The cutting wheel is powered by the PTO (540) on your tractor with the swing and lift cylinders activated by the standard remotes on the tractor as well. 34 teeth on a 24” cutter and 54 teeth on a 34” cutter means less cutting for each tooth resulting in longer tooth life and smoother cutting for less wear on your tractor. Units are shipped standard with PTO shaft & standard quick couplers. The floating deflector contains the chips and debris and can be swung completely out of the way to cut close to fences. Grease zerks and replaceable brass bushings provided at major pivot points for extended service life. Heavy tooth population makes finer mulch and allows much smoother operation.

See it in action



External Control

This optional control is mounted on an adjustable arm to ensure optimal placement. The control is recommended for smaller tractors with limited HP to provide better cutting control and for tractors with only one remote. Improved feathering control on smaller tractors.

Uses a closed center valve.

Part #S1050

Flow Control

Make sure you adjust your flow control. This control allows you to adjust the cutting sweep to get the smothest cut possible, the full return allows you to return to the start of the cutting sweep as quickly as possible.

The Flow Control allows you to fine tune the cutting pass speed, to match the size and performance of your tractor.


The 540 PTO driven Stump Blasters are designed for 3 point hitch mount to your 30-90 HP tractors.

Gear Box

The rugged gear box transfers the PTO power from the tractor to the Stump Blaster Cutting System. Delivering 810 RPM and 803 Ft.-Lbs of torque of cutting power to the rotor and teeth.

Stabilizer Base

The heavy duty base provides a solid base for grinding. This allows for more consistent grinding performance and reduces the stress on your tractor.