PUT SOME

TEETH

INTO IT

MP972 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 900 series Baumalight mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The MP972 masticating head Brush Mulcher is designed to fit tractors with 90 - 135 HP and Cat 2 or 3 3PH. The 900 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth. Their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 900 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. Its flat profile however makes it vulnerable to shattering on impact with rocks and other debris. Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. A usefull feature on the Baumalight MP972 Brush Mulcher is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results. With direct drive from the engine, all the way through the heavy duty gear box, to the teeth, the MP972 PTO Brush Mulcher is a very efficient way to clear heavy brush and small trees.

Free Teeth Promo

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

Service And Instructional Videos

INTEGRATED PUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated push bar

Adjustable skid shoes

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.

Adjustable skid shoes

V-Notch

The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.

V Notch

Hardened Tooth Holders

These heavy-duty tooth holders resist bending and keep you working longer.

Hardened tooth holders

6 FREE TEETH

All MP572 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

6 free teeth

Optional 500 Series Ripper Teeth

The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field.

All units shipped with Standard P5000 Series Planer Teeth only and ripper teeth can be installed as the planer teeth need replacing. Units can be operated with a mix of Planer and Ripper teeth.

500 Series ripper teeth

spiral tooth pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

HYDRAULIC DOORS

The single debris door is controlled hydraulically from the cab to give the operator more control of the mulching action. When closed the mulch debris is more controlled and a finer mulch is produced

Hydraulic doors

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Chain curtain

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

Chain curtain

Greaseable pins

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

Greaseable pins

HARDENED STEEL BUSHINGS

Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Hardened steel bushings

heavy duty frame

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.

Heavy duty frame

powder coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coated

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.

Double shielded hoses

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

Service And Instructional Videos

REPLACEABLE BOLT-IN LINER

Save time by easily replacing the AR400 steel wear plates on the ms960 without needing to remove the rotor.

Integrated push bar

WIRE PROTECTION KIT

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

Adjustable skid shoes

CHAIN CURTAIN

The rear of the unit is guarded by a 3/8" thick chain curtain so standing brush enters and mulched debris exits.

V Notch

EASY ACCESS GREASE FITTINGS

Reduce your regular maintenance time by easily greasing the bearings on the MP972 from outside the frame. No tools required.

Hardened tooth holders

SLIP CLUTCH

To protect the gearbox and drive system, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

6 free teeth

HEAVY DUTY GEARBOX

Heavy duty gearbox for high performance and better mulching power and long life.

500 Series ripper teeth

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Spiral tooth pattern

GREASEABLE PINS

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

Slip clutch

HARDENED STEEL BUSHING

Spring Bushing made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Heavy duty gearbox

ADJUSTABLE BELT TENSIONER

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

Adjustable belt tensioner

Directional felling hook

Built into the pusher bar, the directional felling hook will directionally control wayward trees, sprawling clumps and low hanging limbs.

Directional felling hook

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.

Double shielded hoses

heavy duty frame

Now completely redesigned for the 900 series Brush Mulcher, the heavy duty steel frame is constructed with T1 alloy tool steel sheet metal.

Heavy duty frame

BACK HYDRAULIC DOORS

The MP972 is the only Baumalight mulcher with an adjustable back door, this can be raised for forward driving with ground engagement and lowered for backward driving into the brush.

Hydraulic doors

FRONT HYDRAULIC DOOR

Equipped with front and rear hydraulically controlled debris doors. They are controlled from the cab to give the operator more control of the mulching action. When front door is closed, the mulch debris is more controlled and a finer mulch is produced. Open the rear door to better attack stubborn brush by exposing more of the rotor.

FRONT HYDRAULIC DOOR

Integrated push bar

When push comes to shove, the integrated push bar helps control

Integrated push bar

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powdered coated

6 FREE TEETH

All MP972 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment.

6 FREE TEETH

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of Cutters - - 126 160 -
Number of cutters (if shipped with new spiral tooth pattern) 60 74 92 112 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility Yes Yes No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540 (Max Engine HP 110) 540 (Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes
Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of Cutters - - 126 160 -
Number of cutters (if shipped with new spiral tooth pattern) 60 74 92 112 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility Yes Yes No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540 (Max Engine HP 110) 540 (Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

900 Series

MODEL TRACTOR SPEED RPM 100 HP 125 HP 150 HP
MP972 Low Gear
Creeper
Hydrostatic
1800 7"
9"
13"
9"
10"
15"
10"
12"
17"
logo
logo
Updated as of March 28, 2024 2:36 PM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description
2024-03-29Good Friday

Lead time for MP972

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description
MP972-1000
MP972-540

Lead time for other Mulchers

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description
MP348-540
MP360-540
MP560-540
MP572-540
MP572-1000
MP972-540
MP972-1000
MS348-A450
MS548-A450
MS548-B550
MS548-C508
MS548-C510
MS548-C530
MS548-C540
MS548-C550
MS560-C508
MS560-C510
MS560-C530
MS560-C540
MS560-C550
MS572-C530
MS572-C540
MS572-C550
MS960-C930
MS960-C940
MS960-C950
MS960-D97X2 2 speed motor
MS972-C930
MS972-C940
MS972-C950
MS972-D97X2 2 speed motor
MS1160-C1130
MS1160-C1140
MS1160-C1150
MS1160-D117X2 2 speed motor
MX230-F2000End user to communicate with Menno Extra discount for supplying action shot videos - End user must fill out https://baumalight.com/factorydiscounts/contact_us/ form to get started
MX230-F3000End user to communicate with Menno Extra discount for supplying action shot videos - End user must fill out https://baumalight.com/factorydiscounts/contact_us/ form to get started
MX330-A450
MX530-A450
MX530-B550
MX530-C508 Stock unit w/o mount
MX530-C510 Stock unit w/o mount
MX530-C530
MX530-C540
MX530-C550
MX530R-C508
MX530R-C510
MX530R-C530
MX530R-C540
MX530R-C550
MX548R-C510
MX548R-C530
MX548R-C540
MX548R-C550
MX548R-C570
MX548R-C590
MX948R-C940
MX948R-C950
MX948R-C970
MX948R-C990
MX948R-D97X2 2 speed
MX960R-C940
MX960R-C950
MX960R-C970
MX960R-C990
MX960R-D97X2 2 speed
MX1160R-C1140
MX1160R-C1150
MX1160R-C1170
MX1160R-C1190
MX1160R-D117X2 2 speed

PUBLIC HOLIDAYS

Date Description
2024-05-20Victoria Day