Pressure Database

For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.

Click here for details.

Hydraulic flow pressure

Adjustable excavator mounting options

There are several adjustment holes for excavator mounting, providing a flexible mounting option for the comfort of the operator.

Adjustable excavator mounting options

Hose clamp

Designed specially to keep the hoses secure and prevents hose fittings from getting damaged.

Hose clamp

Moveable hose clamp cover

In addition to the standard covers, a movable hose clamp cover is provided to allow for flexible hose routing dependent on the position of the customer's excavator hose connections.

Moveable hose clamp cover

Root rake teeth

The MX1160R are equipped with a root rake for pushing fallen logs or other debris out of the way. These are replaceable bucket-style scrapper teeth.

Root rake teeth

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model No. MX230 MX330 MX530 MX530R MX548R MX948R MX960R MX1160R
Baumalight Connection Code A02 A02 A02 A02 A03 A03 A03 A03
Path Width 38" 38" 40" 40" 62" 70" 90" 90"
Rotor Width 30" 30" 30" 30" 48" 48" 60" 60"
Maximum Carrier Ton 6 8 12 12 20 30 33 33
Minimum Carrier Ton 2 3 4 4 7 12 18 18
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level Level Level
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Cutting Style Flall High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped Carbide Double Tipped Carbide Sharpenable Planer teeth
Tooth Part number F2000 H3000 P5000 P5000 P5000 R9000 R9000 P11000
Number of Cutters - - 64 64 104 - - -
Number of cutters (if shipped with new spiral tooth pattern) 22 36 44 44 72 27 38 31
Rotor Shaft Size 1.5" 2" 2" 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 18.5" 18.5" 18.5"
Rotor Weight (with tools) 125 lbs 175 lbs 300 lbs 300 lbs 408 lbs 617 lbs 860 lbs 872 lbs
No. of Motor 1 1 1 1 1 1 1 1
Case Drain Not important Not important See motor options See motor options Critical Critical Critical Critical
Unit Weight 500 lbs 750 lbs 1036 lbs 1166 lbs 2167 lbs 2838 lbs 2910 lbs 2925 lbs

Model No. MX230 MX330 MX530 MX530R MX548R MX948R MX960R MX1160R
Baumalight Connection Code A02 A02 A02 A02 A03 A03 A03 A03
Path Width 38" 38" 40" 40" 62" 70" 90" 90"
Rotor Width 30" 30" 30" 30" 48" 48" 60" 60"
Maximum Carrier Ton 6 8 12 12 20 30 33 33
Minimum Carrier Ton 2 3 4 4 7 12 18 18
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level Level Level
Holder Style Swing Fixed Fixed Fixed Fixed Fixed Fixed Fixed
Cutting Style Flall High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped Carbide Double Tipped Carbide Sharpenable Planer teeth
Tooth Part number F2000 H3000 P5000 P5000 P5000 R9000 R9000 P11000
Number of Cutters - - 64 64 104 - - -
Number of cutters (if shipped with new spiral tooth pattern) 22 36 44 44 72 27 38 31
Rotor Shaft Size 1.5" 2" 2" 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 17.25" 15" 15" 15" 15" 18.5" 18.5" 18.5"
Rotor Weight (with tools) 125 lbs 175 lbs 300 lbs 300 lbs 408 lbs 617 lbs 860 lbs 872 lbs
No. of Motor 1 1 1 1 1 1 1 1
Case Drain Not important Not important See motor options See motor options Critical Critical Critical Critical
Unit Weight 500 lbs 750 lbs 1036 lbs 1166 lbs 2167 lbs 2838 lbs 2910 lbs 2925 lbs

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

1100 Series

MOTOR PSI CASE DRAIN 20
GPM
25
GPM
30
GPM
35
GPM
40
GPM
45
GPM
50
GPM
55
GPM
60
GPM
65
GPM
70
GPM
75
GPM
RPM 1450 1800 2100
C1130
Bent Axis Piston
2500
3000
3500
4000
Critical 4.5"
5"
5.5"
6.5"
5.5"
6"
6.5"
7"
6.5"
7"
7.5"
8"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1500 1800 2100
C1140
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
6.25"
6.75"
7.25"
7.75"
8.25"
8.5"
8.75"
9"
8.5"
9"
9.5"
10"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1600 1875 2140
C1150
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
8.5"
9"
9.5"
9.75"
10"
10.5"
11"
11.5"
10.5"
11"
11.5"
12"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1630 1830 2030
C1170
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
9.5"
10"
11.5"
12"
10"
10.5"
11"
11.5"
11.5"
12"
12.5"
13"
12"
12.5"
13"
13.5"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
RPM 1400 1570 1750 1900
C1190
Bent Axis Piston
2500
3000
3500
4000
Critical --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
10"
10.5"
11"
11.5"
12.5"
13"
13.5"
14.5"
14"
14.5"
15"
15.5"
14.5"
15"
15.5"
16.5"
--
--
--
--
--
--
--
--
--
--
--
--
RPM Adjustable
D117X2
Two speed
2500
3000
3500
4000
Critical 5.5"
6.25"
6.75"
8"
7.75"
8.25"
9"
9.5"
10.5"
11.25"
11.5"
12"
12.5"
13"
13.5"
14.25"
13"
13.75"
14.25"
15"
14.25"
15"
15.5"
16.25"
15.5"
16.25"
16.75"
18"
17.5"
18"
18.75"
19.25"
18"
18.75"
19.25"
20.5"
19"
19.75"
20.25"
21.5"
20"
20.75"
21.25"
22.5"
21"
21.75"
22.25"
23.5"

Learn More About Case Drains

Learn More About Motor Types

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

UNDERSTANDING MOTOR TYPES

HOW TO CHOOSE THE RIGHT HYDRAULIC MOTOR FOR YOUR BRUSH MULCHER

The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.

THREE TYPES OF MOTORS

Gear motors

GEAR MOTORS

Roller-vane gerotor motors

ROLLER-VANE GEROTOR MOTORS

Bent axis piston motors

BENT AXIS PISTON MOTORS

Hydraulic Flow & Pressure Hydraulic Flow & Pressure
logo
logo
Updated as of February 3, 2023 7:15 AM EST

UPCOMING PUBLIC HOLIDAYS

Date Description

Lead time for MX1160R

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description
MX1160R

Lead time for other Mulchers

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description
MP348-540
MP360-540
MP560-540
MP572-540
MP572-100010% Demo unit at Cummings & Bricker
MP972-540
MP972-1000
MS348-A450
MS548
MS548-C510
MS560
MS560-C510
MS560-C530
MS560-C540
MS560-C550
MS572
MS572-C530
MS572-C540
MS572-C550
MS960
MS960-C940
MS960-C950
MS960-D97X2 2 speed motor
MS972
MS972-C940
MS972-C950
MS972-D97X2 2 speed motor
MS1160
MS1160-C11507% New stock in Texas and Canada
MS1160-D117X2 2 speed motor
MX230-F2000
MX230-F3000
MX330-A450
MX530
MX530-C508
MX530-C510 Stock unit w/o mount
MX530-C530 Stock unit w/o mount
MX530R
MX530R-C510 Stock unit w/o mount
MX548
MX548R
MX948R
MX960R
MX1160R

PUBLIC HOLIDAYS

Date Description
2023-02-20Family day, Business Closed for Public holiday