PUT SOME

TEETH

INTO IT

MP348 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 300 series is our most light weight fixed tooth brush mulcher for 3-point hitch tractors. With low ground speed the MP348 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier.
The direct drive of a brush mulcher on the PTO of a tractor is the most efficient way to run a brush mulcher and if you check our brush cutting size charts you will see that the slower you can travel the bigger material you can handle.

Integrated brush bar

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated brush bar

Integrated skid shoes

These durable skid shoes help the mulcher to better float over the ground for optimal mulching action.

Integrated skid shoes

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

Hardened Tooth Holders

Heavy-duty teeth holders resist bending and keep you working longer.

Hardened tooth holders

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO Mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

Reinforced Belt

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powdered coated

Integrated brush bar

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

Integrated brush bar

Integrated skid shoes

These durable skid shoes help the mulcher to better float over the ground for optimal mulching action.

Integrated skid shoes

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

High speed teeth

Hardened Tooth Holders

Heavy-duty teeth holders resist bending and keep you working longer.

Hardened tooth holders

Spiral Tooth Pattern

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

Spiral tooth pattern

Slip Clutch

To protect the gearbox and drive sytem, Baumalight PTO Mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

Slip clutch

Heavy Duty Gearbox

Heavy duty gearbox for high performance and better mulching power and long life.

Heavy duty gearbox

Reinforced Belt

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

Reinforced belt

Wire Protection Kit

Protective steel cover that prevents damage from wire fencing.

Wire protection kit

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

Powdered coated

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS

CUSTOMER VIDEO



Model No. MP348 MP360 MP548 MP560 MP572 iSeries MP772 Large Shaft to up the HP
Path Width 60" 72" 62" 75" 87" 84" D002134
Rotor Width 48" 60" 48" 60" 72" 72"
Maximum Engine HP 50 55 75 75 125 135 90 - 155 PTO Hp
Minimum Engine HP 25 30 40 45 50 90
Maximum PTO HP 40 45 65 65 115 125 Do not exceed 165 Engine Hp
Cutting Depth Level Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 4" Below
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tapper Fit
Number of Cutters 60 74 104 126 160 94
Rotor Shaft Size 2" 2" 2" 2" 2" 2.5"
Rotor Diameter (tool tips) 15" 15" 15" 15" 15" 17.25"
Rotor Weight (with tools) 230 lbs 315 lbs 480 lbs 575 lbs 700 lbs 930 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility No No No No No No No
Drive Speed 540 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110) 540(Max Engine HP 110)
Gearbox Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch
Unit Weight 1050 lbs 1200 lbs 1600 lbs 2145 lbs 2500 lbs 4558 lbs
Hydraulic Requirements Not Applicable Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes
Model No. MP348 MP360 MP548 MP560 MP572 iSeries MP772 Large Shaft to up the HP
Path Width 60" 72" 62" 75" 87" 84" D002134
Rotor Width 48" 60" 48" 60" 72" 72"
Maximum Engine HP 50 55 75 75 125 135 90 - 155 PTO Hp
Minimum Engine HP 25 30 40 45 50 90
Maximum PTO HP 40 45 65 65 115 125 Do not exceed 165 Engine Hp
Cutting Depth Level Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 4" Below
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tipped Bolt In Carbide Tapper Fit
Number of Cutters 60 74 104 126 160 94
Rotor Shaft Size 2" 2" 2" 2" 2" 2.5"
Rotor Diameter (tool tips) 15" 15" 15" 15" 15" 17.25"
Rotor Weight (with tools) 230 lbs 315 lbs 480 lbs 575 lbs 700 lbs 930 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility No No No No No No No
Drive Speed 540 540 540 540 1,000 1,000
Drive Speed Options 540(Max Engine HP 110) 540(Max Engine HP 110)
Gearbox Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spllne Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch Sllp Clutch
Unit Weight 1050 lbs 1200 lbs 1600 lbs 2145 lbs 2500 lbs 4558 lbs
Hydraulic Requirements Not Applicable Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

300 Series

MODEL TRACTOR SPEED RPM 25 HP 30 HP 40 HP 55 HP
300 Series
Low Gear Slow Reverse 1800 0.5" 1" 1.5" 2"
Low Gear Stop & Chew 1" 1.5" 2" 2.5"
Hydrostatic Slow Reverse 1.5" 2" 2.5" 3"
Hydrostatic Stop & Chew 2" 3" 4" 5"

500 Series

MODEL TRACTOR SPEED RPM 45 HP 50 HP 60 HP 65 HP 68 HP 75 HP 100 HP 125 HP
MP548 / MP560 Low Gear
Creeper
Hydrostatic
1800 1"
2"
3"
1.5"
2.5"
4"
2"
3"
5"
--
--
--
2.5"
4"
6"
--
--
--
--
--
--
--
--
--
MP572 Low Gear
Creeper
Hydrostatic
1800 --
--
--
--
--
--
--
--
--
2.5"
4"
6"
--
--
--
3"
5"
8"
3.5"
6"
10"
4"
7"
12"

700 Series

MODEL TRACTOR SPEED RPM 100 HP 125 HP 150 HP
iMP772 Low Gear
Creeper
Hydrostatic
1800 5"
7"
11"
7"
8"
13"
8"
10"
15"
logo
logo
Updated as of August 7, 2020 8:22 PM EDT

UPCOMING PUBLIC HOLIDAYS

Date Description

Lead time for MP348

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
MP3481515

Lead time for other Mulchers

Model Number Discount Available Number of Business Days
to build first order
Number of Business Days
to build next order
Location Notes Discount Description
FMM1483535MTBOut of stock on 46cc gear motors till late August. 1 pro-type in stock
FMS2601717Out of stock on 46cc gear motors till late August.
FMS2801717MTBOut of stock on 46cc gear motors till late August.
MP2489595NEED TO DESIGN
FMP2601515MTBPre-Production
MP3481515
MP3601115
MP5481515
MP5601212
MP5721616
iMP77215%319Floor Model
MS2483030
MS3481115
MS5481111
MS5601111
MS5721515
iMS7601115
iMS7721515MTB
MS9602525
MS9722525
MX2301117
MX3301115MTB
MX330G4040Out of stock on 46cc gear motors till late August. Gear Motor Model 20% more efficient
MX5301111
MX530R2323
MX5481111MTB
MX548R2020
iMX7481115
iMX748R2020
MX760R2020Same frame will work for 900 & 1100 series
MX960R2525

PUBLIC HOLIDAYS

Date Description
2020-09-07Labour Day
2020-10-12Thanksgiving
2020-12-25Christmas Day
2020-12-26Boxing Day