PUT SOME

TEETH

INTO IT

MP360 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 300 series is our most light weight fixed tooth brush mulcher for 3-point hitch tractors. With low ground speed the MP360 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier.
The direct drive of a brush mulcher on the PTO of a tractor is the most efficient way to run a brush mulcher and if you check our brush cutting size charts you will see that the slower you can travel the bigger material you can handle.

Free Teeth Promo

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

Click here to find a local dealer.

Local Support

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

Service And Instructional Videos

Integrated brush bar

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated brush bar

Integrated skid shoes

These durable skid shoes help the mulcher to better float over the ground for optimal mulching action.

Integrated skid shoes

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

Hardened Tooth Holders

Heavy-duty teeth holders resist bending and keep you working longer.

Hardened tooth holders

6 FREE TEETH

All MP360 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

6 free teeth

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO Mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

Reinforced Belt

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powdered coated

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

Click here to find a local dealer.

Local Support

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

Service And Instructional Videos

Integrated brush bar

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated brush bar

Integrated skid shoes

These durable skid shoes help the mulcher to better float over the ground for optimal mulching action.

Integrated skid shoes

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

Hardened Tooth Holders

Heavy-duty teeth holders resist bending and keep you working longer.

Hardened tooth holders

6 FREE TEETH

All MP360 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

6 free teeth

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO Mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

Reinforced Belt

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powdered coated

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS



Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of Cutters - - 126 160 -
Number of cutters (if shipped with new spiral tooth pattern) 60 74 92 112 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility Yes Yes No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540 (Max Engine HP 110) 540 (Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes
Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of Cutters - - 126 160 -
Number of cutters (if shipped with new spiral tooth pattern) 60 74 92 112 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility Yes Yes No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540 (Max Engine HP 110) 540 (Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

300 Series

MODEL TRACTOR SPEED RPM 25 HP 30 HP 40 HP 55 HP
300 Series
Low Gear Slow Reverse 1800 0.5" 1" 1.5" 2"
Low Gear Stop & Chew 1" 1.5" 2" 2.5"
Hydrostatic Slow Reverse 1.5" 2" 2.5" 3"
Hydrostatic Stop & Chew 2" 3" 4" 5"

500 Series

MODEL TRACTOR SPEED RPM 45 HP 50 HP 60 HP 65 HP 68 HP 75 HP 100 HP 125 HP
MP560 Low Gear
Creeper
Hydrostatic
1800 1"
2"
3"
1.5"
2.5"
4"
2"
3"
5"
--
--
--
2.5"
4"
6"
--
--
--
--
--
--
--
--
--
MP572 Low Gear
Creeper
Hydrostatic
1800 --
--
--
--
--
--
--
--
--
2.5"
4"
6"
--
--
--
3"
5"
8"
3.5"
6"
10"
4"
7"
12"

900 Series

MODEL TRACTOR SPEED RPM 100 HP 125 HP 150 HP
MP972 Low Gear
Creeper
Hydrostatic
1800 7"
9"
13"
9"
10"
15"
10"
12"
17"
logo
logo
Updated as of March 28, 2024 8:08 AM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description
2024-03-29Good Friday

Lead time for MP360

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description
MP360-540

Lead time for other Mulchers

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description
MP348-540
MP360-540
MP560-540
MP572-540
MP572-1000
MP972-540
MP972-1000
MS348-A450
MS548-A450
MS548-B550
MS548-C508
MS548-C510
MS548-C530
MS548-C540
MS548-C550
MS560-C508
MS560-C510
MS560-C530
MS560-C540
MS560-C550
MS572-C530
MS572-C540
MS572-C550
MS960-C930
MS960-C940
MS960-C950
MS960-D97X2 2 speed motor
MS972-C930
MS972-C940
MS972-C950
MS972-D97X2 2 speed motor
MS1160-C1130
MS1160-C1140
MS1160-C1150
MS1160-D117X2 2 speed motor
MX230-F2000End user to communicate with Menno Extra discount for supplying action shot videos - End user must fill out https://baumalight.com/factorydiscounts/contact_us/ form to get started
MX230-F3000End user to communicate with Menno Extra discount for supplying action shot videos - End user must fill out https://baumalight.com/factorydiscounts/contact_us/ form to get started
MX330-A450
MX530-A450
MX530-B550
MX530-C508 Stock unit w/o mount
MX530-C510 Stock unit w/o mount
MX530-C530
MX530-C540
MX530-C550
MX530R-C508
MX530R-C510
MX530R-C530
MX530R-C540
MX530R-C550
MX548R-C510
MX548R-C530
MX548R-C540
MX548R-C550
MX548R-C570
MX548R-C590
MX948R-C940
MX948R-C950
MX948R-C970
MX948R-C990
MX948R-D97X2 2 speed
MX960R-C940
MX960R-C950
MX960R-C970
MX960R-C990
MX960R-D97X2 2 speed
MX1160R-C1140
MX1160R-C1150
MX1160R-C1170
MX1160R-C1190
MX1160R-D117X2 2 speed

PUBLIC HOLIDAYS

Date Description
2024-05-20Victoria Day