Give new meaning to Pick Up Truck. Now you don’t need a tractor or skidsteer to move your trees. With the M22 trailer mount for 30"and 40" Nomads. The M22 combines mobility and power. All the power for digging and lifting is provided by a 20 hp gas power pack. Click Here for more info...



    

The standard skidsteer mount is a great way to move trees with the Nomad tree-spade, however to match the equipment you have with the size of trees you need to move Baumalight offers two additional types of mounting options.

To pair Nomad with your tractor’s 3PH mount Baumalight has developed the 6M, 7M and 9M 3 point hitch mounting systems. Each mount is designed to maximize the potential of your tractor and minimize the risk of damage. These 3ph mounts do all the heavy lifting, there’s no lifting done by the tractor arms. Positioning and lifting of the Nomad is achieved by the integrated lift cylinders. The parallel lift linkage lifts the tree and spade out of the hole. These frames also have a tilt control that helps position the frame solidly on the ground and to help with weight positioning during transport. Controls are extended so that the operator controls the spading action from the tractor. For optimal results we recommend pairing the 3PH mounts with a loader tractor or front mounted counterweights for easier tree removal and stable transport.








SPECIFICATIONS


• Cat 1*
• Weight 470 lbs.

SPECIFICATIONS


• Cat 2*
• Weight 700 lbs.

SPECIFICATIONS


• Cat 3*
• Weight 1221 lbs.
* Note: It is important not to push the pin category up or down with tree spade models. Doing so will result in damage to your 3-Point hitch.

POWER BUILT IN


The 3 point hitch mount is designed for power and function. Attached to your tractor by a rigid top link and the lower arms in their lowest position this rugged power house is ready to take on all the heavy lifting and positioning. The built-in hydraulics are designed to provide, tilt for positioning, down pressure to help keep the frame in position and lift to get he Nomad out of the hole. These powerful tools are also field installable, meaning you can add a 3PH mount to an existing Nomad.
    

The 10M and 15M mounts bring the tree moving power of Nomad to your loader. Tractor loaders often have more lift capacity than skidsteers and in some cases give you greater flexibility in positioning, however because positioning around the tree to be moved is so critical and ground level visibility is limited on tractor loaders we recommend that using a Nomad on a loader is a two person job. Once the frame is positioned on the ground, the controls for the spades are located on the Nomad so that the operator has the best possible visibility during the spading operations.