PUT SOME
TEETH
INTO IT
PUT SOME
TEETH
INTO IT
Our most economical brush mulcher for skidsteers. With adequate flow, the MS248 flail cutter will efficiently cut heavy grass and small diameter brush using 30 flail teeth. Flail teeth will swing back when hitting stones so less damage is done to the flail tooth.
Operating a Brush Mulcher from a skid steer is probably the most comfortable way for vegetation management, as your work is directly in front of you and new skidsteers are very operator-comfort focused.
See our brush cutting size chart to see how much this light weight skidsteer mounted forestry mulcher can tear up.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
These durable skid shoes help the mulcher to better float over the ground for optimal cutting action.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Currently available on our 200 Series mulchers, these flail type cutters are an economic and efficient way to beat back heavy vegetation and light to moderate brush. Ideally suited for small carriers, these flails provide good cutting performance and great mulching. Bolt-on replaceable for quick and easy servicing, even in the field.
Upgrade to our Heavy Blade Teeth and instantly increase your mulching capacity. These upgraded heavy duty blade teeth are 6mm thick and will allow you to double your brush size mulching capacity without any other equipment adjustments required.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.
These durable skid shoes help the mulcher to better float over the ground for optimal cutting action.
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine.
Currently available on our 200 Series mulchers, these flail type cutters are an economic and efficient way to beat back heavy vegetation and light to moderate brush. Ideally suited for small carriers, these flails provide good cutting performance and great mulching. Bolt-on replaceable for quick and easy servicing, even in the field.
Upgrade to our Heavy Blade Teeth and instantly increase your mulching capacity. These upgraded heavy duty blade teeth are 6mm thick and will allow you to double your brush size mulching capacity without any other equipment adjustments required.
For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.
| MS248 | MS348 | MS548 | MS560 | MS572 | iSeries MS760 | MS960 | MS972 | MS1160 | |
|---|---|---|---|---|---|---|---|---|---|
| Path Width | 60" | 60" | 62" | 75" | 87" | 75" | 75" | 84" | 75" |
| Rotor Width | 48" | 48" | 48" | 60" | 72" | 60" | 60" | 72" | 60" |
| Minimum carrier weight | 2,000 | 3,000 | 4,000 | 5,500 | 6,000 | 8,000 | 7,000 | 7,500 | 7,000 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Tool Style | Flail | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Double Tipped | Double Tipped | Sharpenable Planer |
| Number of cutters | 30 | 60 | 104 | 126 | 160 | 78 | 38 | 43 | 31 |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 17.25" | 18.5" | 18.5" | 19.3" |
| Rotor Weight (with tools) | 125 lbs | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 800 lbs | 860 lbs | 1,105 lbs | 860 lbs |
| System Protection | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief |
| Hydraulic Couplers | Included | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included | Not Included |
| Unit Shipping Weight | 750 lbs | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2600 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
| MS248 | MS348 | MS548 | MS560 | MS572 | iSeries MS760 | MS960 | MS972 | MS1160 | |
|---|---|---|---|---|---|---|---|---|---|
| Path Width | 60" | 60" | 62" | 75" | 87" | 75" | 75" | 84" | 75" |
| Rotor Width | 48" | 48" | 48" | 60" | 72" | 60" | 60" | 72" | 60" |
| Minimum carrier weight | 2,000 | 3,000 | 4,000 | 5,500 | 6,000 | 8,000 | 7,000 | 7,500 | 7,000 |
| Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground | Standard level – Optional skid shoes for below ground |
| Holder Style | Swing | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Tool Style | Flail | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Carbide Tapper Fit | Double Tipped | Double Tipped | Sharpenable Planer |
| Number of cutters | 30 | 60 | 104 | 126 | 160 | 78 | 38 | 43 | 31 |
| Rotor Diameter (tool tips) | 17.25" | 15" | 15" | 15" | 15" | 17.25" | 18.5" | 18.5" | 19.3" |
| Rotor Weight (with tools) | 125 lbs | 230 lbs | 480 lbs | 575 lbs | 700 lbs | 800 lbs | 860 lbs | 1,105 lbs | 860 lbs |
| System Protection | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief | Built-In Relief |
| Hydraulic Couplers | Included | Included | Check with Dealer | Check with Dealer | Check with Dealer | Not Included | Not Included | Not Included | Not Included |
| Unit Shipping Weight | 750 lbs | 950 lbs | 1491 lbs | 2115 lbs | 2266 lbs | 2600 lbs | 2975 lbs | 3115 lbs | 2800 lbs |
| MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
|---|---|---|---|---|---|---|
| RPM | 832 | 1060 | 1250 | 1390 | ||
| 200 Series Motor Standard Cup Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.25" 0.375" 0.375" |
0.375" 0.5" 0.5" |
0.5" 0.75" 0.75" |
0.75" 1" 1" |
| RPM | 832 | 1060 | 1250 | 1390 | ||
| 200 Series Motor Heavy Blade Teeth | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.5" 0.75" 0.75" |
0.75" 1" 1" |
1" 1.5" 1.5" |
1.5" 2" 2" |
| MOTOR | PSI | CASE DRAIN | 12 GPM | 15 GPM | 18 GPM | 20 GPM |
|---|---|---|---|---|---|---|
| RPM | 832 | 1060 | 1250 | 1390 | ||
| 300 Series Motor | 2500 3000 3500 |
Not Important for Roller-Vane motors | 0.75" 1" 1" |
1" 1.25" 1.25" |
1.25" 1.5" 1.5" |
2" 2.5" 2.5" |
| MOTOR | PSI | CASE DRAIN | 8 GPM |
12 GPM |
15 GPM |
20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 555 | 832 | 1060 | 1390 | ||||||||||
| A450 Roller-Vane | 2500 3000 3500 |
Not Needed Not Needed Recommended |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1" 1.25" 1.25" |
1.5" 2" 2" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 640 | 846 | 1100 | 1370 | 1600 | |||||||||
| B550 Roller-Vane | 2500 3000 3500 |
Not Needed Recommended Needed |
-- -- -- |
0.25" 0.5" 0.5" |
0.75" 1" 1" |
1.25" 1.75" 1.75" |
2.5" 3" 3" |
3" 3.5" 3.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1090 | 1640 | 2050 | |||||||||||
| C508 Bent Axis Piston | 3000 3500 4000 |
Critical | 1.5" 2" 2.5" |
2.25" 2.75" 3.25" |
2.75" 3.25" 4" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1190 | 1490 | 2000 | 2490 | ||||||||||
| C510 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
2" 2.5" 3" |
2.5" 3" 3.5" |
3" 3.5" 4.5" |
3.5" 4.5" 5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1450 | 1800 | 2100 | |||||||||||
| C530 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
3" 3.5" 4.5" |
4" 4.5" 5" |
5" 5.5" 5.75" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | |||||||||||
| C540 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
3.75" 4.25" 4.75" |
5.5" 5.75" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | |||||||||||
| C550 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5" 5.5" 5.75" |
6.5" 7" 7.5" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | ||||||||||
| C570 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
6" 6.5" 7" |
5.5" 6" 6.5" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | ||||||||||
| C590 Bent Axis Piston | 3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5" 5.5" 6" |
7.5" 8" 9" |
9" 9.5" 10" |
9.5" 10" 11" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||||
| C730 Bent Axis Piston |
3000 3500 4000 |
Critical | 3.5" 4" 5" |
4.5" 5" 5.5" |
5.5" 6" 6.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||||
| C740 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.25" 4.75" 5.25" |
6" 6.25" 6.5" |
6.5" 7" 7.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||||
| C750 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
5.5" 6" 6.25" |
7" 7.5" 8" |
7.5" 8" 8.5" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||||
| C770 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6.5" 7" 7.5" |
6" 6.5" 7" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | |||||||
| C790 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
5.5" 6" 6.5" |
8" 8.5" 9.5" |
9.5" 10" 10.5" |
10" 10.5" 11.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||
| C930 Bent Axis Piston |
3000 3500 4000 |
Critical | 4" 4.5" 5.5" |
5" 5.5" 6" |
6" 6.5" 7" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||
| C940 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
4.75" 5.25" 5.75" |
6.5" 6.75" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||
| C950 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
6" 6.5" 6.75" |
7.5" 8" 8.5" |
8" 8.5" 9" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||
| C970 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
6" 7.5" 8" |
6.5" 7" 7.5" |
8" 8.5" 9" |
8.5" 9" 9.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
| MOTOR | PSI | CASE DRAIN | 20 GPM |
25 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
50 GPM |
55 GPM |
60 GPM |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RPM | 1450 | 1800 | 2100 | ||||||||
| C1130 Bent Axis Piston |
3000 3500 4000 |
Critical | 5" 5.5" 6.5" |
6" 6.5" 7" |
7" 7.5" 8" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1500 | 1800 | 2100 | ||||||||
| C1140 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
6.75" 7.25" 7.75" |
8.5" 8.75" 9" |
9" 9.5" 10" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1600 | 1875 | 2140 | ||||||||
| C1150 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
9" 9.5" 9.75" |
10.5" 11" 11.5" |
11" 11.5" 12" |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1630 | 1830 | 2030 | |||||||
| C1170 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
10" 11.5" 12" |
10.5" 11" 11.5" |
12" 12.5" 13" |
12.5" 13" 13.5" |
-- -- -- |
-- -- -- |
| RPM | 1400 | 1570 | 1750 | 1900 | |||||||
| C1190 Bent Axis Piston |
3000 3500 4000 |
Critical | -- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
-- -- -- |
10.5" 11" 11.5" |
13" 13.5" 14.5" |
14.5" 15" 15.5" |
15" 15.5" 16.5" |
Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates
The most important part of choosing the right Brush Mulcher is pairing the correct motor option to your equipment. Choosing the right style of motor will make a huge difference in your performance and mulching capability. Watch our motor options video where we explain how to use our charts to determine which motor is right for you. Then click the link below to learn more about our 3 types of motors.
GEAR MOTORS
ROLLER-VANE GEROTOR MOTORS
BENT AXIS PISTON MOTORS
| Date | Description |
|---|
| Model Number | Discount Available | Number of Business Days to build first order |
Number of Business Days to build next order |
Location | Notes | Discount Description |
|---|---|---|---|---|---|---|
| FMM148 | Stock | 91 | MTB | 1 rental and 1 new unit in stock | ||
| FMS260 | 88 | 88 | Extended lead time on 46cc gear motor option. | |||
| FMS280 | 88 | 88 | MTB | Extended lead time on 46cc gear motor option. | ||
| FMP260 | 5% + more for media | 86 | 86 | MTB | Pre-Production | List Price of $3,500.00 - Pre-Production |
| MP348 | 56 | 64 | ||||
| MP360 | 56 | 64 | ||||
| MP548 | 264 | 264 | Discontinuing | |||
| MP560 | 26 | 26 | ||||
| MP572 | 79 | 87 | ||||
| iMP772 | 101 | 101 | ||||
| MP972 | 236 | 236 | ||||
| MS248 | 486 | 486 | Not Taking New Orders at this Time | |||
| MS348 | Stock | 37 | ||||
| MS548 | 78 | 78 | ||||
| MS560 | 78 | 78 | ||||
| MS572 | 86 | 86 | ||||
| CSC760 | 5% | Stock | 48 | Floor Model | ||
| MS960 | 55 | 86 | ||||
| MS972 | 78 | 86 | ||||
| MS1160 | 55 | 86 | ||||
| MX230 | Stock | 37 | Stock unit w/o mount | |||
| MX330 | Stock | 39 | MTB | Stock unit for Canada only | ||
| MX330G | 111 | 111 | Gear Motor Model 20% more efficient | |||
| MX530 | 78 | 78 | ||||
| MX530R | 86 | 86 | ||||
| MX548 | 78 | 78 | ||||
| MX548R | 91 | 91 | ||||
| MX960R | 88 | 88 | ||||
| MX1160R | 86 | 86 |
| Date | Description |
|---|---|
| 2021-05-13 | Closed for assentation day |
| 2021-05-24 | Victoria Day |
