PUT SOME

TEETH

INTO IT

iMP772 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 700 series Baumalight mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The 700 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth. Their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 700 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. Its flat profile however makes it vulnerable to shattering on impact with rocks and other debris.
Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. Also unique on the MP560 and bigger sizes of tractor mount mulchers is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results.
With direct drive from the engine, all the way through the heavy duty gear box to the teeth a brush mulcher on the PTO of a tractor is the most efficient way to use a brush mulcher for land clearing.

Free Teeth Promo

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

INTEGRATED PUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated push bar

ADJUSTABLE SKID SHOES

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.

Adjustable skid shoes

700 Series Ripper Teeth

The 700 Series tooth utilizes the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.

700 Series ripper teeth

OPTION TO CHANGE OUT FOR 700 SERIES PLANER TEETH

Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.

700 Series planer teeth

Hardened Tooth Holders

These heavy-duty tooth holders resist bending and keep you working longer.

Hardened tooth holders

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

HYDRAULIC DOORS

Equipped with front and rear hydraulically controlled debris doors. They are controlled from the cab to give the operator more control of the mulching action. When front door is closed, the mulch debris is more controlled and a finer mulch is produced. Open the rear door to better attack stubborn brush by exposing more of the rotor.

Hydraulic doors

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

WIRE PROTECTION KIT

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

CHAIN CURTAIN

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

Chain curtain

GREASEABLE PINS

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

Greaseable pins

HARDENED STEEL BUSHING

Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Hardened steel bushings

heavy duty frame

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.

Heavy duty frame

powdered coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coated

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.

Double shielded hoses

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

INTEGRATED PUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated push bar

ADJUSTABLE SKID SHOES

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.

Adjustable skid shoes

700 Series Ripper Teeth

The 700 Series tooth utilizes the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.

700 Series ripper teeth

OPTION TO CHANGE OUT FOR 700 SERIES PLANER TEETH

Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where efficiency is more important than tooth life.

700 Series planer teeth

Hardened Tooth Holders

These heavy-duty tooth holders resist bending and keep you working longer.

Hardened tooth holders

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

HYDRAULIC DOORS

Equipped with front and rear hydraulically controlled debris doors. They are controlled from the cab to give the operator more control of the mulching action. When front door is closed, the mulch debris is more controlled and a finer mulch is produced. Open the rear door to better attack stubborn brush by exposing more of the rotor.

Hydraulic doors

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

WIRE PROTECTION KIT

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

CHAIN CURTAIN

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

Chain curtain

GREASEABLE PINS

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

Greaseable pins

HARDENED STEEL BUSHING

Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Hardened steel bushings

heavy duty frame

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.

Heavy duty frame

powdered coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coated

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.

Double shielded hoses

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS



Model No. MP348 MP360 MP548 MP560 MP572 iSeries MP772 Large Shaft to up the HP
Path Width 60" 72" 62" 75" 87" 84" D002134
Rotor Width 48" 60" 48" 60" 72" 72"
Maximum Engine HP 50 55 75 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 40 45 50 90
Cutting Depth Level Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 4" Below
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tapper Fit
Number of Cutters 60 74 104 126 160 94
Rotor Shaft Size 2" 2" 2" 2" 2" 2.5"
Rotor Diameter (tool tips) 15" 15" 15" 15" 15" 17.25"
Rotor Weight (with tools) 230 lbs 315 lbs 480 lbs 575 lbs 700 lbs 930 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility No No No No No No No
Drive Speed 540 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110) 540(Max Engine HP 110)
Gearbox Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch
Unit Weight 1050 lbs 1200 lbs 1600 lbs 2145 lbs 2500 lbs 4558 lbs
Hydraulic Requirements Not Applicable Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes
Model No. MP348 MP360 MP548 MP560 MP572 iSeries MP772 Large Shaft to up the HP
Path Width 60" 72" 62" 75" 87" 84" D002134
Rotor Width 48" 60" 48" 60" 72" 72"
Maximum Engine HP 50 55 75 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 40 45 50 90
Cutting Depth Level Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 4" Below
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tapper Fit
Number of Cutters 60 74 104 126 160 94
Rotor Shaft Size 2" 2" 2" 2" 2" 2.5"
Rotor Diameter (tool tips) 15" 15" 15" 15" 15" 17.25"
Rotor Weight (with tools) 230 lbs 315 lbs 480 lbs 575 lbs 700 lbs 930 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility No No No No No No No
Drive Speed 540 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110) 540(Max Engine HP 110)
Gearbox Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch
Unit Weight 1050 lbs 1200 lbs 1600 lbs 2145 lbs 2500 lbs 4558 lbs
Hydraulic Requirements Not Applicable Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

300 Series

MODEL TRACTOR SPEED RPM 25 HP 30 HP 40 HP 55 HP
300 Series
Low Gear Slow Reverse 1800 0.5" 1" 1.5" 2"
Low Gear Stop & Chew 1" 1.5" 2" 2.5"
Hydrostatic Slow Reverse 1.5" 2" 2.5" 3"
Hydrostatic Stop & Chew 2" 3" 4" 5"

500 Series

MODEL TRACTOR SPEED RPM 45 HP 50 HP 60 HP 65 HP 68 HP 75 HP 100 HP 125 HP
MP548 / MP560 Low Gear
Creeper
Hydrostatic
1800 1"
2"
3"
1.5"
2.5"
4"
2"
3"
5"
--
--
--
2.5"
4"
6"
--
--
--
--
--
--
--
--
--
MP572 Low Gear
Creeper
Hydrostatic
1800 --
--
--
--
--
--
--
--
--
2.5"
4"
6"
--
--
--
3"
5"
8"
3.5"
6"
10"
4"
7"
12"

700 Series

MODEL TRACTOR SPEED RPM 100 HP 125 HP 150 HP
iMP772 Low Gear
Creeper
Hydrostatic
1800 5"
7"
11"
7"
8"
13"
8"
10"
15"
logo
logo
Updated as of March 2, 2021 6:40 PM EST

UPCOMING PUBLIC HOLIDAYS

Date Description

Lead time for MP772

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
iMP7726666

Lead time for other Mulchers

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
FMM1483656MTB1 rental unit in stock
FMS2605353Extended lead time on 46cc gear motor option.
FMS2805353MTBExtended lead time on 46cc gear motor option.
MP248256256NEED TO DESIGN
FMP26035% + more for media5151MTBPre-ProductionList Price of $3,500.00 - Pre-Production
MP348Stock19
MP360Stock19
MP5481919
MP5601414
MP5724752
iMP7726666
MP972201201
MS248451451Not Taking New Orders at this Time
MS348Stock19
MS5484646
MS5604646
MS5725151
iMS760661
MS9604651
MS9726671
MS11604651
MX2302121
MX330Stock19MTBStock unit w/blank weld-on plate
MX330G7676Gear Motor Model 20% more efficient
MX5304646
MX530R5959
MX54810%Stock46MIStock Unit is Discounted Unit Located In MI - Free Freight to DealerDemo/Floor Model - BL1002246
MX548R5656
iMX7485%1631Overstock Discount on New Unit OrdersRotor over stock discount (completely new unit)
iMX748R5%5151Overstock Discount on New Unit OrdersRotor over stock discount (completely new unit)
MX960R5353
MX1160R5151

PUBLIC HOLIDAYS

Date Description
2021-04-02Canadian public holiday - Do not count this as a production day