PUT SOME

TEETH

INTO IT

MP572 Fixed Tooth Mulcher for Power Take Off on a Tractor

Our 500 series fixed tooth brush mulchers for 3-point hitch tractors are designed to maintain and clear fence lines on farms and entry level contractor work. The 500 series Baumalight brush mulchers will efficiently mulch heavy brush and small trees and are offered with two different types of teeth. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines.
Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. Also unique on the MP560 and bigger sizes of tractor mount mulchers is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results.
With direct drive from the engine, all the way through the heavy duty gear box to the teeth a brush mulcher on the PTO of a tractor is the most efficient way to use a brush mulcher for land clearing.

Free Teeth Promo

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

INTEGRATED PUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated push bar

Adjustable skid shoes

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.

Adjustable skid shoes

V-Notch

The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.

V Notch

Hardened Tooth Holders

These heavy-duty tooth holders resist bending and keep you working longer.

Hardened tooth holders

6 FREE TEETH

All MP572 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

6 free teeth

OPTION TO CHANGE OUT FOR 500 SERIES Ripper TEETH

The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.

Optional Ripper Teeth can be order with unit to be installed by dealer or customer.

500 Series ripper teeth

spiral tooth pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

HYDRAULIC DOORS

The single debris door is controlled hydraulically from the cab to give the operator more control of the mulching action. When closed the mulch debris is more controlled and a finer mulch is produced

Hydraulic doors

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Chain curtain

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

Chain curtain

Greaseable pins

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

Greaseable pins

HARDENED STEEL BUSHINGS

Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Hardened steel bushings

heavy duty frame

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.

Heavy duty frame

powder coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coated

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.

Double shielded hoses

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

Local Support

INTEGRATED PUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated push bar

Adjustable skid shoes

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.

Adjustable skid shoes

V-Notch

The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.

V Notch

Hardened Tooth Holders

These heavy-duty tooth holders resist bending and keep you working longer.

Hardened tooth holders

6 FREE TEETH

All MP572 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

6 free teeth

OPTION TO CHANGE OUT FOR 500 SERIES Ripper TEETH

The 500 Series teeth come in two carbide tipped styles; Planer and Ripper. The Planer style teeth take small bites and provide the most efficient mulching and cutting. The Ripper style teeth have more of a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Both styles are Bolt-on replaceable for quick and easy servicing and replacement even in the field. 500 series teeth are V-Notched to work with the carbon hardened tooth holders.

Optional Ripper Teeth can be order with unit to be installed by dealer or customer.

500 Series ripper teeth

spiral tooth pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

HYDRAULIC DOORS

The single debris door is controlled hydraulically from the cab to give the operator more control of the mulching action. When closed the mulch debris is more controlled and a finer mulch is produced

Hydraulic doors

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Chain curtain

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

Chain curtain

Greaseable pins

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

Greaseable pins

HARDENED STEEL BUSHINGS

Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

Hardened steel bushings

heavy duty frame

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.

Heavy duty frame

powder coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powder coated

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.

Double shielded hoses

There are currently no customer photos or video submitted for this Baumalight product.Please check out similar products to see if there are submitted media available for those . Visit our Factory Discount web page to learn how you could participate in our Media Discount Program with your Baumalight product.



Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2.5" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of Cutters 60 74 126 160 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility No No No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes
Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2.5" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of Cutters 60 74 126 160 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility No No No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

500 Series

MODEL TRACTOR SPEED RPM 45 HP 50 HP 60 HP 65 HP 68 HP 75 HP 100 HP 125 HP
MP560 Low Gear
Creeper
Hydrostatic
1800 1"
2"
3"
1.5"
2.5"
4"
2"
3"
5"
--
--
--
2.5"
4"
6"
--
--
--
--
--
--
--
--
--
MP572 Low Gear
Creeper
Hydrostatic
1800 --
--
--
--
--
--
--
--
--
2.5"
4"
6"
--
--
--
3"
5"
8"
3.5"
6"
10"
4"
7"
12"

900 Series

MODEL TRACTOR SPEED RPM 100 HP 125 HP 150 HP
MP972 Low Gear
Creeper
Hydrostatic
1800 7"
9"
13"
9"
10"
15"
10"
12"
17"
Baumalight - Factory Discounts
Factory discount logo
PRE-PRODUCTION TESTING
PRE-PRODUCTION
TESTING
Media
MEDIA
Floor/Demo Models
FLOOR/DEMO
MODELS

MODEL DISCOUNT CATEGORY LOCATION DESCRIPTION
MP5722%
MTB1,000 rpm - Floor model BL1006856
*OFFERS INCLUDE FREE FREIGHT TO DEALER

PRODUCT DETAILS




PRE-PRODUCTION TESTING


Test our pre-production and prototype models for deep discounts by giving us all the necessary feedback to make sure these models meet the requirements demanded in the field. No Warranty can be provided on labour but you'll receive deep discounts through our dealer network as well as a 1 year warranty on parts* only. Baumalight understands this is not for everyone, but our discount program offers many benefits and we look forward to providing full warranty versions in the future once all product testing has been completed.

*Warranty labour must be performed by end user with no further compensation other than the deep discount off the original purchase price.


MEDIA


With any purchase from the following list you'll have the opportunity to work with our marketing agency to obtain photos and video footage for additional discounts or if you are located farther away we give a lesser discount for high definition pictures and video footage as well.


DEMO/FLOOR MODELS


Be sure to inquire about our many showroom floor,light demonstrator and discounted models
with available deep discounts.



logo
logo
Updated as of May 20, 2022 11:59 AM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description
2022-05-23Victoria Day

Lead time for MP572

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
MP5722%Stock40MTB2% on 1000 rpm floor model1,000 rpm - Floor model BL1006856

Lead time for other Mulchers

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
MP348Stock23
MP3602323
MP560Stock33
MP5722%Stock40MTB2% on 1000 rpm floor model1,000 rpm - Floor model BL1006856
MP972Stock55Stock w/1,000 rpm gearbox
MS348326
MS5482323
MS5601045
MS560-C510Stock41
MS560-C530Stock41
MS560-C5401053
MS560-C5501053
MS572649
MS572-C540Stock49
MS572-C550649
MS960649
MS960-C940Stock19
MS960-C950Stock19
MS960-D97X26492 speed motor
MS972649
MS972-C950649
MS972-D97X26492 speed motor
MS11601053
MS1160-C11501053
MS1160-D117X214572 speed motor
MX230-F2000Stock21
MX230-F3000346
MX330Stock46MTBStock unit w/o mount
MX5301313
MX530-C510Stock13Stock unit w/o mount
MX530R3846
MX530R-C510Stock46Stock unit w/o mount
MX5484747
MX548R5555
MX948R4553
MX960R1257
MX1160R5555

PUBLIC HOLIDAYS

Date Description
2022-07-01Canada day
2022-09-05Labour Day