The 300 series is our most light weight fixed tooth masticating head brush mulcher for 3-point hitch tractors. With low ground speed the MP348 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier. The spiral tooth pattern helps in one tooth at a time for smooth mulching.
The direct drive of a brush mulcher on the PTO of a tractor is the most efficient way to run a brush mulcher and if you check our brush cutting size charts you will see that the slower you can travel the bigger material you can handle. A heavy duty reinforced belt delivers the force from the gear box to the rotor. Heavy duty gearbox for high performance and better mulching power and long life. To protect the gearbox and drive system, Baumalight PTO Mulchers come with a slip clutch, which automatically disengages the clutch at a predetermined torque. If a fence wire is caught during the mulching process , it can damage the unit by slipping over to the edge of the rotor and get wrapped on the shaft, so wire protection kit is provided to safeguard the rotor and the shaft.
The MS348 small tractor mounted brush mulcher as a rotor diameter of 15 inches(tool tips), rotor width of 48 inches and a path width of 60 inches. The A450 motor option has a cutting capacity of up to 4 inches in brush diameter, see the brush cutting chart to see what your tractor would do.
Model No. | MP348 | MP360 | MP560 | MP572 | MP972 | Large Shaft to up the HP |
---|---|---|---|---|---|---|
Path Width | 60" | 72" | 75" | 87" | 84" | D002134 |
Rotor Width | 48" | 60" | 60" | 72" | 72" | |
Maximum Engine HP | 50 | 55 | 75 | 125 | 135 | 90 - 155 PTO Hp |
Maximum PTO HP | 40 | 45 | 65 | 115 | 125 | Do not exceed 165 Engine Hp |
Minimum Engine HP | 25 | 30 | 45 | 50 | 90 | |
Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level to 2" Below Grade | |
Cutting Style | High Speed Teeth | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Double Tipped | |
Tooth Part number | H3000 | H3000 | P5000 | P5000 | R9000 | |
Number of cutters | 60 | 74 | 92 | 112 | 43 | |
Rotor Shaft Size | 2" | 2" | 2" | 2" | 2" | |
Rotor Diameter (tool tips) | 15" | 15" | 15" | 15" | 18.5" | |
Rotor Weight (with tools) | 230 lbs | 315 lbs | 575 lbs | 700 lbs | 1,105 lbs | |
Hitch Size | CAT 1 | CAT 1 | CAT 2 | CAT 2 | CAT 2 or 3 | |
Quick hitch compatibility | Yes | Yes | No | No | No | No |
Drive Speed | 540 | 540 | 540 | 1,000 | 1,000 | |
Drive Speed Options | 540 (Max Engine HP 110) | 540 (Max Engine HP 110) | ||||
Gearbox Spline Size | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | |
Tractor End Spline Size | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | 1.75" 20 -spline |
System Protection | Slip Clutch | Slip Clutch | Slip Clutch | Slip Clutch | Slip Clutch | |
Unit Weight | 1050 lbs | 1200 lbs | 2145 lbs | 2500 lbs | 3200 lbs | |
Hydraulic Requirements | Not Applicable | Not Applicable | 1 Remote | 1 Remote | 2 Remotes |
Model No. | MP348 | MP360 | MP560 | MP572 | MP972 | Large Shaft to up the HP |
---|---|---|---|---|---|---|
Path Width | 60" | 72" | 75" | 87" | 84" | D002134 |
Rotor Width | 48" | 60" | 60" | 72" | 72" | |
Maximum Engine HP | 50 | 55 | 75 | 125 | 135 | 90 - 155 PTO Hp |
Maximum PTO HP | 40 | 45 | 65 | 115 | 125 | Do not exceed 165 Engine Hp |
Minimum Engine HP | 25 | 30 | 45 | 50 | 90 | |
Cutting Depth | Level | Level | 1.5" Above to 1" Below Grade | 1.5" Above to 1" Below Grade | Level to 2" Below Grade | |
Cutting Style | High Speed Teeth | High Speed Teeth | Carbide Tipped Bolt In | Carbide Tipped Bolt In | Double Tipped | |
Tooth Part number | H3000 | H3000 | P5000 | P5000 | R9000 | |
Number of cutters | 60 | 74 | 92 | 112 | 43 | |
Rotor Shaft Size | 2" | 2" | 2" | 2" | 2" | |
Rotor Diameter (tool tips) | 15" | 15" | 15" | 15" | 18.5" | |
Rotor Weight (with tools) | 230 lbs | 315 lbs | 575 lbs | 700 lbs | 1,105 lbs | |
Hitch Size | CAT 1 | CAT 1 | CAT 2 | CAT 2 | CAT 2 or 3 | |
Quick hitch compatibility | Yes | Yes | No | No | No | No |
Drive Speed | 540 | 540 | 540 | 1,000 | 1,000 | |
Drive Speed Options | 540 (Max Engine HP 110) | 540 (Max Engine HP 110) | ||||
Gearbox Spline Size | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | |
Tractor End Spline Size | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | 1-3/8" | 1.75" 20 -spline |
System Protection | Slip Clutch | Slip Clutch | Slip Clutch | Slip Clutch | Slip Clutch | |
Unit Weight | 1050 lbs | 1200 lbs | 2145 lbs | 2500 lbs | 3200 lbs | |
Hydraulic Requirements | Not Applicable | Not Applicable | 1 Remote | 1 Remote | 2 Remotes |
MODEL | TRACTOR SPEED | RPM | 25 HP | 30 HP | 40 HP | 55 HP |
---|---|---|---|---|---|---|
300 Series | ||||||
Low Gear Slow Reverse | 1800 | 0.5" | 1" | 1.5" | 2" | |
Low Gear Stop & Chew | 1" | 1.5" | 2" | 2.5" | ||
Hydrostatic Slow Reverse | 1.5" | 2" | 2.5" | 3" | ||
Hydrostatic Stop & Chew | 2" | 3" | 4" | 5" |
MODEL | TRACTOR SPEED | RPM | 45 HP | 50 HP | 60 HP | 65 HP | 68 HP | 75 HP | 100 HP | 125 HP |
---|---|---|---|---|---|---|---|---|---|---|
MP560 | Low Gear Creeper Hydrostatic |
1800 | 1" 2" 3" |
1.5" 2.5" 4" |
2" 3" 5" |
-- -- -- |
2.5" 4" 6" |
-- -- -- |
-- -- -- |
-- -- -- |
MP572 | Low Gear Creeper Hydrostatic |
1800 | -- -- -- |
-- -- -- |
-- -- -- |
2.5" 4" 6" |
-- -- -- |
3" 5" 8" |
3.5" 6" 10" |
4" 7" 12" |
MODEL | TRACTOR SPEED | RPM | 100 HP | 125 HP | 150 HP |
---|---|---|---|---|---|
MP972 | Low Gear Creeper Hydrostatic |
1800 | 7" 9" 13" |
9" 10" 15" |
10" 12" 17" |